gpio toggle works

source/firmware/arch/stm32f4xx/board/stm32f4-discovery/include/stm32f4-discovery.h

@@ -6,25 +6,48 @@
 #ifndef BSP_STM32F4_DISCOVERY_H_
 #define BSP_STM32F4_DISCOVERY_H_
 
-#define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
-
 #include <stddef.h>
 #include <stdint.h>
-
-#include "driver.h"
-#include "gpio.h"
+#if 0
+#include "../../../../../kernel/include/sys_tick.h"
+#include "../../../driver/include/stm32_sys_tick.h"
+#include "../../../driver/include/stm32f4_pwm.h"
+#include "../../../driver/include/stm32f4_uart.h"
 #include "pwm.h"
 #include "timer.h"
 #include "uart.h"
 #include "ringbuffer.h"
-#include "sys_tick.h"
+#endif
 #include "stm32f4xx.h"
+#include "gpio.h"
 #include "stm32f4_gpio.h"
-#include "stm32f4_pwm.h"
-#include "stm32f4_uart.h"
-#include "stm32_sys_tick.h"
+#include "driver.h"
+
+// GPIO_D12
+static const GPIO_InitTypeDef port_cfg_d12 = {
+		.Pin = GPIO_PIN_12,
+		.Mode = GPIO_MODE_OUTPUT_PP,
+		.Speed = GPIO_SPEED_FREQ_HIGH,
+		.Pull = GPIO_PULLUP,
+};
+
+static const struct stm32f4_gpio stm32_f4_gpio_d12 = {
+		.port = GPIOD,
+		.pin = &port_cfg_d12,
+};
+
+static const struct gpio __gpio_d12 = {
+		(void*)&stm32_f4_gpio_d12,
+		&gpio_fp
+};
+
+const struct driver gpio_d12 = {
+		DRIVER_TYPE_GPIO,
+		&__gpio_d12,
+};
 
 
+#if 0
 // SYSTEM TICK
 static const enum stm32_sys_tick_time_base stm23_sys_tick_time_base =
 		STM32_SYS_TICK_TIME_BASE_MS;
@@ -38,7 +61,8 @@ static const struct loki_timer timer_1 = {
 		(void*)&stm32_sys_tick,
 		&timer_fp
 };
-
+#endif
+#if 0
 // PWM CHANNEL 4
 /* apb1 clock = 84MHz */
 /* period_reg = src_clk / presc   / cnt_clk     */
@@ -93,7 +117,8 @@ const struct driver pwm_4 = {
 		DRIVER_TYPE_PWM,
 		&pwm_ch4,
 };
-
+#endif
+#if 0
 // PWM Channel 3
 static const GPIO_InitTypeDef port_cfg_D14 = {
 		.GPIO_Pin = GPIO_Pin_14,
@@ -126,7 +151,8 @@ const struct driver pwm_3 = {
 		DRIVER_TYPE_PWM,
 		&pwm_ch3,
 };
-
+#endif
+#if 0
 // PWM Channel 2
 static const GPIO_InitTypeDef port_cfg_D13 = {
 		.GPIO_Pin = GPIO_Pin_13,
@@ -159,7 +185,8 @@ const struct driver pwm_2 = {
 		DRIVER_TYPE_PWM,
 		&pwm_ch2,
 };
-
+#endif
+#if 0
 // PWM Channel 1
 static const GPIO_InitTypeDef port_cfg_D12 = {
 		.GPIO_Pin = GPIO_Pin_12,
@@ -192,7 +219,8 @@ const struct driver pwm_1 = {
 		DRIVER_TYPE_PWM,
 		&pwm_ch1,
 };
-
+#endif
+#if 0
 // UART 1
 static char console_linear_buffer[80];
 static struct ringbuffer console_buffer = {
@@ -252,7 +280,8 @@ const struct driver uart_1 = {
 		DRIVER_TYPE_UART,
 		&__uart_1,
 };
-
+#endif
+#if 0
 // GPIOC0
 static const GPIO_InitTypeDef port_cfg_C0 = {
 		GPIO_Pin_0,
@@ -284,7 +313,8 @@ const struct driver gpio_c0 = {
 		DRIVER_TYPE_GPIO,
 		&__gpio_c0,
 };
-
+#endif
+#if 0
 // GPIO_C1
 static const GPIO_InitTypeDef port_cfg_C1 = {
 		GPIO_Pin_1,
@@ -316,7 +346,8 @@ const struct driver gpio_c1 = {
 		DRIVER_TYPE_GPIO,
 		&__gpio_c1,
 };
-
+#endif
+#if 0
 // GPIO_C2
 static const GPIO_InitTypeDef port_cfg_C2 = {
 		GPIO_Pin_2,
@@ -348,7 +379,8 @@ const struct driver gpio_c2 = {
 		DRIVER_TYPE_GPIO,
 		&__gpio_c2,
 };
-
+#endif
+#if 0
 // GPIO_C3
 static const GPIO_InitTypeDef port_cfg_C3 = {
 		GPIO_Pin_3,
@@ -380,7 +412,7 @@ const struct driver gpio_c3 = {
 		DRIVER_TYPE_GPIO,
 		&__gpio_c3,
 };
-
+#endif
 //! \brief Setup the hardware of the stm32f4-discovery board.
 void board_init(void);