cc3200/driverlib
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
82e712ef64
driverlib/inc/hw_adc.h

889 lines
49 KiB
C
Raw Normal View History

Initial commit
2019-10-20 07:12:45 +00:00
//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_ADC_H__
#define __HW_ADC_H__
//*****************************************************************************
//
// The following are defines for the ADC register offsets.
//
//*****************************************************************************
#define ADC_O_ADC_CTRL 0x00000000 // ADC control register.
#define ADC_O_adc_ch0_gain 0x00000004 // Channel 0 gain setting
#define ADC_O_adc_ch1_gain 0x00000008 // Channel 1 gain setting
#define ADC_O_adc_ch2_gain 0x0000000C // Channel 2 gain setting
#define ADC_O_adc_ch3_gain 0x00000010 // Channel 3 gain setting
#define ADC_O_adc_ch4_gain 0x00000014 // Channel 4 gain setting
#define ADC_O_adc_ch5_gain 0x00000018 // Channel 5 gain setting
#define ADC_O_adc_ch6_gain 0x0000001C // Channel 6 gain setting
#define ADC_O_adc_ch7_gain 0x00000020 // Channel 7 gain setting
#define ADC_O_adc_ch0_irq_en 0x00000024 // Channel 0 interrupt enable
// register
#define ADC_O_adc_ch1_irq_en 0x00000028 // Channel 1 interrupt enable
// register
#define ADC_O_adc_ch2_irq_en 0x0000002C // Channel 2 interrupt enable
// register
#define ADC_O_adc_ch3_irq_en 0x00000030 // Channel 3 interrupt enable
// register
#define ADC_O_adc_ch4_irq_en 0x00000034 // Channel 4 interrupt enable
// register
#define ADC_O_adc_ch5_irq_en 0x00000038 // Channel 5 interrupt enable
// register
#define ADC_O_adc_ch6_irq_en 0x0000003C // Channel 6 interrupt enable
// register
#define ADC_O_adc_ch7_irq_en 0x00000040 // Channel 7 interrupt enable
// register
#define ADC_O_adc_ch0_irq_status \
0x00000044 // Channel 0 interrupt status
// register
#define ADC_O_adc_ch1_irq_status \
0x00000048 // Channel 1 interrupt status
// register
#define ADC_O_adc_ch2_irq_status \
0x0000004C
#define ADC_O_adc_ch3_irq_status \
0x00000050 // Channel 3 interrupt status
// register
#define ADC_O_adc_ch4_irq_status \
0x00000054 // Channel 4 interrupt status
// register
#define ADC_O_adc_ch5_irq_status \
0x00000058
#define ADC_O_adc_ch6_irq_status \
0x0000005C // Channel 6 interrupt status
// register
#define ADC_O_adc_ch7_irq_status \
0x00000060 // Channel 7 interrupt status
// register
#define ADC_O_adc_dma_mode_en 0x00000064 // DMA mode enable register
#define ADC_O_adc_timer_configuration \
0x00000068 // ADC timer configuration register
#define ADC_O_adc_timer_current_count \
0x00000070 // ADC timer current count register
#define ADC_O_channel0FIFODATA 0x00000074 // CH0 FIFO DATA register
#define ADC_O_channel1FIFODATA 0x00000078 // CH1 FIFO DATA register
#define ADC_O_channel2FIFODATA 0x0000007C // CH2 FIFO DATA register
#define ADC_O_channel3FIFODATA 0x00000080 // CH3 FIFO DATA register
#define ADC_O_channel4FIFODATA 0x00000084 // CH4 FIFO DATA register
#define ADC_O_channel5FIFODATA 0x00000088 // CH5 FIFO DATA register
#define ADC_O_channel6FIFODATA 0x0000008C // CH6 FIFO DATA register
#define ADC_O_channel7FIFODATA 0x00000090 // CH7 FIFO DATA register
#define ADC_O_adc_ch0_fifo_lvl 0x00000094 // channel 0 FIFO Level register
#define ADC_O_adc_ch1_fifo_lvl 0x00000098 // Channel 1 interrupt status
// register
#define ADC_O_adc_ch2_fifo_lvl 0x0000009C
#define ADC_O_adc_ch3_fifo_lvl 0x000000A0 // Channel 3 interrupt status
// register
#define ADC_O_adc_ch4_fifo_lvl 0x000000A4 // Channel 4 interrupt status
// register
#define ADC_O_adc_ch5_fifo_lvl 0x000000A8
#define ADC_O_adc_ch6_fifo_lvl 0x000000AC // Channel 6 interrupt status
// register
#define ADC_O_adc_ch7_fifo_lvl 0x000000B0 // Channel 7 interrupt status
// register
#define ADC_O_ADC_CH_ENABLE 0x000000B8
//******************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ADC_CTRL register.
//
//******************************************************************************
#define ADC_ADC_CTRL_adc_cap_scale \
0x00000020 // ADC CAP SCALE.
#define ADC_ADC_CTRL_adc_buf_bypass \
0x00000010 // ADC ANA CIO buffer bypass.
// Signal is modelled in ANA TOP.
// When '1': ADC buffer is bypassed.
#define ADC_ADC_CTRL_adc_buf_en 0x00000008 // ADC ANA buffer enable. When 1:
// ADC buffer is enabled.
#define ADC_ADC_CTRL_adc_core_en \
0x00000004 // ANA ADC core en. This signal act
// as glbal enable to ADC CIO. When
// 1: ADC core is enabled.
#define ADC_ADC_CTRL_adc_soft_reset \
0x00000002 // ADC soft reset. When '1' : reset
// ADC internal logic.
#define ADC_ADC_CTRL_adc_en 0x00000001 // ADC global enable. When set ADC
// module is enabled
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch0_gain register.
//
//******************************************************************************
#define ADC_adc_ch0_gain_adc_channel0_gain_M \
0x00000003 // gain setting for ADC channel 0.
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch0_gain_adc_channel0_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch1_gain register.
//
//******************************************************************************
#define ADC_adc_ch1_gain_adc_channel1_gain_M \
0x00000003 // gain setting for ADC channel 1.
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch1_gain_adc_channel1_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch2_gain register.
//
//******************************************************************************
#define ADC_adc_ch2_gain_adc_channel2_gain_M \
0x00000003 // gain setting for ADC channel 2.
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch2_gain_adc_channel2_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch3_gain register.
//
//******************************************************************************
#define ADC_adc_ch3_gain_adc_channel3_gain_M \
0x00000003 // gain setting for ADC channel 3.
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch3_gain_adc_channel3_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch4_gain register.
//
//******************************************************************************
#define ADC_adc_ch4_gain_adc_channel4_gain_M \
0x00000003 // gain setting for ADC channel 4
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch4_gain_adc_channel4_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch5_gain register.
//
//******************************************************************************
#define ADC_adc_ch5_gain_adc_channel5_gain_M \
0x00000003 // gain setting for ADC channel 5.
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch5_gain_adc_channel5_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch6_gain register.
//
//******************************************************************************
#define ADC_adc_ch6_gain_adc_channel6_gain_M \
0x00000003 // gain setting for ADC channel 6
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch6_gain_adc_channel6_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch7_gain register.
//
//******************************************************************************
#define ADC_adc_ch7_gain_adc_channel7_gain_M \
0x00000003 // gain setting for ADC channel 7.
// when "00": 1x when "01: 2x when
// "10":3x when "11" 4x
#define ADC_adc_ch7_gain_adc_channel7_gain_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch0_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch0_irq_en_adc_channel0_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch0_irq_en_adc_channel0_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch1_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch1_irq_en_adc_channel1_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch1_irq_en_adc_channel1_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch2_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch2_irq_en_adc_channel2_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch2_irq_en_adc_channel2_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch3_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch3_irq_en_adc_channel3_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch3_irq_en_adc_channel3_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch4_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch4_irq_en_adc_channel4_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch4_irq_en_adc_channel4_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch5_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch5_irq_en_adc_channel5_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch5_irq_en_adc_channel5_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch6_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch6_irq_en_adc_channel6_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch6_irq_en_adc_channel6_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch7_irq_en register.
//
//******************************************************************************
#define ADC_adc_ch7_irq_en_adc_channel7_irq_en_M \
0x0000000F // interrupt enable register for
// per ADC channel bit 3: when '1'
// -> enable FIFO overflow interrupt
// bit 2: when '1' -> enable FIFO
// underflow interrupt bit 1: when
// "1' -> enable FIFO empty
// interrupt bit 0: when "1" ->
// enable FIFO full interrupt
#define ADC_adc_ch7_irq_en_adc_channel7_irq_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch0_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch0_irq_status_adc_channel0_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch0_irq_status_adc_channel0_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch1_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch1_irq_status_adc_channel1_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch1_irq_status_adc_channel1_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch2_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch2_irq_status_adc_channel2_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch2_irq_status_adc_channel2_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch3_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch3_irq_status_adc_channel3_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch3_irq_status_adc_channel3_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch4_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch4_irq_status_adc_channel4_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch4_irq_status_adc_channel4_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch5_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch5_irq_status_adc_channel5_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch5_irq_status_adc_channel5_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch6_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch6_irq_status_adc_channel6_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch6_irq_status_adc_channel6_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch7_irq_status register.
//
//******************************************************************************
#define ADC_adc_ch7_irq_status_adc_channel7_irq_status_M \
0x0000000F // interrupt status register for
// per ADC channel. Interrupt status
// can be cleared on write. bit 3:
// when value '1' is written ->
// would clear FIFO overflow
// interrupt status in the next
// cycle. if same interrupt is set
// in the same cycle then interurpt
// would be set and clear command
// will be ignored. bit 2: when
// value '1' is written -> would
// clear FIFO underflow interrupt
// status in the next cycle. bit 1:
// when value '1' is written ->
// would clear FIFO empty interrupt
// status in the next cycle. bit 0:
// when value '1' is written ->
// would clear FIFO full interrupt
// status in the next cycle.
#define ADC_adc_ch7_irq_status_adc_channel7_irq_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_dma_mode_en register.
//
//******************************************************************************
#define ADC_adc_dma_mode_en_DMA_MODEenable_M \
0x000000FF // this register enable DMA mode.
// when '1' respective ADC channel
// is enabled for DMA. When '0' only
// interrupt mode is enabled. Bit 0:
// channel 0 DMA mode enable. Bit 1:
// channel 1 DMA mode enable. Bit 2:
// channel 2 DMA mode enable. Bit 3:
// channel 3 DMA mode enable. bit 4:
// channel 4 DMA mode enable. bit 5:
// channel 5 DMA mode enable. bit 6:
// channel 6 DMA mode enable. bit 7:
// channel 7 DMA mode enable.
#define ADC_adc_dma_mode_en_DMA_MODEenable_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_timer_configuration register.
//
//******************************************************************************
#define ADC_adc_timer_configuration_timeren \
0x02000000 // when '1' timer is enabled.
#define ADC_adc_timer_configuration_timerreset \
0x01000000 // when '1' reset timer.
#define ADC_adc_timer_configuration_timercount_M \
0x00FFFFFF // Timer count configuration. 17
// bit counter is supported. Other
// MSB's are redundent.
#define ADC_adc_timer_configuration_timercount_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_timer_current_count register.
//
//******************************************************************************
#define ADC_adc_timer_current_count_timercurrentcount_M \
0x0001FFFF // Timer count configuration
#define ADC_adc_timer_current_count_timercurrentcount_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel0FIFODATA register.
//
//******************************************************************************
#define ADC_channel0FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel0FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel1FIFODATA register.
//
//******************************************************************************
#define ADC_channel1FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel1FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel2FIFODATA register.
//
//******************************************************************************
#define ADC_channel2FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel2FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel3FIFODATA register.
//
//******************************************************************************
#define ADC_channel3FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel3FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel4FIFODATA register.
//
//******************************************************************************
#define ADC_channel4FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel4FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel5FIFODATA register.
//
//******************************************************************************
#define ADC_channel5FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel5FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel6FIFODATA register.
//
//******************************************************************************
#define ADC_channel6FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel6FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_channel7FIFODATA register.
//
//******************************************************************************
#define ADC_channel7FIFODATA_FIFO_RD_DATA_M \
0xFFFFFFFF // read to this register would
// return ADC data along with time
// stamp information in following
// format: bits [13:0] : ADC sample
// bits [31:14]: : time stamp per
// ADC sample
#define ADC_channel7FIFODATA_FIFO_RD_DATA_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch0_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch0_fifo_lvl_adc_channel0_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch0_fifo_lvl_adc_channel0_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch1_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch1_fifo_lvl_adc_channel1_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch1_fifo_lvl_adc_channel1_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch2_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch2_fifo_lvl_adc_channel2_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch2_fifo_lvl_adc_channel2_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch3_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch3_fifo_lvl_adc_channel3_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch3_fifo_lvl_adc_channel3_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch4_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch4_fifo_lvl_adc_channel4_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch4_fifo_lvl_adc_channel4_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch5_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch5_fifo_lvl_adc_channel5_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch5_fifo_lvl_adc_channel5_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch6_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch6_fifo_lvl_adc_channel6_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch6_fifo_lvl_adc_channel6_fifo_lvl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// ADC_O_adc_ch7_fifo_lvl register.
//
//******************************************************************************
#define ADC_adc_ch7_fifo_lvl_adc_channel7_fifo_lvl_M \
0x00000007 // This register shows current FIFO
// level. FIFO is 4 word wide.
// Possible supported levels are :
// 0x0 to 0x3
#define ADC_adc_ch7_fifo_lvl_adc_channel7_fifo_lvl_S 0
#endif // __HW_ADC_H__
Reference in New Issue Copy Permalink