driverlib/inc/hw_des.h

340 lines
19 KiB
C
Raw Permalink Normal View History

2019-10-20 07:12:45 +00:00
//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_DES_H__
#define __HW_DES_H__
//*****************************************************************************
//
// The following are defines for the DES_P register offsets.
//
//*****************************************************************************
#define DES_O_KEY3_L 0x00000000 // KEY3 (LSW) for 192-bit key
#define DES_O_KEY3_H 0x00000004 // KEY3 (MSW) for 192-bit key
#define DES_O_KEY2_L 0x00000008 // KEY2 (LSW) for 192-bit key
#define DES_O_KEY2_H 0x0000000C // KEY2 (MSW) for 192-bit key
#define DES_O_KEY1_L 0x00000010 // KEY1 (LSW) for 128-bit
// key/192-bit key
#define DES_O_KEY1_H 0x00000014 // KEY1 (LSW) for 128-bit
// key/192-bit key
#define DES_O_IV_L 0x00000018 // Initialization vector LSW
#define DES_O_IV_H 0x0000001C // Initialization vector MSW
#define DES_O_CTRL 0x00000020
#define DES_O_LENGTH 0x00000024 // Indicates the cryptographic data
// length in bytes for all modes.
// Once processing is started with
// this context this length
// decrements to zero. Data lengths
// up to (2^32 1) bytes are
// allowed. A write to this register
// triggers the engine to start
// using this context. For a Host
// read operation these registers
// return all-zeroes.
#define DES_O_DATA_L 0x00000028 // Data register(LSW) to read/write
// encrypted/decrypted data.
#define DES_O_DATA_H 0x0000002C // Data register(MSW) to read/write
// encrypted/decrypted data.
#define DES_O_REVISION 0x00000030
#define DES_O_SYSCONFIG 0x00000034
#define DES_O_SYSSTATUS 0x00000038
#define DES_O_IRQSTATUS 0x0000003C // This register indicates the
// interrupt status. If one of the
// interrupt bits is set the
// interrupt output will be asserted
#define DES_O_IRQENABLE 0x00000040 // This register contains an enable
// bit for each unique interrupt
// generated by the module. It
// matches the layout of
// DES_IRQSTATUS register. An
// interrupt is enabled when the bit
// in this register is set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY3_L register.
//
//******************************************************************************
#define DES_KEY3_L_KEY3_L_M 0xFFFFFFFF // data for key3
#define DES_KEY3_L_KEY3_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY3_H register.
//
//******************************************************************************
#define DES_KEY3_H_KEY3_H_M 0xFFFFFFFF // data for key3
#define DES_KEY3_H_KEY3_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY2_L register.
//
//******************************************************************************
#define DES_KEY2_L_KEY2_L_M 0xFFFFFFFF // data for key2
#define DES_KEY2_L_KEY2_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY2_H register.
//
//******************************************************************************
#define DES_KEY2_H_KEY2_H_M 0xFFFFFFFF // data for key2
#define DES_KEY2_H_KEY2_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY1_L register.
//
//******************************************************************************
#define DES_KEY1_L_KEY1_L_M 0xFFFFFFFF // data for key1
#define DES_KEY1_L_KEY1_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY1_H register.
//
//******************************************************************************
#define DES_KEY1_H_KEY1_H_M 0xFFFFFFFF // data for key1
#define DES_KEY1_H_KEY1_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IV_L register.
//
//******************************************************************************
#define DES_IV_L_IV_L_M 0xFFFFFFFF // initialization vector for CBC
// CFB modes
#define DES_IV_L_IV_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IV_H register.
//
//******************************************************************************
#define DES_IV_H_IV_H_M 0xFFFFFFFF // initialization vector for CBC
// CFB modes
#define DES_IV_H_IV_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_CTRL register.
//
//******************************************************************************
#define DES_CTRL_CONTEXT 0x80000000 // If 1 this read-only status bit
// indicates that the context data
// registers can be overwritten and
// the host is permitted to write
// the next context.
#define DES_CTRL_MODE_M 0x00000030 // Select CBC ECB or CFB mode 0x0
// ecb mode 0x1 cbc mode 0x2 cfb
// mode 0x3 reserved
#define DES_CTRL_MODE_S 4
#define DES_CTRL_TDES 0x00000008 // Select DES or triple DES
// encryption/decryption. 0 des mode
// 1 tdes mode
#define DES_CTRL_DIRECTION 0x00000004 // select encryption/decryption 0
// decryption is selected 1
// Encryption is selected
#define DES_CTRL_INPUT_READY 0x00000002 // When '1' ready to
// encrypt/decrypt data
#define DES_CTRL_OUTPUT_READY 0x00000001 // When '1' Data
// decrypted/encrypted ready
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_LENGTH register.
//
//******************************************************************************
#define DES_LENGTH_LENGTH_M 0xFFFFFFFF
#define DES_LENGTH_LENGTH_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_DATA_L register.
//
//******************************************************************************
#define DES_DATA_L_DATA_L_M 0xFFFFFFFF // data for encryption/decryption
#define DES_DATA_L_DATA_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_DATA_H register.
//
//******************************************************************************
#define DES_DATA_H_DATA_H_M 0xFFFFFFFF // data for encryption/decryption
#define DES_DATA_H_DATA_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_REVISION register.
//
//******************************************************************************
#define DES_REVISION_SCHEME_M 0xC0000000
#define DES_REVISION_SCHEME_S 30
#define DES_REVISION_FUNC_M 0x0FFF0000 // Function indicates a software
// compatible module family. If
// there is no level of software
// compatibility a new Func number
// (and hence REVISION) should be
// assigned.
#define DES_REVISION_FUNC_S 16
#define DES_REVISION_R_RTL_M 0x0000F800 // RTL Version (R) maintained by IP
// design owner. RTL follows a
// numbering such as X.Y.R.Z which
// are explained in this table. R
// changes ONLY when: (1) PDS
// uploads occur which may have been
// due to spec changes (2) Bug fixes
// occur (3) Resets to '0' when X or
// Y changes. Design team has an
// internal 'Z' (customer invisible)
// number which increments on every
// drop that happens due to DV and
// RTL updates. Z resets to 0 when R
// increments.
#define DES_REVISION_R_RTL_S 11
#define DES_REVISION_X_MAJOR_M \
0x00000700 // Major Revision (X) maintained by
// IP specification owner. X changes
// ONLY when: (1) There is a major
// feature addition. An example
// would be adding Master Mode to
// Utopia Level2. The Func field (or
// Class/Type in old PID format)
// will remain the same. X does NOT
// change due to: (1) Bug fixes (2)
// Change in feature parameters.
#define DES_REVISION_X_MAJOR_S 8
#define DES_REVISION_CUSTOM_M 0x000000C0
#define DES_REVISION_CUSTOM_S 6
#define DES_REVISION_Y_MINOR_M \
0x0000003F // Minor Revision (Y) maintained by
// IP specification owner. Y changes
// ONLY when: (1) Features are
// scaled (up or down). Flexibility
// exists in that this feature
// scalability may either be
// represented in the Y change or a
// specific register in the IP that
// indicates which features are
// exactly available. (2) When
// feature creeps from Is-Not list
// to Is list. But this may not be
// the case once it sees silicon; in
// which case X will change. Y does
// NOT change due to: (1) Bug fixes
// (2) Typos or clarifications (3)
// major functional/feature
// change/addition/deletion. Instead
// these changes may be reflected
// via R S X as applicable. Spec
// owner maintains a
// customer-invisible number 'S'
// which changes due to: (1)
// Typos/clarifications (2) Bug
// documentation. Note that this bug
// is not due to a spec change but
// due to implementation.
// Nevertheless the spec tracks the
// IP bugs. An RTL release (say for
// silicon PG1.1) that occurs due to
// bug fix should document the
// corresponding spec number (X.Y.S)
// in its release notes.
#define DES_REVISION_Y_MINOR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_SYSCONFIG register.
//
//******************************************************************************
#define DES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \
0x00000080 // If set to 1 the DMA context
// request is enabled. 0 Dma
// disabled 1 Dma enabled
#define DES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \
0x00000040 // If set to 1 the DMA output
// request is enabled. 0 Dma
// disabled 1 Dma enabled
#define DES_SYSCONFIG_DMA_REQ_DATA_IN_EN \
0x00000020 // If set to 1 the DMA input
// request is enabled. 0 Dma
// disabled 1 Dma enabled
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_SYSSTATUS register.
//
//******************************************************************************
#define DES_SYSSTATUS_RESETDONE \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IRQSTATUS register.
//
//******************************************************************************
#define DES_IRQSTATUS_DATA_OUT \
0x00000004 // This bit indicates data output
// interrupt is active and triggers
// the interrupt output.
#define DES_IRQSTATUS_DATA_IN 0x00000002 // This bit indicates data input
// interrupt is active and triggers
// the interrupt output.
#define DES_IRQSTATUS_CONTEX_IN \
0x00000001 // This bit indicates context
// interrupt is active and triggers
// the interrupt output.
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IRQENABLE register.
//
//******************************************************************************
#define DES_IRQENABLE_M_DATA_OUT \
0x00000004 // If this bit is set to 1 the
// secure data output interrupt is
// enabled.
#define DES_IRQENABLE_M_DATA_IN \
0x00000002 // If this bit is set to 1 the
// secure data input interrupt is
// enabled.
#define DES_IRQENABLE_M_CONTEX_IN \
0x00000001 // If this bit is set to 1 the
// secure context interrupt is
// enabled.
#endif // __HW_DES_H__