cc3200/driverlib
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
82e712ef64
driverlib/inc/hw_gprcm.h

3323 lines
166 KiB
C
Raw Normal View History

Initial commit
2019-10-20 07:12:45 +00:00
//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_GPRCM_H__
#define __HW_GPRCM_H__
//*****************************************************************************
//
// The following are defines for the GPRCM register offsets.
//
//*****************************************************************************
#define GPRCM_O_APPS_SOFT_RESET 0x00000000
#define GPRCM_O_APPS_LPDS_WAKEUP_CFG \
0x00000004
#define GPRCM_O_APPS_LPDS_WAKEUP_SRC \
0x00000008
#define GPRCM_O_APPS_RESET_CAUSE \
0x0000000C
#define GPRCM_O_APPS_LPDS_WAKETIME_OPP_CFG \
0x00000010
#define GPRCM_O_APPS_SRAM_DSLP_CFG \
0x00000018
#define GPRCM_O_APPS_SRAM_LPDS_CFG \
0x0000001C
#define GPRCM_O_APPS_LPDS_WAKETIME_WAKE_CFG \
0x00000020
#define GPRCM_O_TOP_DIE_ENABLE 0x00000100
#define GPRCM_O_TOP_DIE_ENABLE_PARAMETERS \
0x00000104
#define GPRCM_O_MCU_GLOBAL_SOFT_RESET \
0x00000108
#define GPRCM_O_ADC_CLK_CONFIG 0x0000010C
#define GPRCM_O_APPS_GPIO_WAKE_CONF \
0x00000110
#define GPRCM_O_EN_NWP_BOOT_WO_DEVINIT \
0x00000114
#define GPRCM_O_MEM_HCLK_DIV_CFG \
0x00000118
#define GPRCM_O_MEM_SYSCLK_DIV_CFG \
0x0000011C
#define GPRCM_O_APLLMCS_LOCK_TIME_CONF \
0x00000120
#define GPRCM_O_NWP_SOFT_RESET 0x00000400
#define GPRCM_O_NWP_LPDS_WAKEUP_CFG \
0x00000404
#define GPRCM_O_NWP_LPDS_WAKEUP_SRC \
0x00000408
#define GPRCM_O_NWP_RESET_CAUSE 0x0000040C
#define GPRCM_O_NWP_LPDS_WAKETIME_OPP_CFG \
0x00000410
#define GPRCM_O_NWP_SRAM_DSLP_CFG \
0x00000418
#define GPRCM_O_NWP_SRAM_LPDS_CFG \
0x0000041C
#define GPRCM_O_NWP_LPDS_WAKETIME_WAKE_CFG \
0x00000420
#define GPRCM_O_NWP_AUTONMS_SPI_MASTER_SEL \
0x00000424
#define GPRCM_O_NWP_AUTONMS_SPI_IDLE_REQ \
0x00000428
#define GPRCM_O_WLAN_TO_NWP_WAKE_REQUEST \
0x0000042C
#define GPRCM_O_NWP_TO_WLAN_WAKE_REQUEST \
0x00000430
#define GPRCM_O_NWP_GPIO_WAKE_CONF \
0x00000434
#define GPRCM_O_GPRCM_EFUSE_READ_REG12 \
0x00000438
#define GPRCM_O_GPRCM_DIEID_READ_REG5 \
0x00000448
#define GPRCM_O_GPRCM_DIEID_READ_REG6 \
0x0000044C
#define GPRCM_O_REF_FSM_CFG0 0x00000800
#define GPRCM_O_REF_FSM_CFG1 0x00000804
#define GPRCM_O_APLLMCS_WLAN_CONFIG0_40 \
0x00000808
#define GPRCM_O_APLLMCS_WLAN_CONFIG1_40 \
0x0000080C
#define GPRCM_O_APLLMCS_WLAN_CONFIG0_26 \
0x00000810
#define GPRCM_O_APLLMCS_WLAN_CONFIG1_26 \
0x00000814
#define GPRCM_O_APLLMCS_WLAN_OVERRIDES \
0x00000818
#define GPRCM_O_APLLMCS_MCU_RUN_CONFIG0_38P4 \
0x0000081C
#define GPRCM_O_APLLMCS_MCU_RUN_CONFIG1_38P4 \
0x00000820
#define GPRCM_O_APLLMCS_MCU_RUN_CONFIG0_26 \
0x00000824
#define GPRCM_O_APLLMCS_MCU_RUN_CONFIG1_26 \
0x00000828
#define GPRCM_O_SPARE_RW0 0x0000082C
#define GPRCM_O_SPARE_RW1 0x00000830
#define GPRCM_O_APLLMCS_MCU_OVERRIDES \
0x00000834
#define GPRCM_O_SYSCLK_SWITCH_STATUS \
0x00000838
#define GPRCM_O_REF_LDO_CONTROLS \
0x0000083C
#define GPRCM_O_REF_RTRIM_CONTROL \
0x00000840
#define GPRCM_O_REF_SLICER_CONTROLS0 \
0x00000844
#define GPRCM_O_REF_SLICER_CONTROLS1 \
0x00000848
#define GPRCM_O_REF_ANA_BGAP_CONTROLS0 \
0x0000084C
#define GPRCM_O_REF_ANA_BGAP_CONTROLS1 \
0x00000850
#define GPRCM_O_REF_ANA_SPARE_CONTROLS0 \
0x00000854
#define GPRCM_O_REF_ANA_SPARE_CONTROLS1 \
0x00000858
#define GPRCM_O_MEMSS_PSCON_OVERRIDES0 \
0x0000085C
#define GPRCM_O_MEMSS_PSCON_OVERRIDES1 \
0x00000860
#define GPRCM_O_PLL_REF_LOCK_OVERRIDES \
0x00000864
#define GPRCM_O_MCU_PSCON_DEBUG 0x00000868
#define GPRCM_O_MEMSS_PWR_PS 0x0000086C
#define GPRCM_O_REF_FSM_DEBUG 0x00000870
#define GPRCM_O_MEM_SYS_OPP_REQ_OVERRIDE \
0x00000874
#define GPRCM_O_MEM_TESTCTRL_PD_OPP_CONFIG \
0x00000878
#define GPRCM_O_MEM_WL_FAST_CLK_REQ_OVERRIDES \
0x0000087C
#define GPRCM_O_MEM_MCU_PD_MODE_REQ_OVERRIDES \
0x00000880
#define GPRCM_O_MEM_MCSPI_SRAM_OFF_REQ_OVERRIDES \
0x00000884
#define GPRCM_O_MEM_WLAN_APLLMCS_OVERRIDES \
0x00000888
#define GPRCM_O_MEM_REF_FSM_CFG2 \
0x0000088C
#define GPRCM_O_TESTCTRL_POWER_CTRL \
0x00000C10
#define GPRCM_O_SSDIO_POWER_CTRL \
0x00000C14
#define GPRCM_O_MCSPI_N1_POWER_CTRL \
0x00000C18
#define GPRCM_O_WELP_POWER_CTRL 0x00000C1C
#define GPRCM_O_WL_SDIO_POWER_CTRL \
0x00000C20
#define GPRCM_O_WLAN_SRAM_ACTIVE_PWR_CFG \
0x00000C24
#define GPRCM_O_WLAN_SRAM_SLEEP_PWR_CFG \
0x00000C28
#define GPRCM_O_APPS_SECURE_INIT_DONE \
0x00000C30
#define GPRCM_O_APPS_DEV_MODE_INIT_DONE \
0x00000C34
#define GPRCM_O_EN_APPS_REBOOT 0x00000C38
#define GPRCM_O_MEM_APPS_PERIPH_PRESENT \
0x00000C3C
#define GPRCM_O_MEM_NWP_PERIPH_PRESENT \
0x00000C40
#define GPRCM_O_MEM_SHARED_PERIPH_PRESENT \
0x00000C44
#define GPRCM_O_NWP_PWR_STATE 0x00000C48
#define GPRCM_O_APPS_PWR_STATE 0x00000C4C
#define GPRCM_O_MCU_PWR_STATE 0x00000C50
#define GPRCM_O_WTOP_PM_PS 0x00000C54
#define GPRCM_O_WTOP_PD_RESETZ_OVERRIDE_REG \
0x00000C58
#define GPRCM_O_WELP_PD_RESETZ_OVERRIDE_REG \
0x00000C5C
#define GPRCM_O_WL_SDIO_PD_RESETZ_OVERRIDE_REG \
0x00000C60
#define GPRCM_O_SSDIO_PD_RESETZ_OVERRIDE_REG \
0x00000C64
#define GPRCM_O_MCSPI_N1_PD_RESETZ_OVERRIDE_REG \
0x00000C68
#define GPRCM_O_TESTCTRL_PD_RESETZ_OVERRIDE_REG \
0x00000C6C
#define GPRCM_O_MCU_PD_RESETZ_OVERRIDE_REG \
0x00000C70
#define GPRCM_O_GPRCM_EFUSE_READ_REG0 \
0x00000C78
#define GPRCM_O_GPRCM_EFUSE_READ_REG1 \
0x00000C7C
#define GPRCM_O_GPRCM_EFUSE_READ_REG2 \
0x00000C80
#define GPRCM_O_GPRCM_EFUSE_READ_REG3 \
0x00000C84
#define GPRCM_O_WTOP_MEM_RET_CFG \
0x00000C88
#define GPRCM_O_COEX_CLK_SWALLOW_CFG0 \
0x00000C8C
#define GPRCM_O_COEX_CLK_SWALLOW_CFG1 \
0x00000C90
#define GPRCM_O_COEX_CLK_SWALLOW_CFG2 \
0x00000C94
#define GPRCM_O_COEX_CLK_SWALLOW_ENABLE \
0x00000C98
#define GPRCM_O_DCDC_CLK_GEN_CONFIG \
0x00000C9C
#define GPRCM_O_GPRCM_EFUSE_READ_REG4 \
0x00000CA0
#define GPRCM_O_GPRCM_EFUSE_READ_REG5 \
0x00000CA4
#define GPRCM_O_GPRCM_EFUSE_READ_REG6 \
0x00000CA8
#define GPRCM_O_GPRCM_EFUSE_READ_REG7 \
0x00000CAC
#define GPRCM_O_GPRCM_EFUSE_READ_REG8 \
0x00000CB0
#define GPRCM_O_GPRCM_EFUSE_READ_REG9 \
0x00000CB4
#define GPRCM_O_GPRCM_EFUSE_READ_REG10 \
0x00000CB8
#define GPRCM_O_GPRCM_EFUSE_READ_REG11 \
0x00000CBC
#define GPRCM_O_GPRCM_DIEID_READ_REG0 \
0x00000CC0
#define GPRCM_O_GPRCM_DIEID_READ_REG1 \
0x00000CC4
#define GPRCM_O_GPRCM_DIEID_READ_REG2 \
0x00000CC8
#define GPRCM_O_GPRCM_DIEID_READ_REG3 \
0x00000CCC
#define GPRCM_O_GPRCM_DIEID_READ_REG4 \
0x00000CD0
#define GPRCM_O_APPS_SS_OVERRIDES \
0x00000CD4
#define GPRCM_O_NWP_SS_OVERRIDES \
0x00000CD8
#define GPRCM_O_SHARED_SS_OVERRIDES \
0x00000CDC
#define GPRCM_O_IDMEM_CORE_RST_OVERRIDES \
0x00000CE0
#define GPRCM_O_TOP_DIE_FSM_OVERRIDES \
0x00000CE4
#define GPRCM_O_MCU_PSCON_OVERRIDES \
0x00000CE8
#define GPRCM_O_WTOP_PSCON_OVERRIDES \
0x00000CEC
#define GPRCM_O_WELP_PSCON_OVERRIDES \
0x00000CF0
#define GPRCM_O_WL_SDIO_PSCON_OVERRIDES \
0x00000CF4
#define GPRCM_O_MCSPI_PSCON_OVERRIDES \
0x00000CF8
#define GPRCM_O_SSDIO_PSCON_OVERRIDES \
0x00000CFC
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_SOFT_RESET register.
//
//******************************************************************************
#define GPRCM_APPS_SOFT_RESET_APPS_SOFT_RESET1 \
0x00000002 // Soft-reset1 for APPS : Cortex
// sysrstn is asserted and in
// addition to that the associated
// APPS Peripherals are also reset.
// This is an auto-clear bit.
#define GPRCM_APPS_SOFT_RESET_APPS_SOFT_RESET0 \
0x00000001 // Soft-reset0 for APPS : Only
// sys-resetn for Cortex will be
// asserted. This is an auto-clear
// bit.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_LPDS_WAKEUP_CFG register.
//
//******************************************************************************
#define GPRCM_APPS_LPDS_WAKEUP_CFG_APPS_LPDS_WAKEUP_CFG_M \
0x000000FF // Mask for LPDS Wakeup interrupt :
// [7] - Host IRQ from NWP [6] -
// NWP_LPDS_Wake_irq (TRUE_LPDS) [5]
// - NWP Wake-request to APPS [4] -
// GPIO [3:1] - Reserved [0] - LPDS
// Wakeup-timer
#define GPRCM_APPS_LPDS_WAKEUP_CFG_APPS_LPDS_WAKEUP_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_LPDS_WAKEUP_SRC register.
//
//******************************************************************************
#define GPRCM_APPS_LPDS_WAKEUP_SRC_APPS_LPDS_WAKEUP_SRC_M \
0x000000FF // Indicates the cause for wakeup
// from LPDS : [7] - Host IRQ from
// NWP [6] - NWP_LPDS_Wake_irq
// (TRUE_LPDS) [5] - NWP
// Wake-request to APPS [4] - GPIO
// [3:1] - Reserved [0] - LPDS
// Wakeup-timer
#define GPRCM_APPS_LPDS_WAKEUP_SRC_APPS_LPDS_WAKEUP_SRC_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_RESET_CAUSE register.
//
//******************************************************************************
#define GPRCM_APPS_RESET_CAUSE_APPS_RESET_CAUSE_M \
0x000000FF // Indicates the reset cause for
// APPS : "0000" - Wake from HIB/OFF
// mode; "0001" - Wake from LPDS ;
// "0010" - Reserved ; "0011" -
// Soft-reset0 (Only APPS
// Cortex-sysrstn is asserted);
// "0100" - Soft-reset1 (APPS
// Cortex-sysrstn and APPS
// peripherals are reset); "0101" -
// WDOG0 (APPS Cortex-sysrstn and
// APPS peripherals are reset);
// "0110" - MCU Soft-reset (APPS +
// NWP Cortex-sysrstn + Peripherals
// are reset); "0111" - Secure Init
// done (Indication that reset has
// happened after DevInit); "1000" -
// Dev Mode Patch Init done (During
// development mode, patch
// downloading and Cortex
// re-vectoring is completed)
#define GPRCM_APPS_RESET_CAUSE_APPS_RESET_CAUSE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_LPDS_WAKETIME_OPP_CFG register.
//
//******************************************************************************
#define GPRCM_APPS_LPDS_WAKETIME_OPP_CFG_APPS_LPDS_WAKETIME_OPP_CFG_M \
0xFFFFFFFF // OPP Request Configuration
// (Number of slow-clk cycles) for
// LPDS Wake-timer : This
// configuration implies the RTC
// time-stamp, which must be few
// slow-clks prior to
// APPS_LPDS_WAKETIME_WAKE_CFG, such
// that by the time actual wakeup is
// given, OPP is already switched to
// ACTIVE (RUN).
#define GPRCM_APPS_LPDS_WAKETIME_OPP_CFG_APPS_LPDS_WAKETIME_OPP_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_SRAM_DSLP_CFG register.
//
//******************************************************************************
#define GPRCM_APPS_SRAM_DSLP_CFG_APPS_SRAM_DSLP_CFG_M \
0x000FFFFF // Configuration of APPS Memories
// during Deep-sleep : 0 - SRAMs are
// OFF ; 1 - SRAMs are Retained.
// APPS SRAM Cluster information :
// [0] - 1st column in MEMSS
// (Applicable only when owned by
// APPS); [1] - 2nd column in MEMSS
// (Applicable only when owned by
// APPS); [2] - 3rd column in MEMSS
// (Applicable only when owned by
// APPS) ; [3] - 4th column in MEMSS
// (Applicable only when owned by
// APPS) ; [16] - MCU-PD - Apps
// cluster 0 (TBD); [19:18] -
// Reserved.
#define GPRCM_APPS_SRAM_DSLP_CFG_APPS_SRAM_DSLP_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_SRAM_LPDS_CFG register.
//
//******************************************************************************
#define GPRCM_APPS_SRAM_LPDS_CFG_APPS_SRAM_LPDS_CFG_M \
0x000FFFFF // Configuration of APPS Memories
// during LPDS : 0 - SRAMs are OFF ;
// 1 - SRAMs are Retained. APPS SRAM
// Cluster information : [0] - 1st
// column in MEMSS (Applicable only
// when owned by APPS); [1] - 2nd
// column in MEMSS (Applicable only
// when owned by APPS); [2] - 3rd
// column in MEMSS (Applicable only
// when owned by APPS) ; [3] - 4th
// column in MEMSS (Applicable only
// when owned by APPS) ; [16] -
// MCU-PD - Apps cluster 0 (TBD);
// [19:18] - Reserved.
#define GPRCM_APPS_SRAM_LPDS_CFG_APPS_SRAM_LPDS_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_LPDS_WAKETIME_WAKE_CFG register.
//
//******************************************************************************
#define GPRCM_APPS_LPDS_WAKETIME_WAKE_CFG_APPS_LPDS_WAKETIME_WAKE_CFG_M \
0xFFFFFFFF // Configuration (in no of
// slow_clks) which says when the
// actual wakeup request for
// removing the PD-reset be given.
#define GPRCM_APPS_LPDS_WAKETIME_WAKE_CFG_APPS_LPDS_WAKETIME_WAKE_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_TOP_DIE_ENABLE register.
//
//******************************************************************************
#define GPRCM_TOP_DIE_ENABLE_FLASH_BUSY \
0x00001000
#define GPRCM_TOP_DIE_ENABLE_TOP_DIE_PWR_PS_M \
0x00000F00
#define GPRCM_TOP_DIE_ENABLE_TOP_DIE_PWR_PS_S 8
#define GPRCM_TOP_DIE_ENABLE_TOP_DIE_ENABLE_STATUS \
0x00000002 // 1 - Top-die is enabled ;
#define GPRCM_TOP_DIE_ENABLE_TOP_DIE_ENABLE \
0x00000001 // 1 - Enable the top-die ; 0 -
// Disable the top-die
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_TOP_DIE_ENABLE_PARAMETERS register.
//
//******************************************************************************
#define GPRCM_TOP_DIE_ENABLE_PARAMETERS_FLASH_3P3_RSTN2D2D_POR_RSTN_M \
0xF0000000 // Configuration (in slow_clks) for
// number of clks between
// Flash-3p3-rstn to D2D POR Resetn.
#define GPRCM_TOP_DIE_ENABLE_PARAMETERS_FLASH_3P3_RSTN2D2D_POR_RSTN_S 28
#define GPRCM_TOP_DIE_ENABLE_PARAMETERS_TOP_DIE_SW_EN2TOP_DIE_FLASH_3P3_RSTN_M \
0x00FF0000 // Configuration (in slow_clks) for
// number of clks between Top-die
// Switch-Enable and Top-die Flash
// 3p3 Reset removal
#define GPRCM_TOP_DIE_ENABLE_PARAMETERS_TOP_DIE_SW_EN2TOP_DIE_FLASH_3P3_RSTN_S 16
#define GPRCM_TOP_DIE_ENABLE_PARAMETERS_TOP_DIE_POR_RSTN2BOTT_DIE_FMC_RSTN_M \
0x000000FF // Configuration (in slow_clks) for
// number of clks between D2D POR
// Reset removal and bottom die FMC
// reset removal
#define GPRCM_TOP_DIE_ENABLE_PARAMETERS_TOP_DIE_POR_RSTN2BOTT_DIE_FMC_RSTN_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCU_GLOBAL_SOFT_RESET register.
//
//******************************************************************************
#define GPRCM_MCU_GLOBAL_SOFT_RESET_MCU_GLOBAL_SOFT_RESET \
0x00000001 // 1 - Assert the global reset for
// MCU (APPS + NWP) ; Asserts both
// Cortex sysrstn and its
// peripherals 0 - Deassert the
// global reset for MCU (APPS + NWP)
// ; Asserts both Cortex sysrstn and
// its peripherals Note : Reset for
// shared peripherals is not
// affected here.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_ADC_CLK_CONFIG register.
//
//******************************************************************************
#define GPRCM_ADC_CLK_CONFIG_ADC_CLKGEN_OFF_TIME_M \
0x000007C0 // Configuration (in number of 38.4
// MHz clks) for the OFF-Time in
// generation of ADC_CLK
#define GPRCM_ADC_CLK_CONFIG_ADC_CLKGEN_OFF_TIME_S 6
#define GPRCM_ADC_CLK_CONFIG_ADC_CLKGEN_ON_TIME_M \
0x0000003E // Configuration (in number of 38.4
// MHz clks) for the ON-Time in
// generation of ADC_CLK
#define GPRCM_ADC_CLK_CONFIG_ADC_CLKGEN_ON_TIME_S 1
#define GPRCM_ADC_CLK_CONFIG_ADC_CLK_ENABLE \
0x00000001 // 1 - Enable the ADC_CLK ; 0 -
// Disable the ADC_CLK
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_GPIO_WAKE_CONF register.
//
//******************************************************************************
#define GPRCM_APPS_GPIO_WAKE_CONF_APPS_GPIO_WAKE_CONF_M \
0x00000003 // "00" - Wake on Level0 on
// selected GPIO pin (GPIO is
// selected inside the HIB3p3
// module); "01" - Wakeup on
// fall-edge of GPIO pin.
#define GPRCM_APPS_GPIO_WAKE_CONF_APPS_GPIO_WAKE_CONF_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_EN_NWP_BOOT_WO_DEVINIT register.
//
//******************************************************************************
#define GPRCM_EN_NWP_BOOT_WO_DEVINIT_reserved_M \
0xFFFFFFFE
#define GPRCM_EN_NWP_BOOT_WO_DEVINIT_reserved_S 1
#define GPRCM_EN_NWP_BOOT_WO_DEVINIT_mem_en_nwp_boot_wo_devinit \
0x00000001 // 1 - Override the secure-mode
// done for booting up NWP (Wakeup
// NWP on its event independent of
// CM4 state) ; 0 - Donot override
// the secure-mode done for NWP boot
// (NWP must be enabled by CM4 only)
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_HCLK_DIV_CFG register.
//
//******************************************************************************
#define GPRCM_MEM_HCLK_DIV_CFG_mem_hclk_div_cfg_M \
0x00000007 // Division configuration for
// HCLKDIVOUT : "000" - Divide by 1
// ; "001" - Divide by 2 ; "010" -
// Divide by 3 ; "011" - Divide by 4
// ; "100" - Divide by 5 ; "101" -
// Divide by 6 ; "110" - Divide by 7
// ; "111" - Divide by 8
#define GPRCM_MEM_HCLK_DIV_CFG_mem_hclk_div_cfg_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_SYSCLK_DIV_CFG register.
//
//******************************************************************************
#define GPRCM_MEM_SYSCLK_DIV_CFG_mem_sysclk_div_off_time_M \
0x00000038
#define GPRCM_MEM_SYSCLK_DIV_CFG_mem_sysclk_div_off_time_S 3
#define GPRCM_MEM_SYSCLK_DIV_CFG_mem_sysclk_div_on_time_M \
0x00000007
#define GPRCM_MEM_SYSCLK_DIV_CFG_mem_sysclk_div_on_time_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_LOCK_TIME_CONF register.
//
//******************************************************************************
#define GPRCM_APLLMCS_LOCK_TIME_CONF_mem_apllmcs_wlan_lock_time_M \
0x0000FF00
#define GPRCM_APLLMCS_LOCK_TIME_CONF_mem_apllmcs_wlan_lock_time_S 8
#define GPRCM_APLLMCS_LOCK_TIME_CONF_mem_apllmcs_mcu_lock_time_M \
0x000000FF
#define GPRCM_APLLMCS_LOCK_TIME_CONF_mem_apllmcs_mcu_lock_time_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_SOFT_RESET register.
//
//******************************************************************************
#define GPRCM_NWP_SOFT_RESET_NWP_SOFT_RESET1 \
0x00000002 // Soft-reset1 for NWP - Cortex
// sysrstn and NWP associated
// peripherals are - This is an
// auto-clr bit.
#define GPRCM_NWP_SOFT_RESET_NWP_SOFT_RESET0 \
0x00000001 // Soft-reset0 for NWP - Only
// Cortex-sysrstn is asserted - This
// is an auto-clear bit.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_LPDS_WAKEUP_CFG register.
//
//******************************************************************************
#define GPRCM_NWP_LPDS_WAKEUP_CFG_NWP_LPDS_WAKEUP_CFG_M \
0x000000FF // Mask for LPDS Wakeup interrupt :
// 7 - WLAN Host Interrupt ; 6 -
// WLAN to NWP Wake request ; 5 -
// APPS to NWP Wake request; 4 -
// GPIO Wakeup ; 3 - Autonomous UART
// Wakeup ; 2 - SSDIO Wakeup ; 1 -
// Autonomous SPI Wakeup ; 0 - LPDS
// Wakeup-timer
#define GPRCM_NWP_LPDS_WAKEUP_CFG_NWP_LPDS_WAKEUP_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_LPDS_WAKEUP_SRC register.
//
//******************************************************************************
#define GPRCM_NWP_LPDS_WAKEUP_SRC_NWP_LPDS_WAKEUP_SRC_M \
0x000000FF // Indicates the cause for NWP
// LPDS-Wakeup : 7 - WLAN Host
// Interrupt ; 6 - WLAN to NWP Wake
// request ; 5 - APPS to NWP Wake
// request; 4 - GPIO Wakeup ; 3 -
// Autonomous UART Wakeup ; 2 -
// SSDIO Wakeup ; 1 - Autonomous SPI
// Wakeup ; 0 - LPDS Wakeup-timer
#define GPRCM_NWP_LPDS_WAKEUP_SRC_NWP_LPDS_WAKEUP_SRC_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_RESET_CAUSE register.
//
//******************************************************************************
#define GPRCM_NWP_RESET_CAUSE_NWP_RESET_CAUSE_M \
0x000000FF // Indicates the reset cause for
// NWP : "0000" - Wake from HIB/OFF
// mode; "0001" - Wake from LPDS ;
// "0010" - Reserved ; "0011" -
// Soft-reset0 (Only NWP
// Cortex-sysrstn is asserted);
// "0100" - Soft-reset1 (NWP
// Cortex-sysrstn and NWP
// peripherals are reset); "0101" -
// WDOG0 (NWP Cortex-sysrstn and NWP
// peripherals are reset); "0110" -
// MCU Soft-reset (APPS + NWP
// Cortex-sysrstn + Peripherals are
// reset); "0111" - SSDIO Function2
// reset (Only Cortex-sysrstn is
// asserted) ; "1000" - Reset due to
// WDOG of APPS (NWP Cortex-sysrstn
// and NWP peripherals are reset);
#define GPRCM_NWP_RESET_CAUSE_NWP_RESET_CAUSE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_LPDS_WAKETIME_OPP_CFG register.
//
//******************************************************************************
#define GPRCM_NWP_LPDS_WAKETIME_OPP_CFG_NWP_LPDS_WAKETIME_OPP_CFG_M \
0xFFFFFFFF // OPP Request Configuration
// (Number of slow-clk cycles) for
// LPDS Wake-timer
#define GPRCM_NWP_LPDS_WAKETIME_OPP_CFG_NWP_LPDS_WAKETIME_OPP_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_SRAM_DSLP_CFG register.
//
//******************************************************************************
#define GPRCM_NWP_SRAM_DSLP_CFG_NWP_SRAM_DSLP_CFG_M \
0x000FFFFF // Configuration of NWP Memories
// during DSLP : 0 - SRAMs are OFF ;
// 1 - SRAMs are Retained. NWP SRAM
// Cluster information : [2] - 3rd
// column in MEMSS (Applicable only
// when owned by NWP) ; [3] - 4th
// column in MEMSS (Applicable only
// when owned by NWP) ; [4] - 5th
// column in MEMSS (Applicable only
// when owned by NWP) ; [5] - 6th
// column in MEMSS (Applicable only
// when owned by NWP) ; [6] - 7th
// column in MEMSS (Applicable only
// when owned by NWP) ; [7] - 8th
// column in MEMSS (Applicable only
// when owned by NWP) ; [8] - 9th
// column in MEMSS (Applicable only
// when owned by NWP) ; [9] - 10th
// column in MEMSS (Applicable only
// when owned by NWP) ; [10] - 11th
// column in MEMSS (Applicable only
// when owned by NWP) ; [11] - 12th
// column in MEMSS (Applicable only
// when owned by NWP) ; [12] - 13th
// column in MEMSS (Applicable only
// when owned by NWP) ; [13] - 14th
// column in MEMSS (Applicable only
// when owned by NWP) ; [14] - 15th
// column in MEMSS (Applicable only
// when owned by NWP) ; [19:18] -
// Reserved.
#define GPRCM_NWP_SRAM_DSLP_CFG_NWP_SRAM_DSLP_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_SRAM_LPDS_CFG register.
//
//******************************************************************************
#define GPRCM_NWP_SRAM_LPDS_CFG_NWP_SRAM_LPDS_CFG_M \
0x000FFFFF // Configuration of NWP Memories
// during LPDS : 0 - SRAMs are OFF ;
// 1 - SRAMs are Retained. NWP SRAM
// Cluster information : [2] - 3rd
// column in MEMSS (Applicable only
// when owned by NWP) ; [3] - 4th
// column in MEMSS (Applicable only
// when owned by NWP) ; [4] - 5th
// column in MEMSS (Applicable only
// when owned by NWP) ; [5] - 6th
// column in MEMSS (Applicable only
// when owned by NWP) ; [6] - 7th
// column in MEMSS (Applicable only
// when owned by NWP) ; [7] - 8th
// column in MEMSS (Applicable only
// when owned by NWP) ; [8] - 9th
// column in MEMSS (Applicable only
// when owned by NWP) ; [9] - 10th
// column in MEMSS (Applicable only
// when owned by NWP) ; [10] - 11th
// column in MEMSS (Applicable only
// when owned by NWP) ; [11] - 12th
// column in MEMSS (Applicable only
// when owned by NWP) ; [12] - 13th
// column in MEMSS (Applicable only
// when owned by NWP) ; [13] - 14th
// column in MEMSS (Applicable only
// when owned by NWP) ; [14] - 15th
// column in MEMSS (Applicable only
// when owned by NWP) ; [19:18] -
// Reserved.
#define GPRCM_NWP_SRAM_LPDS_CFG_NWP_SRAM_LPDS_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_LPDS_WAKETIME_WAKE_CFG register.
//
//******************************************************************************
#define GPRCM_NWP_LPDS_WAKETIME_WAKE_CFG_NWP_LPDS_WAKETIME_WAKE_CFG_M \
0xFFFFFFFF // Wake time configuration (no of
// slow clks) for NWP wake from
// LPDS.
#define GPRCM_NWP_LPDS_WAKETIME_WAKE_CFG_NWP_LPDS_WAKETIME_WAKE_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_AUTONMS_SPI_MASTER_SEL register.
//
//******************************************************************************
#define GPRCM_NWP_AUTONMS_SPI_MASTER_SEL_F_M \
0xFFFE0000
#define GPRCM_NWP_AUTONMS_SPI_MASTER_SEL_F_S 17
#define GPRCM_NWP_AUTONMS_SPI_MASTER_SEL_MEM_AUTONMS_SPI_MASTER_SEL \
0x00010000 // 0 - APPS is selected as host for
// Autonms SPI ; 1 - External host
// is selected as host for Autonms
// SPI
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_AUTONMS_SPI_IDLE_REQ register.
//
//******************************************************************************
#define GPRCM_NWP_AUTONMS_SPI_IDLE_REQ_NWP_AUTONMS_SPI_IDLE_WAKEUP \
0x00010000
#define GPRCM_NWP_AUTONMS_SPI_IDLE_REQ_NWP_AUTONMS_SPI_IDLE_ACK \
0x00000002 // When 1 => IDLE-mode is
// acknowledged by the SPI-IP. (This
// is for MCSPI_N1)
#define GPRCM_NWP_AUTONMS_SPI_IDLE_REQ_NWP_AUTONMS_SPI_IDLE_REQ \
0x00000001 // When 1 => Request for IDLE-mode
// for autonomous SPI. (This is for
// MCSPI_N1)
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WLAN_TO_NWP_WAKE_REQUEST register.
//
//******************************************************************************
#define GPRCM_WLAN_TO_NWP_WAKE_REQUEST_WLAN_TO_NWP_WAKE_REQUEST \
0x00000001 // 1 - Request for waking up NWP
// from any of its low-power modes
// (SLP/DSLP/LPDS)
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_TO_WLAN_WAKE_REQUEST register.
//
//******************************************************************************
#define GPRCM_NWP_TO_WLAN_WAKE_REQUEST_NWP_TO_WLAN_WAKE_REQUEST \
0x00000001 // 1 - Request for wakinp up WLAN
// from its ELP Mode (This gets
// triggered to ELP-logic of WLAN)
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_GPIO_WAKE_CONF register.
//
//******************************************************************************
#define GPRCM_NWP_GPIO_WAKE_CONF_NWP_GPIO_WAKE_CONF_M \
0x00000003 // "00" - Wakeup on level0 of the
// selected GPIO (GPIO gets selected
// inside HIB3P3-module); "01" -
// Wakeup on fall-edge of selected
// GPIO.
#define GPRCM_NWP_GPIO_WAKE_CONF_NWP_GPIO_WAKE_CONF_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG12 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG12_FUSEFARM_ROW_32_MSW_M \
0x0000FFFF // This corrsponds to ROW_32
// [31:16] of the FUSEFARM. SPARE
#define GPRCM_GPRCM_EFUSE_READ_REG12_FUSEFARM_ROW_32_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG5 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG5_FUSEFARM_ROW_10_M \
0xFFFFFFFF // Corresponds to ROW10 of FUSEFARM
// : [5:0] - ADC OFFSET ; [13:6] -
// TEMP_SENSE ; [14:14] - DFT_GSG ;
// [15:15] - FMC_DISABLE ; [31:16] -
// WLAN_MAC ID
#define GPRCM_GPRCM_DIEID_READ_REG5_FUSEFARM_ROW_10_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG6 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG6_FUSEFARM_ROW_11_M \
0xFFFFFFFF // Corresponds to ROW11 of FUSEFARM
// : [31:0] : WLAN MAC ID
#define GPRCM_GPRCM_DIEID_READ_REG6_FUSEFARM_ROW_11_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_FSM_CFG0 register.
//
//******************************************************************************
#define GPRCM_REF_FSM_CFG0_BGAP_SETTLING_TIME_M \
0x00FF0000 // ANA-BGAP Settling time (In
// number of slow_clks)
#define GPRCM_REF_FSM_CFG0_BGAP_SETTLING_TIME_S 16
#define GPRCM_REF_FSM_CFG0_FREF_LDO_SETTLING_TIME_M \
0x0000FF00 // Slicer LDO settling time (In
// number of slow clks)
#define GPRCM_REF_FSM_CFG0_FREF_LDO_SETTLING_TIME_S 8
#define GPRCM_REF_FSM_CFG0_DIG_BUF_SETTLING_TIME_M \
0x000000FF // Dig-buffer settling time (In
// number of slow clks)
#define GPRCM_REF_FSM_CFG0_DIG_BUF_SETTLING_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_FSM_CFG1 register.
//
//******************************************************************************
#define GPRCM_REF_FSM_CFG1_XTAL_SETTLING_TIME_M \
0xFF000000 // XTAL settling time (In number of
// slow clks)
#define GPRCM_REF_FSM_CFG1_XTAL_SETTLING_TIME_S 24
#define GPRCM_REF_FSM_CFG1_SLICER_LV_SETTLING_TIME_M \
0x00FF0000 // LV Slicer settling time
#define GPRCM_REF_FSM_CFG1_SLICER_LV_SETTLING_TIME_S 16
#define GPRCM_REF_FSM_CFG1_SLICER_HV_PD_SETTLING_TIME_M \
0x0000FF00 // HV Slicer Pull-down settling
// time
#define GPRCM_REF_FSM_CFG1_SLICER_HV_PD_SETTLING_TIME_S 8
#define GPRCM_REF_FSM_CFG1_SLICER_HV_SETTLING_TIME_M \
0x000000FF // HV Slicer settling time
#define GPRCM_REF_FSM_CFG1_SLICER_HV_SETTLING_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_WLAN_CONFIG0_40 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_WLAN_CONFIG0_40_APLLMCS_WLAN_N_40_M \
0x00007F00 // Configuration for WLAN APLLMCS -
// N[6:0], if the XTAL frequency is
// 40 MHz (Selected by efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG0_40_APLLMCS_WLAN_N_40_S 8
#define GPRCM_APLLMCS_WLAN_CONFIG0_40_APLLMCS_WLAN_M_40_M \
0x000000FF // Configuration for WLAN APLLMCS -
// M[7:0], if the XTAL frequency is
// 40 MHz (Selected by efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG0_40_APLLMCS_WLAN_M_40_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_WLAN_CONFIG1_40 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_WLAN_CONFIG1_40_APLLMCS_HISPEED_40 \
0x00000010 // Configuration for WLAN APLLMCS -
// if the XTAL frequency if 40 MHz
// (Selected by Efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG1_40_APLLMCS_SEL96_40 \
0x00000008 // Configuration for WLAN APLLMCS -
// Sel96, if the XTAL frequency is
// 40 MHz (Selected by Efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG1_40_APLLMCS_SELINPFREQ_40_M \
0x00000007 // Configuration for WLAN APLLMCS -
// Selinpfreq, if the XTAL frequency
// is 40 MHz (Selected by Efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG1_40_APLLMCS_SELINPFREQ_40_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_WLAN_CONFIG0_26 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_WLAN_CONFIG0_26_APLLMCS_WLAN_N_26_M \
0x00007F00 // Configuration for WLAN APLLMCS -
// N[6:0], if the XTAL frequency is
// 26 MHz (Selected by efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG0_26_APLLMCS_WLAN_N_26_S 8
#define GPRCM_APLLMCS_WLAN_CONFIG0_26_APLLMCS_WLAN_M_26_M \
0x000000FF // Configuration for WLAN APLLMCS -
// M[7:0], if the XTAL frequency is
// 26 MHz (Selected by efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG0_26_APLLMCS_WLAN_M_26_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_WLAN_CONFIG1_26 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_WLAN_CONFIG1_26_APLLMCS_HISPEED_26 \
0x00000010 // Configuration for WLAN APLLMCS -
// if the XTAL frequency if 26 MHz
// (Selected by Efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG1_26_APLLMCS_SEL96_26 \
0x00000008 // Configuration for WLAN APLLMCS -
// Sel96, if the XTAL frequency is
// 26 MHz (Selected by Efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG1_26_APLLMCS_SELINPFREQ_26_M \
0x00000007 // Configuration for WLAN APLLMCS -
// Selinpfreq, if the XTAL frequency
// is 26 MHz (Selected by Efuse)
#define GPRCM_APLLMCS_WLAN_CONFIG1_26_APLLMCS_SELINPFREQ_26_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_WLAN_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_POSTDIV_OVERRIDE_CTRL \
0x00080000
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_POSTDIV_OVERRIDE_M \
0x00070000
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_POSTDIV_OVERRIDE_S 16
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_SPARE_M \
0x00000700
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_SPARE_S 8
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_M_8_OVERRIDE_CTRL \
0x00000020 // Override control for
// WLAN_APLLMCS_M[8]. When set to1,
// M[8] will be selected by bit [3].
// (Else controlled from WTOP)
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_M_8_OVERRIDE \
0x00000010 // Override for WLAN_APLLMCS_M[8].
// Applicable only when bit [4] is
// set to 1. (Else controlled from
// WTOP)
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_N_7_8_OVERRIDE_CTRL \
0x00000004 // Override control for
// WLAN_APLLMCS_N[8:7]. When set
// to1, N[8:7] will be selected by
// bits [2:1]. (Else controlled from
// WTOP)
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_N_7_8_OVERRIDE_M \
0x00000003 // Override value for
// WLAN_APLLMCS_N[8:7] bits.
// Applicable only when bit [1] is
// set to 1. (Else controlled from
// WTOP)
#define GPRCM_APLLMCS_WLAN_OVERRIDES_APLLMCS_WLAN_N_7_8_OVERRIDE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_MCU_RUN_CONFIG0_38P4 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_POSTDIV_M \
0x38000000
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_POSTDIV_S 27
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_SPARE_M \
0x07000000
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_SPARE_S 24
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_N_38P4_M \
0x007F0000 // Configuration for MCU-APLLMCS :
// N during RUN mode. Selected if
// the XTAL frequency is 38.4 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_N_38P4_S 16
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_M_38P4_M \
0x0000FF00 // Configuration for MCU-APLLMCS :
// M during RUN mode. Selected if
// the XTAL frequency is 38.4 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_M_38P4_S 8
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_M_8_38P4 \
0x00000010 // Configuration for MCU-APLLMCS :
// M[8] during RUN mode. Selected if
// the XTAL frequency is 38.4 MHz
// (From Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_N_7_8_38P4_M \
0x00000003 // Configuration for MCU-APLLMCS :
// N[8:7] during RUN mode. Selected
// if the XTAL frequency is 38.4 MHz
// (From Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_38P4_APLLMCS_MCU_RUN_N_7_8_38P4_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_MCU_RUN_CONFIG1_38P4 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_38P4_APLLMCS_MCU_RUN_HISPEED_38P4 \
0x00000010 // Configuration for MCU-APLLMCS :
// HISPEED during RUN mode. Selected
// if the XTAL frequency is 38.4 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_38P4_APLLMCS_MCU_RUN_SEL96_38P4 \
0x00000008 // Configuration for MCU-APLLMCS :
// SEL96 during RUN mode. Selected
// if the XTAL frequency is 38.4 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_38P4_APLLMCS_MCU_RUN_SELINPFREQ_38P4_M \
0x00000007 // Configuration for MCU-APLLMCS :
// SELINPFREQ during RUN mode.
// Selected if the XTAL frequency is
// 38.4 MHz (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_38P4_APLLMCS_MCU_RUN_SELINPFREQ_38P4_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_MCU_RUN_CONFIG0_26 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_N_26_M \
0x007F0000 // Configuration for MCU-APLLMCS :
// N during RUN mode. Selected if
// the XTAL frequency is 26 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_N_26_S 16
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_M_26_M \
0x0000FF00 // Configuration for MCU-APLLMCS :
// M during RUN mode. Selected if
// the XTAL frequency is 26 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_M_26_S 8
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_M_8_26 \
0x00000010 // Configuration for MCU-APLLMCS :
// M[8] during RUN mode. Selected if
// the XTAL frequency is 26 MHz
// (From Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_N_7_8_26_M \
0x00000003 // Configuration for MCU-APLLMCS :
// N[8:7] during RUN mode. Selected
// if the XTAL frequency is 26 MHz
// (From Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG0_26_APLLMCS_MCU_RUN_N_7_8_26_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_MCU_RUN_CONFIG1_26 register.
//
//******************************************************************************
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_26_APLLMCS_MCU_RUN_HISPEED_26 \
0x00000010 // Configuration for MCU-APLLMCS :
// HISPEED during RUN mode. Selected
// if the XTAL frequency is 26 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_26_APLLMCS_MCU_RUN_SEL96_26 \
0x00000008 // Configuration for MCU-APLLMCS :
// SEL96 during RUN mode. Selected
// if the XTAL frequency is 26 MHz
// (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_26_APLLMCS_MCU_RUN_SELINPFREQ_26_M \
0x00000007 // Configuration for MCU-APLLMCS :
// SELINPFREQ during RUN mode.
// Selected if the XTAL frequency is
// 26 MHz (from Efuse)
#define GPRCM_APLLMCS_MCU_RUN_CONFIG1_26_APLLMCS_MCU_RUN_SELINPFREQ_26_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the GPRCM_O_SPARE_RW0 register.
//
//******************************************************************************
//******************************************************************************
//
// The following are defines for the bit fields in the GPRCM_O_SPARE_RW1 register.
//
//******************************************************************************
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APLLMCS_MCU_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_APLLMCS_MCU_OVERRIDES_APLLMCS_MCU_LOCK \
0x00000400 // 1 - APLLMCS_MCU is locked ; 0 -
// APLLMCS_MCU is not locked
#define GPRCM_APLLMCS_MCU_OVERRIDES_APLLMCS_MCU_ENABLE_OVERRIDE \
0x00000200 // Override for APLLMCS_MCU Enable.
// Applicable if bit [8] is set
#define GPRCM_APLLMCS_MCU_OVERRIDES_APLLMCS_MCU_ENABLE_OVERRIDE_CTRL \
0x00000100 // 1 - Enable for APLLMCS_MCU comes
// from bit [9]. 0 - Enable for
// APLLMCS_MCU comes from FSM.
#define GPRCM_APLLMCS_MCU_OVERRIDES_SYSCLK_SRC_OVERRIDE_M \
0x00000006 // Override for sysclk src
// (applicable only if bit [0] is
// set to 1. "00"- SLOW_CLK "01"-
// XTAL_CLK "10"- PLL_CLK
#define GPRCM_APLLMCS_MCU_OVERRIDES_SYSCLK_SRC_OVERRIDE_S 1
#define GPRCM_APLLMCS_MCU_OVERRIDES_SYSCLK_SRC_OVERRIDE_CTRL \
0x00000001 // 1 - Sysclk src is selected from
// bits [2:1] of this register. 0 -
// Sysclk src is selected from FSM
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_SYSCLK_SWITCH_STATUS register.
//
//******************************************************************************
#define GPRCM_SYSCLK_SWITCH_STATUS_SYSCLK_SWITCH_STATUS \
0x00000001 // 1 - Sysclk switching is
// complete. 0 - Sysclk switching is
// in progress.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_LDO_CONTROLS register.
//
//******************************************************************************
#define GPRCM_REF_LDO_CONTROLS_REF_LDO_ENABLE_OVERRIDE_CTRL \
0x00010000 // 1 - Enable for REF_LDO comes
// from bit [0] of this register ; 0
// - Enable for REF_LDO comes from
// the FSM. Note : Final REF_LDO_EN
// reaches on the port
// TOP_PM_REG2[0] of gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_SPARE_CONTROL_M \
0x0000C000 // Spare bits for REF_CTRL_FSM.
// Reaches directly on port
// TOP_PM_REG2[15:14] of gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_SPARE_CONTROL_S 14
#define GPRCM_REF_LDO_CONTROLS_REF_TLOAD_ENABLE_M \
0x00003800 // REF TLOAD Enable. Reaches
// directly on port
// TOP_PM_REG2[13:11] of gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_TLOAD_ENABLE_S 11
#define GPRCM_REF_LDO_CONTROLS_REF_LDO_TMUX_CONTROL_M \
0x00000700 // REF_LDO Test-mux control.
// Reaches directly on port
// TOP_PM_REG2[10:8] of gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_LDO_TMUX_CONTROL_S 8
#define GPRCM_REF_LDO_CONTROLS_REF_BW_CONTROL_M \
0x000000C0 // REF BW Control. Reaches directly
// on port TOP_PM_REG2[7:6] of
// gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_BW_CONTROL_S 6
#define GPRCM_REF_LDO_CONTROLS_REF_VTRIM_CONTROL_M \
0x0000003C // REF VTRIM Control. Reaches
// directly on port TOP_PM_REG2[5:2]
// of gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_VTRIM_CONTROL_S 2
#define GPRCM_REF_LDO_CONTROLS_REF_LDO_BYPASS_ENABLE \
0x00000002 // REF LDO Bypass Enable. Reaches
// directly on port TOP_PM_REG2[1]
// of gprcm.
#define GPRCM_REF_LDO_CONTROLS_REF_LDO_ENABLE \
0x00000001 // Override for REF_LDO Enable.
// Applicable only if bit [16] of
// this register is set. Note :
// Final REF_LDO_EN reaches on the
// port TOP_PM_REG2[0] of gprcm.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_RTRIM_CONTROL register.
//
//******************************************************************************
#define GPRCM_REF_RTRIM_CONTROL_TOP_PM_REG0_5_4_M \
0x18000000 // This is [5:4] bits of
// TOP_PM_REG0
#define GPRCM_REF_RTRIM_CONTROL_TOP_PM_REG0_5_4_S 27
#define GPRCM_REF_RTRIM_CONTROL_TOP_CLKM_REG0_15_5_M \
0x07FF0000 // This is [15:5] bits of
// TOP_CLKM_REG0
#define GPRCM_REF_RTRIM_CONTROL_TOP_CLKM_REG0_15_5_S 16
#define GPRCM_REF_RTRIM_CONTROL_REF_CLKM_RTRIM_OVERRIDE_CTRL \
0x00000100 // 1 - CLKM_RTRIM comes for
// bits[4:0] of this register. 0 -
// CLKM_RTRIM comes from Efuse
// (after efuse_done = 1).
#define GPRCM_REF_RTRIM_CONTROL_REF_CLKM_RTRIM_M \
0x0000001F // CLKM_TRIM Override. Applicable
// when efuse_done = 0 or bit[8] is
// set to 1.
#define GPRCM_REF_RTRIM_CONTROL_REF_CLKM_RTRIM_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_SLICER_CONTROLS0 register.
//
//******************************************************************************
#define GPRCM_REF_SLICER_CONTROLS0_CLK_EN_WLAN_LOWV_OVERRIDE_CTRL \
0x00200000 // 1 - EN_DIG_BUF_TOP comes from
// bit [14] of this register. 0 -
// EN_DIG_BUF_TOP comes from the
// FSM. Note : Final EN_DIG_BUF_WLAN
// reaches on TOP_CLKM_REG1_IN[14]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_CLK_EN_TOP_LOWV_OVERRIDE_CTRL \
0x00100000 // 1 - EN_DIG_BUF_TOP comes from
// bit [15] of this register. 0 -
// EN_DIG_BUF_TOP comes from the
// FSM. Note : Final EN_DIG_BUF_TOP
// reaches on TOP_CLKM_REG1_IN[15]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_EN_XTAL_OVERRIDE_CTRL \
0x00080000 // 1 - EN_XTAL comes from bit [3]
// of this register. 0 - EN_XTAL
// comes from FSM. Note : Final
// XTAL_EN reaches on
// TOP_CLKM_REG1_IN[3] of gprcm.
#define GPRCM_REF_SLICER_CONTROLS0_EN_SLI_HV_OVERRIDE_CTRL \
0x00040000 // 1 - Enable HV Slicer comes from
// bit [2] of this register. 0 -
// Enable HV Slicer comes from FSM.
// Note : Final HV_SLICER_EN reaches
// on port TOP_CLKM_REG1_IN[1] of
// gprcm.
#define GPRCM_REF_SLICER_CONTROLS0_EN_SLI_LV_OVERRIDE_CTRL \
0x00020000 // 1 - Enable LV Slicer comes from
// bit[1] of this register. 0 -
// Enable LV Slicer comes from FSM.
// Note : final LV_SLICER_EN reaches
// on port TOP_CLKM_REG1_IN[2] of
// gprcm.
#define GPRCM_REF_SLICER_CONTROLS0_EN_SLI_HV_PDN_OVERRIDE_CTRL \
0x00010000 // 1 - Enable HV Pull-down comes
// from bit[0] of this register. 0 -
// Enable HV Pull-down comes from
// FSM. Note : Final HV_PULL_DOWN
// reaches on port
// TOP_CLKM_REG1_IN[0] of gprcm.
#define GPRCM_REF_SLICER_CONTROLS0_CLK_EN_TOP_LOWV \
0x00008000 // Override for EN_DIG_BUF_TOP.
// Applicable if bit[20] is set to
// 1. Note : Final EN_DIG_BUF_TOP
// reaches on TOP_CLKM_REG1_IN[15]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_CLK_EN_WLAN_LOWV \
0x00004000 // Override for EN_DIG_BUF_WLAN.
// Applicable if bit[19] is set to
// 1. Note : Final EN_DIG_BUF_WLAN
// reaches on TOP_CLKM_REG1_IN[14]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_CLKOUT_FLIP_EN \
0x00002000 // CLKOUT Flip Enable. Reaches on
// bit[13] of TOP_CLKM_REG1_IN[13]
// port of gprcm.
#define GPRCM_REF_SLICER_CONTROLS0_EN_DIV2_WLAN_CLK \
0x00001000 // Enable divide2 in WLAN Clk-path.
// Reaches on TOP_CLKM_REG1_IN[12]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_EN_DIV3_WLAN_CLK \
0x00000800 // Enable divide3 in WLAN Clk-path.
// Reaches on TOP_CLKM_REG1_IN[11]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_EN_DIV4_WLAN_CLK \
0x00000400 // Enable divide4 in WLAN Clk-path.
// Reaches on TOP_CLKM_REG1_IN[10]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_CM_TMUX_SEL_LOWV_M \
0x000003C0 // CM Test-mux select. Reaches on
// TOP_CLMM_REG1_IN[9:6] port of
// gprcm
#define GPRCM_REF_SLICER_CONTROLS0_CM_TMUX_SEL_LOWV_S 6
#define GPRCM_REF_SLICER_CONTROLS0_SLICER_SPARE0_M \
0x00000030 // Slicer spare0 control. Reaches
// on TOP_CLKM_REG1_IN[5:4] port of
// gprcm
#define GPRCM_REF_SLICER_CONTROLS0_SLICER_SPARE0_S 4
#define GPRCM_REF_SLICER_CONTROLS0_EN_XTAL \
0x00000008 // Enable XTAL override. Reaches on
// TOP_CLKM_REG1_IN[3] port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_EN_SLICER_HV \
0x00000004 // Enable HV Slicer override.
// Reaches on TOP_CLKM_REG1_IN[1]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_EN_SLICER_LV \
0x00000002 // Enable LV Slicer override.
// Reaches on TOP_CLKM_REG1_IN[2]
// port of gprcm
#define GPRCM_REF_SLICER_CONTROLS0_EN_SLICER_HV_PDN \
0x00000001 // Enable HV Pull-down override.
// Reaches on TOP_CLKM_REG1_IN[0]
// port of gprcm
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_SLICER_CONTROLS1 register.
//
//******************************************************************************
#define GPRCM_REF_SLICER_CONTROLS1_SLICER_SPARE1_M \
0x0000FC00 // Slicer spare1. Reaches on port
// TOP_CLKM_REG2_IN[15:10] of gprcm.
#define GPRCM_REF_SLICER_CONTROLS1_SLICER_SPARE1_S 10
#define GPRCM_REF_SLICER_CONTROLS1_XOSC_TRIM_M \
0x000003F0 // XOSC Trim. Reaches on port
// TOP_CLKM_REG2_IN[9:4] of gprcm
#define GPRCM_REF_SLICER_CONTROLS1_XOSC_TRIM_S 4
#define GPRCM_REF_SLICER_CONTROLS1_SLICER_ITRIM_CHANGE_TOGGLE \
0x00000008 // Slicer ITRIM Toggle. Reaches on
// port TOP_CLKM_REG2_IN[3] of
// gprcm.
#define GPRCM_REF_SLICER_CONTROLS1_SLICER_LV_TRIM_M \
0x00000007 // LV Slicer trim. Reaches on port
// TOP_CLKM_REG2_IN[2:0] of gprcm.
#define GPRCM_REF_SLICER_CONTROLS1_SLICER_LV_TRIM_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_ANA_BGAP_CONTROLS0 register.
//
//******************************************************************************
#define GPRCM_REF_ANA_BGAP_CONTROLS0_reserved_M \
0xFF800000
#define GPRCM_REF_ANA_BGAP_CONTROLS0_reserved_S 23
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_mag_trim_override_ctrl \
0x00400000 // 1 - REF_MAG_TRIM comes from
// bit[4:0] of register
// REF_ANA_BGAP_CONTROLS1 [Addr :
// 0x0850]; 0 - REF_MAG_TRIM comes
// from efuse (After efc_done = 1).
// Note : Final REF_MAG_TRIM reaches
// on port TOP_PM_REG1[4:0] of gprcm
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_v2i_trim_override_ctrl \
0x00200000 // 1 - REF_V2I_TRIM comes from
// bit[9:6] of this register ; 0 -
// REF_V2I_TRIM comes from efuse
// (After efc_done = 1). Note :
// Final REF_V2I_TRIM reaches on
// port TOP_PM_REG0[9:6] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_temp_trim_override_ctrl \
0x00100000 // 1 - REF_TEMP_TRIM comes from
// bit[15:10] of this register ; 0 -
// REF_TEMP_TRIM comes from efuse
// (After efc_done = 1). Note :
// Final REF_TEMP_TRIM reaches on
// port TOP_PM_REG0[15:10] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_startup_en_override_ctrl \
0x00080000 // 1 - REF_STARTUP_EN comes from
// bit [3] of this register ; 0 -
// REF_STARTUP_EN comes from FSM.
// Note : Final REF_STARTUP_EN
// reaches on port TOP_PM_REG0[3] of
// gprcm
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_v2i_en_override_ctrl \
0x00040000 // 1 - REF_V2I_EN comes from bit
// [2] of this register ; 0 -
// REF_V2I_EN comes from FSM. Note :
// Final REF_V2I_EN reaches on port
// TOP_PM_REG0[2] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_fc_en_override_ctrl \
0x00020000 // 1 - REF_FC_EN comes from bit [1]
// of this register ; 0 - REF_FC_EN
// comes from FSM. Note : Final
// REF_FC_EN reaches on port
// TOP_PM_REG0[1] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_bgap_en_override_ctrl \
0x00010000 // 1 - REF_BGAP_EN comes from bit
// [0] of this register ; 0 -
// REF_BGAP_EN comes from FSM. Note
// : Final REF_BGAP_EN reaches on
// port TOP_PM_REG0[0] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_temp_trim_M \
0x0000FC00 // REF_TEMP_TRIM override.
// Applicable when bit [20] of this
// register set to 1. (or efc_done =
// 0) Note : Final REF_TEMP_TRIM
// reaches on port
// TOP_PM_REG0[15:10] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_temp_trim_S 10
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_v2i_trim_M \
0x000003C0 // REF_V2I_TRIM Override.
// Applicable when bit [21] of this
// register set to 1 . (of efc_done
// = 0) Note : Final REF_V2I_TRIM
// reaches on port TOP_PM_REG0[9:6]
// of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_v2i_trim_S 6
#define GPRCM_REF_ANA_BGAP_CONTROLS0_NU1_M \
0x00000030
#define GPRCM_REF_ANA_BGAP_CONTROLS0_NU1_S 4
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_startup_en \
0x00000008 // REF_STARTUP_EN override.
// Applicable when bit [19] of this
// register is set to 1. Note :
// Final REF_STARTUP_EN reaches on
// port TOP_PM_REG0[3] of gprcm
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_v2i_en \
0x00000004 // REF_V2I_EN override. Applicable
// when bit [21] of this register is
// set to 1. Note : Final REF_V2I_EN
// reaches on port TOP_PM_REG0[2] of
// gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_fc_en \
0x00000002 // REF_FC_EN override. Applicable
// when bit [17] of this register is
// set to 1. Note : Final REF_FC_EN
// reaches on port TOP_PM_REG0[1] of
// gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS0_mem_ref_bgap_en \
0x00000001 // REF_BGAP_EN override. Applicable
// when bit [16] of this register
// set to 1. Note : Final
// REF_BGAP_EN reaches on port
// TOP_PM_REG0[0] of gprcm.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_ANA_BGAP_CONTROLS1 register.
//
//******************************************************************************
#define GPRCM_REF_ANA_BGAP_CONTROLS1_reserved_M \
0xFFFF0000
#define GPRCM_REF_ANA_BGAP_CONTROLS1_reserved_S 16
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_bg_spare_M \
0x0000C000 // REF_BGAP_SPARE. Reaches on port
// TOP_PM_REG1[15:14] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_bg_spare_S 14
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_bgap_tmux_ctrl_M \
0x00003E00 // REF_BGAP_TMUX_CTRL. Reaches on
// port TOP_PM_REG1[13:9] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_bgap_tmux_ctrl_S 9
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_filt_trim_M \
0x000001E0 // REF_FILT_TRIM. Reaches on port
// TOP_PM_REG1[8:5] of gprcm.
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_filt_trim_S 5
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_mag_trim_M \
0x0000001F // REF_MAG_TRIM Override.
// Applicable when bit[22] of
// REF_ANA_BGAP_CONTROLS0 [0x084C]
// set to 1 (of efc_done = 0). Note
// : Final REF_MAG_TRIM reaches on
// port TOP_PM_REG1[4:0] of gprcm
#define GPRCM_REF_ANA_BGAP_CONTROLS1_mem_ref_mag_trim_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_ANA_SPARE_CONTROLS0 register.
//
//******************************************************************************
#define GPRCM_REF_ANA_SPARE_CONTROLS0_reserved_M \
0xFFFF0000
#define GPRCM_REF_ANA_SPARE_CONTROLS0_reserved_S 16
#define GPRCM_REF_ANA_SPARE_CONTROLS0_mem_top_pm_reg3_M \
0x0000FFFF // Spare control. Reaches on
// TOP_PM_REG3 [15:0] of gprcm.
#define GPRCM_REF_ANA_SPARE_CONTROLS0_mem_top_pm_reg3_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_ANA_SPARE_CONTROLS1 register.
//
//******************************************************************************
#define GPRCM_REF_ANA_SPARE_CONTROLS1_mem_top_clkm_reg3_M \
0xFFFF0000 // Spare control. Reaches on
// TOP_CLKM_REG3 [15:0] of gprcm.
#define GPRCM_REF_ANA_SPARE_CONTROLS1_mem_top_clkm_reg3_S 16
#define GPRCM_REF_ANA_SPARE_CONTROLS1_mem_top_clkm_reg4_M \
0x0000FFFF // Spare control. Reaches on
// TOP_CLKM_REG4 [15:0] of gprcm.
#define GPRCM_REF_ANA_SPARE_CONTROLS1_mem_top_clkm_reg4_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEMSS_PSCON_OVERRIDES0 register.
//
//******************************************************************************
#define GPRCM_MEMSS_PSCON_OVERRIDES0_mem_memss_pscon_mem_off_override_M \
0xFFFF0000
#define GPRCM_MEMSS_PSCON_OVERRIDES0_mem_memss_pscon_mem_off_override_S 16
#define GPRCM_MEMSS_PSCON_OVERRIDES0_mem_memss_pscon_mem_retain_override_M \
0x0000FFFF
#define GPRCM_MEMSS_PSCON_OVERRIDES0_mem_memss_pscon_mem_retain_override_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEMSS_PSCON_OVERRIDES1 register.
//
//******************************************************************************
#define GPRCM_MEMSS_PSCON_OVERRIDES1_reserved_M \
0xFFFFFFC0
#define GPRCM_MEMSS_PSCON_OVERRIDES1_reserved_S 6
#define GPRCM_MEMSS_PSCON_OVERRIDES1_mem_memss_pscon_mem_update_override_ctrl \
0x00000020
#define GPRCM_MEMSS_PSCON_OVERRIDES1_mem_memss_pscon_mem_update_override \
0x00000010
#define GPRCM_MEMSS_PSCON_OVERRIDES1_mem_memss_pscon_sleep_override_ctrl \
0x00000008
#define GPRCM_MEMSS_PSCON_OVERRIDES1_mem_memss_pscon_sleep_override \
0x00000004
#define GPRCM_MEMSS_PSCON_OVERRIDES1_mem_memss_pscon_mem_off_override_ctrl \
0x00000002
#define GPRCM_MEMSS_PSCON_OVERRIDES1_mem_memms_pscon_mem_retain_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_PLL_REF_LOCK_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_PLL_REF_LOCK_OVERRIDES_reserved_M \
0xFFFFFFF8
#define GPRCM_PLL_REF_LOCK_OVERRIDES_reserved_S 3
#define GPRCM_PLL_REF_LOCK_OVERRIDES_mem_mcu_apllmcs_lock_override \
0x00000004
#define GPRCM_PLL_REF_LOCK_OVERRIDES_mem_wlan_apllmcs_lock_override \
0x00000002
#define GPRCM_PLL_REF_LOCK_OVERRIDES_mem_ref_clk_valid_override \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCU_PSCON_DEBUG register.
//
//******************************************************************************
#define GPRCM_MCU_PSCON_DEBUG_reserved_M \
0xFFFFFFC0
#define GPRCM_MCU_PSCON_DEBUG_reserved_S 6
#define GPRCM_MCU_PSCON_DEBUG_mcu_pscon_rtc_ps_M \
0x00000038 // MCU_PSCON_RTC_ON = "0000";
// MCU_PSCON_RTC_OFF = "0001";
// MCU_PSCON_RTC_RET = "0010";
// MCU_PSCON_RTC_OFF_TO_ON = "0011";
// MCU_PSCON_RTC_RET_TO_ON = "0100";
// MCU_PSCON_RTC_ON_TO_RET = "0101";
// MCU_PSCON_RTC_ON_TO_OFF = "0110";
// MCU_PSCON_RTC_RET_TO_ON_WAIT_OPP
// = "0111";
// MCU_PSCON_RTC_OFF_TO_ON_WAIT_OPP
// = "1000";
#define GPRCM_MCU_PSCON_DEBUG_mcu_pscon_rtc_ps_S 3
#define GPRCM_MCU_PSCON_DEBUG_mcu_pscon_sys_ps_M \
0x00000007
#define GPRCM_MCU_PSCON_DEBUG_mcu_pscon_sys_ps_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEMSS_PWR_PS register.
//
//******************************************************************************
#define GPRCM_MEMSS_PWR_PS_reserved_M \
0xFFFFFFF8
#define GPRCM_MEMSS_PWR_PS_reserved_S 3
#define GPRCM_MEMSS_PWR_PS_pwr_ps_memss_M \
0x00000007 // MEMSS_PM_SLEEP = "000";
// MEMSS_PM_WAIT_OPP = "010";
// MEMSS_PM_ACTIVE = "011";
// MEMSS_PM_SLEEP_TO_ACTIVE = "100";
// MEMSS_PM_ACTIVE_TO_SLEEP = "101";
#define GPRCM_MEMSS_PWR_PS_pwr_ps_memss_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_REF_FSM_DEBUG register.
//
//******************************************************************************
#define GPRCM_REF_FSM_DEBUG_reserved_M \
0xFFFFFFC0
#define GPRCM_REF_FSM_DEBUG_reserved_S 6
#define GPRCM_REF_FSM_DEBUG_fref_mode_M \
0x00000030 // 01 - HV Mode ; 10 - LV Mode ; 11
// - XTAL Mode
#define GPRCM_REF_FSM_DEBUG_fref_mode_S 4
#define GPRCM_REF_FSM_DEBUG_ref_fsm_ps_M \
0x0000000F // constant FREF_CLK_OFF = "00000";
// constant FREF_EN_BGAP = "00001";
// constant FREF_EN_LDO = "00010";
// constant FREF_EN_SLI_HV =
// "00011"; constant
// FREF_EN_SLI_HV_PD = "00100";
// constant FREF_EN_DIG_BUF =
// "00101"; constant FREF_EN_OSC =
// "00110"; constant FREF_EN_SLI_LV
// = "00111"; constant
// FREF_EN_CLK_REQ = "01000";
// constant FREF_CLK_VALID =
// "01001"; constant FREF_MODE_DET0
// = "01010"; constant
// FREF_MODE_DET1 = "01011";
// constant FREF_MODE_DET2 =
// "10010"; constant FREF_MODE_DET3
// = "10011"; constant FREF_VALID =
// "01100"; constant FREF_VALID0 =
// "01101"; constant FREF_VALID1 =
// "01110"; constant FREF_VALID2 =
// "01111"; constant
// FREF_WAIT_EXT_TCXO0 = "10000";
// constant FREF_WAIT_EXT_TCXO1 =
// "10001";
#define GPRCM_REF_FSM_DEBUG_ref_fsm_ps_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_SYS_OPP_REQ_OVERRIDE register.
//
//******************************************************************************
#define GPRCM_MEM_SYS_OPP_REQ_OVERRIDE_reserved_M \
0xFFFFFFE0
#define GPRCM_MEM_SYS_OPP_REQ_OVERRIDE_reserved_S 5
#define GPRCM_MEM_SYS_OPP_REQ_OVERRIDE_mem_sys_opp_req_override_ctrl \
0x00000010 // 1 - Override the sytem-opp
// request to ANATOP using bit0 of
// this register
#define GPRCM_MEM_SYS_OPP_REQ_OVERRIDE_mem_sys_opp_req_override_M \
0x0000000F // "0001" - RUN ; "0010" - DSLP ;
// "0100" - LPDS ; Others - NA
#define GPRCM_MEM_SYS_OPP_REQ_OVERRIDE_mem_sys_opp_req_override_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_TESTCTRL_PD_OPP_CONFIG register.
//
//******************************************************************************
#define GPRCM_MEM_TESTCTRL_PD_OPP_CONFIG_reserved_M \
0xFFFFFFFE
#define GPRCM_MEM_TESTCTRL_PD_OPP_CONFIG_reserved_S 1
#define GPRCM_MEM_TESTCTRL_PD_OPP_CONFIG_mem_sleep_opp_enter_with_testpd_on \
0x00000001 // 1 - Enable sleep-opp (DSLP/LPDS)
// entry even if Test-Pd is kept ON
// ; 0 - Donot enable sleep-opp
// (DSLP/LPDS) entry with Test-Pd
// ON.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_WL_FAST_CLK_REQ_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_MEM_WL_FAST_CLK_REQ_OVERRIDES_reserved_M \
0xFFFFFFF8
#define GPRCM_MEM_WL_FAST_CLK_REQ_OVERRIDES_reserved_S 3
#define GPRCM_MEM_WL_FAST_CLK_REQ_OVERRIDES_mem_wl_fast_clk_req_override_ctrl \
0x00000004 // NA
#define GPRCM_MEM_WL_FAST_CLK_REQ_OVERRIDES_mem_wl_fast_clk_req_override \
0x00000002 // NA
#define GPRCM_MEM_WL_FAST_CLK_REQ_OVERRIDES_mem_wl_sleep_with_clk_req_override \
0x00000001 // NA
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_MCU_PD_MODE_REQ_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_MEM_MCU_PD_MODE_REQ_OVERRIDES_mem_mcu_pd_mode_req_override_ctrl \
0x00000004 // 1 - Override the MCU-PD power
// modes using bits [1] & [0] ;
#define GPRCM_MEM_MCU_PD_MODE_REQ_OVERRIDES_mem_mcu_pd_pwrdn_req_override \
0x00000002 // 1 - Request for power-down of
// MCU-PD ;
#define GPRCM_MEM_MCU_PD_MODE_REQ_OVERRIDES_mem_mcu_pd_ret_req_override \
0x00000001 // 1 - Request for retention mode
// of MCU-PD.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_MCSPI_SRAM_OFF_REQ_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_MEM_MCSPI_SRAM_OFF_REQ_OVERRIDES_mem_mcspi_sram_off_req_override_ctrl \
0x00000002 // 1- Override the MCSPI
// (Autonomous SPI) memory state
// using bit [0]
#define GPRCM_MEM_MCSPI_SRAM_OFF_REQ_OVERRIDES_mem_mcspi_sram_off_req_override \
0x00000001 // 1 - Request for power-down of
// Autonomous SPI 8k memory ; 0 -
// Donot request power-down of
// Autonomous SPI 8k Memory
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_WLAN_APLLMCS_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_MEM_WLAN_APLLMCS_OVERRIDES_wlan_apllmcs_lock \
0x00000100
#define GPRCM_MEM_WLAN_APLLMCS_OVERRIDES_mem_wlan_apllmcs_enable_override \
0x00000002
#define GPRCM_MEM_WLAN_APLLMCS_OVERRIDES_mem_wlan_apllmcs_enable_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_REF_FSM_CFG2 register.
//
//******************************************************************************
#define GPRCM_MEM_REF_FSM_CFG2_MEM_FC_DEASSERT_DELAY_M \
0x00380000 // Number of RTC clocks for keeping
// the FC_EN asserted high
#define GPRCM_MEM_REF_FSM_CFG2_MEM_FC_DEASSERT_DELAY_S 19
#define GPRCM_MEM_REF_FSM_CFG2_MEM_STARTUP_DEASSERT_DELAY_M \
0x00070000 // Number of RTC clocks for keeping
// the STARTUP_EN asserted high
#define GPRCM_MEM_REF_FSM_CFG2_MEM_STARTUP_DEASSERT_DELAY_S 16
#define GPRCM_MEM_REF_FSM_CFG2_MEM_EXT_TCXO_SETTLING_TIME_M \
0x0000FFFF // Number of RTC clocks for waiting
// for clock to settle.
#define GPRCM_MEM_REF_FSM_CFG2_MEM_EXT_TCXO_SETTLING_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_TESTCTRL_POWER_CTRL register.
//
//******************************************************************************
#define GPRCM_TESTCTRL_POWER_CTRL_TESTCTRL_PD_STATUS_M \
0x00000006
#define GPRCM_TESTCTRL_POWER_CTRL_TESTCTRL_PD_STATUS_S 1
#define GPRCM_TESTCTRL_POWER_CTRL_TESTCTRL_PD_ENABLE \
0x00000001 // 0 - Disable the TestCtrl-pd ; 1
// - Enable the TestCtrl-pd.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_SSDIO_POWER_CTRL register.
//
//******************************************************************************
#define GPRCM_SSDIO_POWER_CTRL_SSDIO_PD_STATUS_M \
0x00000006 // 1 - SSDIO-PD is ON ; 0 -
// SSDIO-PD is OFF
#define GPRCM_SSDIO_POWER_CTRL_SSDIO_PD_STATUS_S 1
#define GPRCM_SSDIO_POWER_CTRL_SSDIO_PD_ENABLE \
0x00000001 // 0 - Disable the SSDIO-pd ; 1 -
// Enable the SSDIO-pd.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCSPI_N1_POWER_CTRL register.
//
//******************************************************************************
#define GPRCM_MCSPI_N1_POWER_CTRL_MCSPI_N1_PD_STATUS_M \
0x00000006 // 1 - MCSPI_N1-PD is ON ; 0 -
// MCSPI_N1-PD if OFF
#define GPRCM_MCSPI_N1_POWER_CTRL_MCSPI_N1_PD_STATUS_S 1
#define GPRCM_MCSPI_N1_POWER_CTRL_MCSPI_N1_PD_ENABLE \
0x00000001 // 0 - Disable the MCSPI_N1-pd ; 1
// - Enable the MCSPI_N1-pd.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WELP_POWER_CTRL register.
//
//******************************************************************************
#define GPRCM_WELP_POWER_CTRL_WTOP_PD_STATUS_M \
0x00001C00
#define GPRCM_WELP_POWER_CTRL_WTOP_PD_STATUS_S 10
#define GPRCM_WELP_POWER_CTRL_WTOP_PD_REQ_OVERRIDE \
0x00000200
#define GPRCM_WELP_POWER_CTRL_WTOP_PD_REQ_OVERRIDE_CTRL \
0x00000100
#define GPRCM_WELP_POWER_CTRL_WELP_PD_STATUS_M \
0x00000006
#define GPRCM_WELP_POWER_CTRL_WELP_PD_STATUS_S 1
#define GPRCM_WELP_POWER_CTRL_WELP_PD_ENABLE \
0x00000001 // 0 - Disable the WELP-pd ; 1 -
// Enable the WELP-pd.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WL_SDIO_POWER_CTRL register.
//
//******************************************************************************
#define GPRCM_WL_SDIO_POWER_CTRL_WL_SDIO_PD_STATUS_M \
0x00000006
#define GPRCM_WL_SDIO_POWER_CTRL_WL_SDIO_PD_STATUS_S 1
#define GPRCM_WL_SDIO_POWER_CTRL_WL_SDIO_PD_ENABLE \
0x00000001 // 0 - Disable the WL_SDIO-pd ; 1 -
// Enable the WL_SDIO-pd.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WLAN_SRAM_ACTIVE_PWR_CFG register.
//
//******************************************************************************
#define GPRCM_WLAN_SRAM_ACTIVE_PWR_CFG_WLAN_SRAM_ACTIVE_PWR_CFG_M \
0x00FFFFFF // SRAM (WTOP+DRP) state during
// Active-mode : 1 - SRAMs are ON ;
// 0 - SRAMs are OFF. Cluster
// information : [0] - 1st column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) [1] - 2nd column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) ; [2] - 3rd column
// of MEMSS (Applicable only when
// owned by WTOP/PHY) ; [3] - 4th
// column of MEMSS (Applicable only
// when owned by WTOP/PHY) ; [4] -
// 5th column of MEMSS (Applicable
// only when owned by WTOP/PHY) ;
// [5] - 6th column of MEMSS
// (Applicable only when owned by
// WTOP/PHY) ; [6] - 7th column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) ; [7] - 8th column
// of MEMSS (Applicable only when
// owned by WTOP/PHY) ; [8] - 9th
// column of MEMSS (Applicable only
// when owned by WTOP/PHY) ; [9] -
// 10th column of MEMSS (Applicable
// only when owned by WTOP/PHY) ;
// [10] - 11th column of MEMSS
// (Applicable only when owned by
// WTOP/PHY) ; [11] - 12th column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) ; [12] - 13th column
// of MEMSS (Applicable only when
// owned by WTOP/PHY) ; [13] - 14th
// column of MEMSS (Applicable only
// when owned by WTOP/PHY) ; [14] -
// 15th column of MEMSS (Applicable
// only when owned by WTOP/PHY) ;
// [15] - 16th column of MEMSS
// (Applicable only when owned by
// WTOP/PHY) ; [23:16] - Internal to
// WTOP Cluster
#define GPRCM_WLAN_SRAM_ACTIVE_PWR_CFG_WLAN_SRAM_ACTIVE_PWR_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WLAN_SRAM_SLEEP_PWR_CFG register.
//
//******************************************************************************
#define GPRCM_WLAN_SRAM_SLEEP_PWR_CFG_WLAN_SRAM_SLEEP_PWR_CFG_M \
0x00FFFFFF // SRAM (WTOP+DRP) state during
// Sleep-mode : 1 - SRAMs are RET ;
// 0 - SRAMs are OFF. Cluster
// information : [0] - 1st column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) [1] - 2nd column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) ; [2] - 3rd column
// of MEMSS (Applicable only when
// owned by WTOP/PHY) ; [3] - 4th
// column of MEMSS (Applicable only
// when owned by WTOP/PHY) ; [4] -
// 5th column of MEMSS (Applicable
// only when owned by WTOP/PHY) ;
// [5] - 6th column of MEMSS
// (Applicable only when owned by
// WTOP/PHY) ; [6] - 7th column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) ; [7] - 8th column
// of MEMSS (Applicable only when
// owned by WTOP/PHY) ; [8] - 9th
// column of MEMSS (Applicable only
// when owned by WTOP/PHY) ; [9] -
// 10th column of MEMSS (Applicable
// only when owned by WTOP/PHY) ;
// [10] - 11th column of MEMSS
// (Applicable only when owned by
// WTOP/PHY) ; [11] - 12th column of
// MEMSS (Applicable only when owned
// by WTOP/PHY) ; [12] - 13th column
// of MEMSS (Applicable only when
// owned by WTOP/PHY) ; [13] - 14th
// column of MEMSS (Applicable only
// when owned by WTOP/PHY) ; [14] -
// 15th column of MEMSS (Applicable
// only when owned by WTOP/PHY) ;
// [15] - 16th column of MEMSS
// (Applicable only when owned by
// WTOP/PHY) ; [23:16] - Internal to
// WTOP Cluster
#define GPRCM_WLAN_SRAM_SLEEP_PWR_CFG_WLAN_SRAM_SLEEP_PWR_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_SECURE_INIT_DONE register.
//
//******************************************************************************
#define GPRCM_APPS_SECURE_INIT_DONE_SECURE_INIT_DONE_STATUS \
0x00000002 // 1-Secure mode init is done ;
// 0-Secure mode init is not done
#define GPRCM_APPS_SECURE_INIT_DONE_APPS_SECURE_INIT_DONE \
0x00000001 // Must be programmed 1 in order to
// say that secure-mode device init
// is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_DEV_MODE_INIT_DONE register.
//
//******************************************************************************
#define GPRCM_APPS_DEV_MODE_INIT_DONE_APPS_DEV_MODE_INIT_DONE \
0x00000001 // 1 - Patch download and other
// initializations are done (before
// removing APPS resetn) for
// development mode (#3) . 0 -
// Development mode (#3) init is not
// done yet
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_EN_APPS_REBOOT register.
//
//******************************************************************************
#define GPRCM_EN_APPS_REBOOT_EN_APPS_REBOOT \
0x00000001 // 1 - When 1, disable the reboot
// of APPS after DevInit is
// completed. In this case, APPS
// will permanantly help in reset. 0
// - When 0, enable the reboot of
// APPS after DevInit is completed.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_APPS_PERIPH_PRESENT register.
//
//******************************************************************************
#define GPRCM_MEM_APPS_PERIPH_PRESENT_WLAN_GEM_PP \
0x00010000 // 1 - Enable ; 0 - Disable
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_AES_PP \
0x00008000
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_DES_PP \
0x00004000
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_SHA_PP \
0x00002000
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_CAMERA_PP \
0x00001000
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_MMCHS_PP \
0x00000800
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_MCASP_PP \
0x00000400
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_MCSPI_A1_PP \
0x00000200
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_MCSPI_A2_PP \
0x00000100
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_UDMA_PP \
0x00000080
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_WDOG_PP \
0x00000040
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_UART_A0_PP \
0x00000020
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_UART_A1_PP \
0x00000010
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_GPT_A0_PP \
0x00000008
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_GPT_A1_PP \
0x00000004
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_GPT_A2_PP \
0x00000002
#define GPRCM_MEM_APPS_PERIPH_PRESENT_APPS_GPT_A3_PP \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_NWP_PERIPH_PRESENT register.
//
//******************************************************************************
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_ASYNC_BRIDGE_PP \
0x00000200
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_MCSPI_N2_PP \
0x00000100
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_GPT_N0_PP \
0x00000080
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_GPT_N1_PP \
0x00000040
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_WDOG_PP \
0x00000020
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_UDMA_PP \
0x00000010
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_UART_N0_PP \
0x00000008
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_UART_N1_PP \
0x00000004
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_SSDIO_PP \
0x00000002
#define GPRCM_MEM_NWP_PERIPH_PRESENT_NWP_MCSPI_N1_PP \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MEM_SHARED_PERIPH_PRESENT register.
//
//******************************************************************************
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_MCSPI_PP \
0x00000040
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_I2C_PP \
0x00000020
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_GPIO_A_PP \
0x00000010
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_GPIO_B_PP \
0x00000008
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_GPIO_C_PP \
0x00000004
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_GPIO_D_PP \
0x00000002
#define GPRCM_MEM_SHARED_PERIPH_PRESENT_SHARED_GPIO_E_PP \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_PWR_STATE register.
//
//******************************************************************************
#define GPRCM_NWP_PWR_STATE_NWP_PWR_STATE_PS_M \
0x00000F00 // "0000"- PORZ :- NWP is yet to be
// enabled by APPS during powerup
// (from HIB/OFF) ; "0011"- ACTIVE
// :- NWP is enabled, clocks and
// resets to NWP-SubSystem are
// enabled ; "0010"- LPDS :- NWP is
// in LPDS-mode ; Clocks and reset
// to NWP-SubSystem are gated ;
// "0101"- WAIT_FOR_OPP :- NWP is in
// transition from LPDS to ACTIVE,
// where it is waiting for OPP to be
// stable ; "1000"-
// WAKE_TIMER_OPP_REQ :- NWP is in
// transition from LPDS, where the
// wakeup cause is LPDS_Wake timer
// OTHERS : NA
#define GPRCM_NWP_PWR_STATE_NWP_PWR_STATE_PS_S 8
#define GPRCM_NWP_PWR_STATE_NWP_RCM_PS_M \
0x00000007 // "000" - NWP_RUN : NWP is in RUN
// state (default) - Applicable only
// when NWP_PWR_STATE_PS = ACTIVE ;
// "001" - NWP_SLP : NWP is in SLEEP
// state (default) - Applicable only
// when NWP_PWR_STATE_PS = ACTIVE ;
// "010" - NWP_DSLP : NWP is in
// Deep-Sleep state (default) -
// Applicable only when
// NWP_PWR_STATE_PS = ACTIVE ; "011"
// - WAIT_FOR_ACTIVE : NWP is in
// transition from Deep-sleep to
// Run, where it is waiting for OPP
// to be stable ; "100" -
// WAIT_FOR_DSLP_TIMER_WAKE_REQ :
// NWP is in transition from
// Deep-sleep to Run, where the
// wakeup cause is deep-sleep
// wake-timer
#define GPRCM_NWP_PWR_STATE_NWP_RCM_PS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_PWR_STATE register.
//
//******************************************************************************
#define GPRCM_APPS_PWR_STATE_APPS_PWR_STATE_PS_M \
0x00000F00 // "0000"- PORZ :- APPS is waiting
// for PLL_clock during powerup
// (from HIB/OFF) ; "0011"- ACTIVE
// :- APPS is enabled, clocks and
// resets to APPS-SubSystem are
// enabled ; APPS might be either in
// Secure or Un-secure mode during
// this state. "1001" -
// SECURE_MODE_LPDS :- While in
// ACTIVE (Secure-mode), APPS had to
// program the DevInit_done bit at
// the end, after which it enters
// into this state, where the reset
// to APPS will be asserted. From
// this state APPS might either
// re-boot itself or enter into LPDS
// depending upon whether the device
// is 3200 or 3100. "0010"- LPDS :-
// APPS is in LPDS-mode ; Clocks and
// reset to APPS-SubSystem are gated
// ; "0101"- WAIT_FOR_OPP :- APPS is
// in transition from LPDS to
// ACTIVE, where it is waiting for
// OPP to be stable ; "1000" -
// WAKE_TIMER_OPP_REQ : APPS is in
// transition from LPDS, where the
// wakeup cause is LPDS_Wake timer ;
// "1010" - WAIT_FOR_PATCH_INIT :
// APPS enters into this state
// during development-mode #3 (SOP =
// 3), where it is waiting for patch
// download to complete and 0x4 hack
// is programmed. OTHERS : NA
#define GPRCM_APPS_PWR_STATE_APPS_PWR_STATE_PS_S 8
#define GPRCM_APPS_PWR_STATE_APPS_RCM_PS_M \
0x00000007 // "000" - APPS_RUN : APPS is in
// RUN state (default) - Applicable
// only when APPS_PWR_STATE_PS =
// ACTIVE ; "001" - APPS_SLP : APPS
// is in SLEEP state (default) -
// Applicable only when
// APPS_PWR_STATE_PS = ACTIVE ;
// "010" - APPS_DSLP : APPS is in
// Deep-Sleep state (default) -
// Applicable only when
// APPS_PWR_STATE_PS = ACTIVE ;
// "011" - WAIT_FOR_ACTIVE : APPS is
// in transition from Deep-sleep to
// Run, where it is waiting for OPP
// to be stable ; "100" -
// WAIT_FOR_DSLP_TIMER_WAKE_REQ :
// APPS is in transition from
// Deep-sleep to Run, where the
// wakeup cause is deep-sleep
// wake-timer
#define GPRCM_APPS_PWR_STATE_APPS_RCM_PS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCU_PWR_STATE register.
//
//******************************************************************************
#define GPRCM_MCU_PWR_STATE_MCU_OPP_PS_M \
0x0000001F // TBD
#define GPRCM_MCU_PWR_STATE_MCU_OPP_PS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WTOP_PM_PS register.
//
//******************************************************************************
#define GPRCM_WTOP_PM_PS_WTOP_PM_PS_M \
0x00000007 // "011" - WTOP_PM_ACTIVE (Default)
// :- WTOP_Pd is in ACTIVE mode;
// "100" - WTOP_PM_ACTIVE_TO_SLEEP
// :- WTOP_Pd is in transition from
// ACTIVE to SLEEP ; "000" -
// WTOP_PM_SLEEP : WTOP-Pd is in
// Sleep-state ; "100" -
// WTOP_PM_SLEEP_TO_ACTIVE : WTOP_Pd
// is in transition from SLEEP to
// ACTIVE ; "000" -
// WTOP_PM_WAIT_FOR_OPP : Wait for
// OPP to be stable ;
#define GPRCM_WTOP_PM_PS_WTOP_PM_PS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WTOP_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_WTOP_PD_RESETZ_OVERRIDE_REG_WTOP_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for WTOP PD
// Resetz. When set to 1,
// WTOP_Resetz will be controlled by
// bit [0]
#define GPRCM_WTOP_PD_RESETZ_OVERRIDE_REG_WTOP_PD_RESETZ_OVERRIDE \
0x00000001 // Override for WTOP PD Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WELP_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_WELP_PD_RESETZ_OVERRIDE_REG_WELP_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for WELP PD
// Resetz. When set to 1,
// WELP_Resetz will be controlled by
// bit [0]
#define GPRCM_WELP_PD_RESETZ_OVERRIDE_REG_WELP_PD_RESETZ_OVERRIDE \
0x00000001 // Override for WELP PD Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WL_SDIO_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_WL_SDIO_PD_RESETZ_OVERRIDE_REG_WL_SDIO_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for WL_SDIO
// Resetz. When set to 1,
// WL_SDIO_Resetz will be controlled
// by bit [0]
#define GPRCM_WL_SDIO_PD_RESETZ_OVERRIDE_REG_WL_SDIO_PD_RESETZ_OVERRIDE \
0x00000001 // Override for WL_SDIO Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_SSDIO_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_SSDIO_PD_RESETZ_OVERRIDE_REG_SSDIO_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for SSDIO
// Resetz. When set to 1,
// SSDIO_Resetz will be controlled
// by bit [0]
#define GPRCM_SSDIO_PD_RESETZ_OVERRIDE_REG_SSDIO_PD_RESETZ_OVERRIDE \
0x00000001 // Override for SSDIO Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCSPI_N1_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_MCSPI_N1_PD_RESETZ_OVERRIDE_REG_MCSPI_N1_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for MCSPI_N1
// Resetz. When set to 1,
// MCSPI_N1_Resetz will be
// controlled by bit [0]
#define GPRCM_MCSPI_N1_PD_RESETZ_OVERRIDE_REG_MCSPI_N1_PD_RESETZ_OVERRIDE \
0x00000001 // Override for MCSPI_N1 Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_TESTCTRL_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_TESTCTRL_PD_RESETZ_OVERRIDE_REG_TESTCTRL_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for TESTCTRL-PD
// Resetz. When set to 1,
// TESTCTRL_Resetz will be
// controlled by bit [0]
#define GPRCM_TESTCTRL_PD_RESETZ_OVERRIDE_REG_TESTCTRL_PD_RESETZ_OVERRIDE \
0x00000001 // Override for TESTCTRL Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCU_PD_RESETZ_OVERRIDE_REG register.
//
//******************************************************************************
#define GPRCM_MCU_PD_RESETZ_OVERRIDE_REG_MCU_PD_RESETZ_OVERRIDE_CTRL \
0x00000100 // Override control for MCU-PD
// Resetz. When set to 1, MCU_Resetz
// will be controlled by bit [0]
#define GPRCM_MCU_PD_RESETZ_OVERRIDE_REG_MCU_PD_RESETZ_OVERRIDE \
0x00000001 // Override for MCU Resetz.
// Applicable only when bit[8] is
// set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG0 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG0_FUSEFARM_ROW_14_M \
0xFFFFFFFF // This is ROW_14 [31:0] of
// FUSEFARM. [0:0] : XTAL_IS_26MHZ
// [5:1] : TOP_CLKM_RTRIM[4:0]
// [10:6] : ANA_BGAP_MAG_TRIM[4:0]
// [16:11] : ANA_BGAP_TEMP_TRIM[5:0]
// [20:17] : ANA_BGAP_V2I_TRIM[3:0]
// [25:22] : PROCESS INDICATOR
// [26:26] : Reserved [31:27] :
// FUSEROM Version
#define GPRCM_GPRCM_EFUSE_READ_REG0_FUSEFARM_ROW_14_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG1 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG1_FUSEFARM_ROW_15_LSW_M \
0x0000FFFF // This is ROW_15[15:0] of FUSEFARM
// 1. NWP Peripheral Present bits
// [15:8] NWP_GPT_N0_PP [15:15]
// NWP_GPT_N1_PP [14:14] NWP_WDOG_PP
// [13:13] NWP_UDMA_PP [12:12]
// NWP_UART_N0_PP [11:11]
// NWP_UART_N1_PP [10:10]
// NWP_SSDIO_PP [9:9]
// NWP_MCSPI_N1_PP [8:8] 2. Shared
// Peripheral Present bits [7:0]
// SHARED SPI PP [6:6]
// SHARED I2C PP [5:5] SHARED
// GPIO-A PP [4:4] SHARED GPIO-B PP
// [3:3] SHARED GPIO-C PP [2:2]
// SHARED GPIO-D PP [1:1] SHARED
// GPIO-E PP [0:0]
#define GPRCM_GPRCM_EFUSE_READ_REG1_FUSEFARM_ROW_15_LSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG2 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG2_FUSEFARM_ROW_16_LSW_ROW_15_MSW_M \
0xFFFFFFFF // This is ROW_16[15:0] &
// ROW_15[31:16] of FUSEFARM.
// [31:21] - Reserved [20:16] -
// CHIP_ID [15:15] - SSBD SOP
// Control [14:14] - SSBD TAP
// Control [13:2] - APPS Peripheral
// Present bits : APPS_CAMERA_PP
// [13:13] APPS_MMCHS_PP [12:12]
// APPS_MCASP_PP [11:11]
// APPS_MCSPI_A1_PP [10:10]
// APPS_MCSPI_A2_PP [9:9]
// APPS_UDMA_PP [8:8] APPS_WDOG_PP
// [7:7] APPS_UART_A0_PP [6:6]
// APPS_UART_A1_PP [5:5]
// APPS_GPT_A0_PP [4:4]
// APPS_GPT_A1_PP [3:3]
// APPS_GPT_A2_PP [2:2]
// APPS_GPT_A3_PP [1:1] [0:0] - NWP
// Peripheral present bits
// NWP_ACSPI_PP [0:0]
#define GPRCM_GPRCM_EFUSE_READ_REG2_FUSEFARM_ROW_16_LSW_ROW_15_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG3 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG3_FUSEFARM_ROW_17_LSW_ROW_16_MSW_M \
0xFFFFFFFF // This is ROW_17[15:0] &
// ROW_16[31:16] of FUSEFARM :
// [31:16] - TEST_TAP_KEY(15:0)
// [15:0] - Reserved
#define GPRCM_GPRCM_EFUSE_READ_REG3_FUSEFARM_ROW_17_LSW_ROW_16_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WTOP_MEM_RET_CFG register.
//
//******************************************************************************
#define GPRCM_WTOP_MEM_RET_CFG_WTOP_MEM_RET_CFG \
0x00000001 // 1 - Soft-compile memories in
// WTOP can be turned-off during
// WTOP-sleep mode ; 0 -
// Soft-compile memories in WTOP
// must be kept on during WTOP-sleep
// mode.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_COEX_CLK_SWALLOW_CFG0 register.
//
//******************************************************************************
#define GPRCM_COEX_CLK_SWALLOW_CFG0_Q_FACTOR_M \
0x007FFFFF // TBD
#define GPRCM_COEX_CLK_SWALLOW_CFG0_Q_FACTOR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_COEX_CLK_SWALLOW_CFG1 register.
//
//******************************************************************************
#define GPRCM_COEX_CLK_SWALLOW_CFG1_P_FACTOR_M \
0x000FFFFF // TBD
#define GPRCM_COEX_CLK_SWALLOW_CFG1_P_FACTOR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_COEX_CLK_SWALLOW_CFG2 register.
//
//******************************************************************************
#define GPRCM_COEX_CLK_SWALLOW_CFG2_CONSECUTIVE_SWALLOW_M \
0x00000018
#define GPRCM_COEX_CLK_SWALLOW_CFG2_CONSECUTIVE_SWALLOW_S 3
#define GPRCM_COEX_CLK_SWALLOW_CFG2_PRBS_GAIN \
0x00000004
#define GPRCM_COEX_CLK_SWALLOW_CFG2_PRBS_ENABLE \
0x00000002
#define GPRCM_COEX_CLK_SWALLOW_CFG2_SWALLOW_ENABLE \
0x00000001 // TBD
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_COEX_CLK_SWALLOW_ENABLE register.
//
//******************************************************************************
#define GPRCM_COEX_CLK_SWALLOW_ENABLE_COEX_CLK_SWALLOW_ENABLE \
0x00000001 // 1 - Enable switching of sysclk
// to Coex-clk path ; 0 - Disable
// switching of sysclk to Coex-clk
// path.
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_DCDC_CLK_GEN_CONFIG register.
//
//******************************************************************************
#define GPRCM_DCDC_CLK_GEN_CONFIG_DCDC_CLK_ENABLE \
0x00000001 // 1 - Enable the clock for DCDC
// (PWM-mode) ; 0 - Disable the
// clock for DCDC (PWM-mode)
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG4 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG4_FUSEFARM_ROW_17_MSW_M \
0x0000FFFF // This corresponds to
// ROW_17[31:16] of the FUSEFARM :
// [15:0] : TEST_TAP_KEY(31:16)
#define GPRCM_GPRCM_EFUSE_READ_REG4_FUSEFARM_ROW_17_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG5 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG5_FUSEFARM_ROW_18_M \
0xFFFFFFFF // Corresponds to ROW_18 of
// FUSEFARM. [29:0] -
// MEMSS_COLUMN_SEL_LSW ; [30:30] -
// WLAN GEM DISABLE ; [31:31] -
// SERIAL WIRE JTAG SELECT
#define GPRCM_GPRCM_EFUSE_READ_REG5_FUSEFARM_ROW_18_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG6 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG6_FUSEFARM_ROW_19_LSW_M \
0x0000FFFF // Corresponds to ROW_19[15:0] of
// FUSEFARM. [15:0] :
// MEMSS_COLUMN_SEL_MSW
#define GPRCM_GPRCM_EFUSE_READ_REG6_FUSEFARM_ROW_19_LSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG7 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG7_FUSEFARM_ROW_20_LSW_ROW_19_MSW_M \
0xFFFFFFFF // Corresponds to ROW_20[15:0] &
// ROW_19[31:16] of FUSEFARM.
// FLASH_REGION0
#define GPRCM_GPRCM_EFUSE_READ_REG7_FUSEFARM_ROW_20_LSW_ROW_19_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG8 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG8_FUSEFARM_ROW_21_LSW_ROW_20_MSW_M \
0xFFFFFFFF // Corresponds to ROW_21[15:0] &
// ROW_20[31:16] of FUSEFARM.
// FLASH_REGION1
#define GPRCM_GPRCM_EFUSE_READ_REG8_FUSEFARM_ROW_21_LSW_ROW_20_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG9 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG9_FUSEFARM_ROW_22_LSW_ROW_21_MSW_M \
0xFFFFFFFF // Corresponds to ROW_22[15:0] &
// ROW_21[31:16] of FUSEFARM.
// FLASH_REGION2
#define GPRCM_GPRCM_EFUSE_READ_REG9_FUSEFARM_ROW_22_LSW_ROW_21_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG10 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG10_FUSEFARM_ROW_23_LSW_ROW_22_MSW_M \
0xFFFFFFFF // Corresponds to ROW_23[15:0] &
// ROW_22[31:16] of FUSEFARM.
// FLASH_REGION3
#define GPRCM_GPRCM_EFUSE_READ_REG10_FUSEFARM_ROW_23_LSW_ROW_22_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_EFUSE_READ_REG11 register.
//
//******************************************************************************
#define GPRCM_GPRCM_EFUSE_READ_REG11_FUSEFARM_ROW_24_LSW_ROW_23_MSW_M \
0xFFFFFFFF // Corresponds to ROW_24[15:0] &
// ROW_23[31:16] of FUSEFARM.
// FLASH_DESCRIPTOR
#define GPRCM_GPRCM_EFUSE_READ_REG11_FUSEFARM_ROW_24_LSW_ROW_23_MSW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG0 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG0_FUSEFARM_191_160_M \
0xFFFFFFFF // Corresponds to bits [191:160] of
// the FUSEFARM. This is ROW_5 of
// FUSEFARM [191:160] : [31:0] :
// DIE_ID0 [31:0] : DEVX [11:0] DEVY
// [23:12] DEVWAF [29:24] DEV_SPARE
// [31:30]
#define GPRCM_GPRCM_DIEID_READ_REG0_FUSEFARM_191_160_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG1 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG1_FUSEFARM_223_192_M \
0xFFFFFFFF // Corresponds to bits [223:192] of
// the FUSEFARM. This is ROW_6 of
// FUSEFARM :- DEVLOT [23:0] DEVFAB
// [28:24] DEVFABBE [31:29]
#define GPRCM_GPRCM_DIEID_READ_REG1_FUSEFARM_223_192_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG2 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG2_FUSEFARM_255_224_M \
0xFFFFFFFF // Corresponds to bits [255:224] of
// the FUSEFARM. This is ROW_7 of
// FUSEFARM:- DEVDESREV[4:0]
// Memrepair[5:5] MakeDefined[16:6]
// CHECKSUM[30:17] Reserved :
// [31:31]
#define GPRCM_GPRCM_DIEID_READ_REG2_FUSEFARM_255_224_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG3 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG3_FUSEFARM_287_256_M \
0xFFFFFFFF // Corresponds to bits [287:256] of
// the FUSEFARM. This is ROW_8 of
// FUSEFARM :- DIEID0 - DEVREG
// [31:0]
#define GPRCM_GPRCM_DIEID_READ_REG3_FUSEFARM_287_256_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_GPRCM_DIEID_READ_REG4 register.
//
//******************************************************************************
#define GPRCM_GPRCM_DIEID_READ_REG4_FUSEFARM_319_288_M \
0xFFFFFFFF // Corresponds to bits [319:288] of
// the FUSEFARM. This is ROW_9 of
// FUSEFARM :- [7:0] - VBATMON ;
// [13:8] - BUFF_OFFSET ; [15:15] -
// DFT_GXG ; [14:14] - DFT_GLX ;
// [19:16] - PHY ROM Version ;
// [23:20] - MAC ROM Version ;
// [27:24] - NWP ROM Version ;
// [31:28] - APPS ROM Version
#define GPRCM_GPRCM_DIEID_READ_REG4_FUSEFARM_319_288_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_APPS_SS_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_APPS_SS_OVERRIDES_reserved_M \
0xFFFFFC00
#define GPRCM_APPS_SS_OVERRIDES_reserved_S 10
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_refclk_gating_override \
0x00000200
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_refclk_gating_override_ctrl \
0x00000100
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_pllclk_gating_override \
0x00000080
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_pllclk_gating_override_ctrl \
0x00000040
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_por_rstn_override \
0x00000020
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_sysrstn_override \
0x00000010
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_sysclk_gating_override \
0x00000008
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_por_rstn_override_ctrl \
0x00000004
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_sysrstn_override_ctrl \
0x00000002
#define GPRCM_APPS_SS_OVERRIDES_mem_apps_sysclk_gating_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_NWP_SS_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_NWP_SS_OVERRIDES_reserved_M \
0xFFFFFC00
#define GPRCM_NWP_SS_OVERRIDES_reserved_S 10
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_refclk_gating_override \
0x00000200
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_refclk_gating_override_ctrl \
0x00000100
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_pllclk_gating_override \
0x00000080
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_pllclk_gating_override_ctrl \
0x00000040
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_por_rstn_override \
0x00000020
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_sysrstn_override \
0x00000010
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_sysclk_gating_override \
0x00000008
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_por_rstn_override_ctrl \
0x00000004
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_sysrstn_override_ctrl \
0x00000002
#define GPRCM_NWP_SS_OVERRIDES_mem_nwp_sysclk_gating_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_SHARED_SS_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_SHARED_SS_OVERRIDES_reserved_M \
0xFFFFFF00
#define GPRCM_SHARED_SS_OVERRIDES_reserved_S 8
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_pllclk_gating_override_ctrl \
0x00000080
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_pllclk_gating_override \
0x00000040
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_refclk_gating_override_ctrl \
0x00000020
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_refclk_gating_override \
0x00000010
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_rstn_override \
0x00000008
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_sysclk_gating_override \
0x00000004
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_rstn_override_ctrl \
0x00000002
#define GPRCM_SHARED_SS_OVERRIDES_mem_shared_sysclk_gating_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_IDMEM_CORE_RST_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_reserved_M \
0xFFFFFF00
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_reserved_S 8
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_mem_idmem_core_sysrstn_override \
0x00000080
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_mem_idmem_core_fmc_rstn_override \
0x00000040
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_SPARE_RW1 \
0x00000020
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_mem_idmem_core_piosc_gating_override \
0x00000010
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_mem_idmem_core_sysrstn_override_ctrl \
0x00000008
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_mem_idmem_core_fmc_rstn_override_ctrl \
0x00000004
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_SPARE_RW0 \
0x00000002
#define GPRCM_IDMEM_CORE_RST_OVERRIDES_mem_idmem_core_piosc_gating_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_TOP_DIE_FSM_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_TOP_DIE_FSM_OVERRIDES_reserved_M \
0xFFFFF000
#define GPRCM_TOP_DIE_FSM_OVERRIDES_reserved_S 12
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_pwr_switch_pgoodin_override_ctrl \
0x00000800
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_pwr_switch_pgoodin_override \
0x00000400
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_hclk_gating_override \
0x00000200
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_piosc_gating_override \
0x00000100
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_rstn_override \
0x00000080
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_pwr_switch_ponin_override \
0x00000040
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_flash_ready_override \
0x00000020
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_hclk_gating_override_ctrl \
0x00000010
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_piosc_gating_override_ctrl \
0x00000008
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_rstn_override_ctrl \
0x00000004
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_d2d_pwr_switch_ponin_override_ctrl \
0x00000002
#define GPRCM_TOP_DIE_FSM_OVERRIDES_mem_flash_ready_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCU_PSCON_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_MCU_PSCON_OVERRIDES_reserved_M \
0xFFF00000
#define GPRCM_MCU_PSCON_OVERRIDES_reserved_S 20
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_sleep_override_ctrl \
0x00080000
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_update_override_ctrl \
0x00040000
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_off_override_ctrl \
0x00020000
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_retain_override_ctrl \
0x00010000
#define GPRCM_MCU_PSCON_OVERRIDES_NU1_M \
0x0000FC00
#define GPRCM_MCU_PSCON_OVERRIDES_NU1_S 10
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_sleep_override \
0x00000200
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_update_override \
0x00000100
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_off_override_M \
0x000000F0
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_off_override_S 4
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_retain_override_M \
0x0000000F
#define GPRCM_MCU_PSCON_OVERRIDES_mem_mcu_pscon_mem_retain_override_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WTOP_PSCON_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_WTOP_PSCON_OVERRIDES_reserved_M \
0xFFC00000
#define GPRCM_WTOP_PSCON_OVERRIDES_reserved_S 22
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_sleep_override_ctrl \
0x00200000
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_update_override_ctrl \
0x00100000
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_off_override_ctrl \
0x00080000
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_retain_override_ctrl \
0x00040000
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_sleep_override \
0x00020000
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_update_override \
0x00010000
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_off_override_M \
0x0000FF00
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_off_override_S 8
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_retain_override_M \
0x000000FF
#define GPRCM_WTOP_PSCON_OVERRIDES_mem_wtop_pscon_mem_retain_override_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WELP_PSCON_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_WELP_PSCON_OVERRIDES_reserved_M \
0xFFFFFFFC
#define GPRCM_WELP_PSCON_OVERRIDES_reserved_S 2
#define GPRCM_WELP_PSCON_OVERRIDES_mem_welp_pscon_sleep_override_ctrl \
0x00000002
#define GPRCM_WELP_PSCON_OVERRIDES_mem_welp_pscon_sleep_override \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_WL_SDIO_PSCON_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_WL_SDIO_PSCON_OVERRIDES_reserved_M \
0xFFFFFFFC
#define GPRCM_WL_SDIO_PSCON_OVERRIDES_reserved_S 2
#define GPRCM_WL_SDIO_PSCON_OVERRIDES_mem_wl_sdio_pscon_sleep_override_ctrl \
0x00000002
#define GPRCM_WL_SDIO_PSCON_OVERRIDES_mem_wl_sdio_pscon_sleep_override \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_MCSPI_PSCON_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_MCSPI_PSCON_OVERRIDES_reserved_M \
0xFFFFFF00
#define GPRCM_MCSPI_PSCON_OVERRIDES_reserved_S 8
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_mem_retain_override_ctrl \
0x00000080
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_mem_off_override_ctrl \
0x00000040
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_mem_retain_override \
0x00000020
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_mem_off_override \
0x00000010
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_mem_update_override_ctrl \
0x00000008
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_mem_update_override \
0x00000004
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_sleep_override_ctrl \
0x00000002
#define GPRCM_MCSPI_PSCON_OVERRIDES_mem_mcspi_pscon_sleep_override \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// GPRCM_O_SSDIO_PSCON_OVERRIDES register.
//
//******************************************************************************
#define GPRCM_SSDIO_PSCON_OVERRIDES_reserved_M \
0xFFFFFFFC
#define GPRCM_SSDIO_PSCON_OVERRIDES_reserved_S 2
#define GPRCM_SSDIO_PSCON_OVERRIDES_mem_ssdio_pscon_sleep_override_ctrl \
0x00000002
#define GPRCM_SSDIO_PSCON_OVERRIDES_mem_ssdio_pscon_sleep_override \
0x00000001
#endif // __HW_GPRCM_H__
Reference in New Issue Copy Permalink