Add application skeleton for st7789_lcd app

Makefile

@@ -8,7 +8,6 @@ TARGET_FILE ?= $(APPLICATION).elf
 CC = $(CROSS_COMPILE)gcc
 CPP = $(CROSS_COMPILE)cpp
 OBJCOPY = $(CROSS_COMPILE)objcopy
-SIZE = $(CROSS_COMPILE)size
 
 SRC_DIR = src
 OBJ_DIR = obj/$(PLATFORM)
@@ -57,7 +56,6 @@ $(TARGET): $(OBJS) $(THIS_MAKEFILE)
 	@mkdir -p $(dir $@)
 	$(CC) $(CC_FLAGS) $(LD_FLAGS) $(OBJS) $(addprefix -l,$(LIBS)) -o $@
 	ln -sf $(shell pwd)/$@ $(shell pwd)/bin/firmware.elf
-	$(SIZE) -x $@
 
 $(TARGET_HEX): $(TARGET) $(THIS_MAKEFILE)
 	$(OBJCOPY) -O ihex $(TARGET) $(TARGET_HEX)

include/framebuffer.h

@@ -1,12 +0,0 @@
-#ifndef __INCLUDE_FRAMEBUFFER_H__
-#define __INCLUDE_FRAMEBUFFER_H__
-
-#include <stdint.h>
-
-void fb_draw_pixel(uint16_t *image, uint16_t x, uint16_t y, uint16_t color);
-void fb_draw_line(uint16_t *image, int16_t x0, int16_t y0, int16_t x1, int16_t y1, uint16_t color);
-
-void fb_load_image(uint16_t *dst, uint16_t *src, uint32_t length);
-void fb_set_image(uint16_t *dst, uint16_t value, uint32_t length);
-
-#endif

include/platform/nrf52/nrf52-dk.h

@@ -5,7 +5,6 @@
 
 #include "gpio.h"
 #include "spi.h"
-#include "st7789.h"
 
 // LED 1
 const struct gpio nrf_led_1 = {
@@ -51,67 +50,17 @@ const struct driver led_4 = {
     .dev = &nrf_led_4
 };
 
-// LCD
 // SPI 0
 const struct spi nrf_spi_0 = {
     .sck_pin = 2,
     .mosi_pin = 3,
-    .miso_pin = 4
+    .miso_pin = 0xff,
+    .ss_pin = 25
 };
 const struct driver spi_0 = {
     .name = "SPI0",
     .fp = &spi_fp,
     .dev = &nrf_spi_0
 };
-const struct gpio nrf_dc_pin = {
-    .pin = 18,
-    .dir = OUT
-};
-const struct driver dc_pin = {
-    .name = "DC",
-    .fp = &gpio_fp,
-    .dev = &nrf_dc_pin
-};
-const struct gpio nrf_bl_pin = {
-    .pin = 23,
-    .dir = OUT
-};
-const struct driver bl_pin = {
-    .name = "BACKLIGHT",
-    .fp = &gpio_fp,
-    .dev = &nrf_bl_pin
-};
-const struct gpio nrf_rst_pin = {
-    .pin = 26,
-    .dir = OUT
-};
-const struct driver rst_pin = {
-    .name = "RESET",
-    .fp = &gpio_fp,
-    .dev = &nrf_rst_pin
-};
-const struct gpio nrf_select_pin = {
-    .pin = 25,
-    .dir = OUT
-};
-const struct driver select_pin = {
-    .name = "SELECT",
-    .fp = &gpio_fp,
-    .dev = &nrf_select_pin
-};
-struct st7789 nrf_lcd = {
-    .spi = &spi_0,
-    .dc = &dc_pin,
-    .bl = &bl_pin,
-    .rst = &rst_pin,
-    .select = &select_pin,
-    .height = 240,
-    .width = 240,
-};
-const struct driver lcd = {
-    .name = "LCD",
-    .fp = &st7789_fp,
-    .dev = &nrf_lcd
-};
 
 #endif

include/spi.h

@@ -1,23 +1,29 @@
 #ifndef __NRF52_SPI_H__
 #define __NRF52_SPI_H__
 
+#include <stdint.h>
+
+#include "driver.h"
+
 int spi_open(const struct driver *drv);
 int spi_close(const struct driver *drv);
 
+int spi_read(const struct driver *drv, char *buffer, unsigned int len);
 int spi_write(const struct driver *drv, const char *buffer, unsigned int len);
 
 struct spi {
-    unsigned int sck_pin;
+    uint8_t sck_pin;
-    unsigned int mosi_pin;
+    uint8_t mosi_pin;
-    unsigned int miso_pin;
+    uint8_t miso_pin;
+    uint8_t ss_pin;
 };
 
 static const struct driver_fp spi_fp = {
     .open = spi_open,
     .close = spi_close,
-    .read = NULL,
+    .read = spi_read,
     .write = spi_write,
     .ioctl = NULL
 };
 
-#endif
+#endif

include/st7789.h

@@ -1,30 +0,0 @@
-#ifndef __ST7789_H__
-#define __ST7789_H__
-
-#include <stddef.h>
-
-#include "driver.h"
-
-int st7789_open(const struct driver *drv);
-int st7789_close(const struct driver *drv);
-int st7789_write(const struct driver *drv, const char *buffer, unsigned int len);
-
-struct st7789 {
-    const struct driver *spi;
-    const struct driver *dc;
-    const struct driver *bl;
-    const struct driver *rst;
-    const struct driver *select;
-    unsigned int height;
-    unsigned int width;
-};
-
-static const struct driver_fp st7789_fp = {
-    .open = st7789_open,
-    .close = st7789_close,
-    .read = NULL,
-    .write = st7789_write,
-    .ioctl = NULL,
-};
-
-#endif

src/application/spi/main.c

@@ -1,3 +1,43 @@
+/**
+ * Copyright (c) 2015 - 2019, Nordic Semiconductor ASA
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ *
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ *
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ *
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include "nrf_drv_spi.h"
 #include "app_util_platform.h"
 #include "nrf_gpio.h"
 #include "nrf_delay.h"
@@ -8,29 +48,63 @@
 #include "nrf_log_ctrl.h"
 #include "nrf_log_default_backends.h"
 
-#include "board.h"
+#define SPI_INSTANCE  0 /**< SPI instance index. */
-#include "driver.h"
+static const nrf_drv_spi_t spi = NRF_DRV_SPI_INSTANCE(SPI_INSTANCE);  /**< SPI instance. */
+static volatile bool spi_xfer_done;  /**< Flag used to indicate that SPI instance completed the transfer. */
 
-const char buf[] = "Test";
+#define TEST_STRING "Nordic"
+static uint8_t       m_tx_buf[] = TEST_STRING;           /**< TX buffer. */
+static uint8_t       m_rx_buf[sizeof(TEST_STRING) + 1];    /**< RX buffer. */
+static const uint8_t m_length = sizeof(m_tx_buf);        /**< Transfer length. */
+
+/**
+ * @brief SPI user event handler.
+ * @param event
+ */
+void spi_event_handler(nrf_drv_spi_evt_t const * p_event,
+                       void *                    p_context)
+{
+    spi_xfer_done = true;
+    NRF_LOG_INFO("Transfer completed.");
+    if (m_rx_buf[0] != 0)
+    {
+        NRF_LOG_INFO(" Received:");
+        NRF_LOG_HEXDUMP_INFO(m_rx_buf, strlen((const char *)m_rx_buf));
+    }
+}
 
 int main(void)
 {
-    unsigned int cnt = 0;
+    bsp_board_init(BSP_INIT_LEDS);
+
     APP_ERROR_CHECK(NRF_LOG_INIT(NULL));
     NRF_LOG_DEFAULT_BACKENDS_INIT();
 
-    drv_open(&led_1);
+    nrf_drv_spi_config_t spi_config = NRF_DRV_SPI_DEFAULT_CONFIG;
-    drv_open(&spi_0);
+    spi_config.ss_pin   = SPI_SS_PIN;
+    spi_config.miso_pin = SPI_MISO_PIN;
+    spi_config.mosi_pin = SPI_MOSI_PIN;
+    spi_config.sck_pin  = SPI_SCK_PIN;
+    APP_ERROR_CHECK(nrf_drv_spi_init(&spi, &spi_config, spi_event_handler, NULL));
 
     NRF_LOG_INFO("SPI example started.");
 
-    while(1) {
+    while (1)
-        char c = (cnt++ % 2) + 0x30;
+    {
-        drv_write(&led_1, &c, 1);
+        // Reset rx buffer and transfer done flag
-        drv_write(&spi_0, buf, sizeof(buf));
+        memset(m_rx_buf, 0, m_length);
+        spi_xfer_done = false;
+
+        APP_ERROR_CHECK(nrf_drv_spi_transfer(&spi, m_tx_buf, m_length, m_rx_buf, m_length));
+
+        while (!spi_xfer_done)
+        {
+            __WFE();
+        }
 
         NRF_LOG_FLUSH();
 
+        bsp_board_led_invert(BSP_BOARD_LED_0);
         nrf_delay_ms(200);
     }
 }

src/application/st7789_lcd/main.c

@@ -1,33 +1,30 @@
-#include "app_util_platform.h"
-#include "nrf_gpio.h"
-#include "nrf_delay.h"
-#include "boards.h"
-#include "app_error.h"
 #include <string.h>
-#include "nrf_log.h"
-#include "nrf_log_ctrl.h"
-#include "nrf_log_default_backends.h"
 
+#include "app_util_platform.h"
 #include "board.h"
-#include "driver.h"
+#include "app_error.h"
 
+#include "driver.h"
+#include "delay.h"
+
+const char buffer[] = "Hello world!\r\n";
 int main(void)
 {
-    unsigned int cnt = 0;
+    unsigned int i = 0;
-    APP_ERROR_CHECK(NRF_LOG_INIT(NULL));
-    NRF_LOG_DEFAULT_BACKENDS_INIT();
-
     drv_open(&led_1);
-    drv_open(&lcd);
+    drv_write(&led_1, "1", 1);
+    drv_open(&spi_0);
 
-    NRF_LOG_INFO("SPI example started.");
+    // APP_ERROR_CHECK(NRF_LOG_INIT(NULL));
+    // NRF_LOG_DEFAULT_BACKENDS_INIT();
+
+    // NRF_LOG_INFO("SPI example started.");
 
     while(1) {
-        char c = (cnt++ % 2) + 0x30;
+        drv_write(&spi_0, buffer, sizeof(buffer));
+        // NRF_LOG_FLUSH();
+        char c = (i++ % 2) + 0x30;
         drv_write(&led_1, &c, 1);
-
+        delay_ms(200);
-        NRF_LOG_FLUSH();
-
-        nrf_delay_ms(200);
     }
 }

src/framebuffer.c

@@ -1,76 +0,0 @@
-#include <assert.h>
-#include <stddef.h>
-#include <stdlib.h>
-
-#include "framebuffer.h"
-
-void fb_draw_pixel(uint16_t *image, uint16_t x, uint16_t y, uint16_t color)
-{
-    assert(image != NULL);
-
-    image[x + 240 * y] = color;
-}
-
-#ifndef _swap_int16_t
-#define _swap_int16_t(a, b) { int16_t t = a; a = b; b = t; }
-#endif
-
-void fb_draw_line(uint16_t *image, int16_t x0, int16_t y0, int16_t x1, int16_t y1, uint16_t color)
-{
-    assert(image != NULL);
-
-    int16_t steep = abs(y1 - y0) > abs(x1 - x0);
-    if(steep) {
-        _swap_int16_t(x0, y0);
-        _swap_int16_t(x1, y1);
-    }
-    if(x0 > x1) {
-        _swap_int16_t(x0, x1);
-        _swap_int16_t(y0, y1);
-    }
-
-    int16_t dx, dy;
-    dx = x1 - x0;
-    dy = abs(y1 - y0);
-
-    int16_t err = dx / 2;
-    int16_t ystep;
-
-    if(y0 < y1) {
-        ystep = 1;
-    } else {
-        ystep = -1;
-    }
-
-    for(; x0 <= x1; x0++) {
-        if(steep) {
-            fb_draw_pixel(image, y0, x0, color);
-        } else {
-            fb_draw_pixel(image, x0, y0, color);
-        }
-        err -= dy;
-        if (err < 0) {
-            y0 += ystep;
-            err += dx;
-        }
-    }
-}
-
-void fb_load_image(uint16_t *dst, uint16_t *src, uint32_t length)
-{
-    assert(NULL != dst);
-    assert(NULL != src);
-
-    for(uint32_t i = 0; i < length; i++) {
-        dst[i] = src[i];
-    }
-}
-
-void fb_set_image(uint16_t *dst, uint16_t value, uint32_t length)
-{
-    assert(NULL != dst);
-
-    for (uint32_t i = 0; i < length; i++) {
-        dst[i] = value;
-    }
-}

src/platform/nrf52/spi.c

@@ -1,61 +1,86 @@
 #include <assert.h>
-#include <stddef.h>
 
-#include "nrf.h"
+#include "nrf_drv_spi.h"
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
 
 #include "driver.h"
 #include "spi.h"
 
-static inline int spi_transfer(uint32_t t);
+#define SPI_INSTANCE    0
+static const nrf_drv_spi_t spi = NRF_DRV_SPI_INSTANCE(SPI_INSTANCE);
+static volatile bool spi_xfer_done;
+
+struct spi_object {
+    uint8_t *rx_buf;
+    uint8_t *tx_buf;
+    uint32_t rx_len;
+    uint32_t tx_len;
+};
+
+uint8_t rx_buffer[1];
+uint8_t tx_buffer[20];
+static struct spi_object spi_obj = {
+    .rx_buf = rx_buffer,
+    .tx_buf = tx_buffer,
+    .rx_len = sizeof(rx_buffer),
+    .tx_len = sizeof(tx_buffer)
+};
+
+void spi_event_handler(nrf_drv_spi_evt_t const * p_event, void * p_context)
+{
+    spi_xfer_done = true;
+    NRF_LOG_INFO("Transfer completed.");
+}
 
 int spi_open(const struct driver *drv)
 {
     assert(NULL != drv);
 
-    struct spi *this = (struct spi *)drv->dev;
+    struct spi *this = (struct spi *)(drv->dev);
 
-    NRF_SPI0->ENABLE = 0;
+    nrf_drv_spi_config_t spi_config = NRF_DRV_SPI_DEFAULT_CONFIG;
-    NRF_SPI0->PSELSCK = this->sck_pin;
+    spi_config.ss_pin = this->ss_pin;
-    NRF_SPI0->PSELMOSI = this->mosi_pin;
+    spi_config.miso_pin = this->miso_pin;
-    NRF_SPI0->PSELMISO = this->miso_pin;
+    spi_config.mosi_pin = this->mosi_pin;
-    NRF_SPI0->FREQUENCY = SPI_FREQUENCY_FREQUENCY_M8;
+    spi_config.sck_pin  = this->sck_pin;
-
+    APP_ERROR_CHECK(nrf_drv_spi_init(&spi, &spi_config, spi_event_handler, NULL));
-    NRF_SPI0->CONFIG = (0x03 << 1); //Sample on trailing edge of clock, shift serial data on leading edge, SCK polarity Active low
-    NRF_SPI0->EVENTS_READY = 0;
-    NRF_SPI0->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
 
     return 0;
 }
 
 int spi_close(const struct driver *drv)
 {
-    NRF_SPI0->ENABLE = 0;
+    assert(NULL != drv);
+
+    return 0;
+}
+
+int spi_read(const struct driver *drv, char *buffer, unsigned int len)
+{
+    assert((NULL != drv) && (NULL != buffer));
+
+    NRF_LOG_INFO("spi read not implemented yet.");
 
     return 0;
 }
 
 int spi_write(const struct driver *drv, const char *buffer, unsigned int len)
 {
-    assert(NULL != buffer);
+    if(len > spi_obj.tx_len) {
-
+        NRF_LOG_ERROR("buffer too small");
-    //FIXME: missing CS handling
+        return 0;
-
-    for(unsigned int i = 0; i < len; i++) {
-        spi_transfer(buffer[i]);
     }
+    memcpy(spi_obj.tx_buf, buffer, len);
 
-    //FIXME: missing CS handling
+    // Reset transfer done flag
+    spi_xfer_done = false;
 
-    return len;
+    APP_ERROR_CHECK(nrf_drv_spi_transfer(&spi, spi_obj.tx_buf, spi_obj.tx_len, spi_obj.rx_buf, spi_obj.rx_len));
-}
 
-static inline int spi_transfer(uint32_t t)
+    while(!spi_xfer_done) {
-{
+        __WFE();
-    volatile uint32_t r;
-    NRF_SPI0->EVENTS_READY = 0;           // ready
-    NRF_SPI0->TXD = t;          // out
-    while(NRF_SPI0->EVENTS_READY == 0) {
     }
-    r = NRF_SPI0->RXD;                    // in
+    return (int)len;
-    return (int)r;
 }

src/st7789.c

@@ -1,192 +0,0 @@
-#include <assert.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <unistd.h>
-
-#include "delay.h"
-#include "st7789.h"
-
-static void send_cmd(const struct driver *drv, uint8_t cmd);
-static void send_data_8bit(const struct driver *drv, uint8_t data);
-
-static void lcd_init(const struct driver *drv);
-static void lcd_set_windows(const struct driver *drv, uint16_t x_start, uint16_t y_start, uint16_t x_end, uint16_t y_end);
-
-static void lcd_clear(const struct driver *drv, uint16_t Color)
-{
-    unsigned int i,j;
-    struct st7789 *this = (struct st7789*)(drv->dev);
-
-    lcd_set_windows(drv, 0, 0, 240, 240);
-    drv_write(this->dc, "1", 1);
-    for(i = 0; i < 240; i++) {
-        for(j = 0; j < 240; j++){
-            char c = (Color >> 8) & 0xff;
-            drv_write(this->spi, &c, 1);
-            c = Color & 0xff;
-            drv_write(this->spi, &c, 1);
-        }
-    }
-}
-
-int st7789_open(const struct driver *drv)
-{
-    assert(drv != NULL);
-    struct st7789 *this = (struct st7789*)(drv->dev);
-    drv_open(this->rst);
-    drv_write(this->rst, "1", 1);
-    drv_open(this->dc);
-    drv_write(this->dc, "1", 1);
-    drv_open(this->bl);
-    drv_write(this->bl, "1", 1);
-
-    drv_open(this->select);
-    drv_write(this->select, "0", 1);
-
-    drv_open(this->spi);
-    // hard reset
-    drv_write(this->rst, "0", 1);
-    delay_ms(100);
-    drv_write(this->rst, "1", 1);
-    delay_ms(100);
-
-    lcd_init(drv);
-
-    lcd_clear(drv, 0x0000);
-
-    return 0;
-}
-
-int st7789_close(const struct driver *drv)
-{
-    assert(drv != NULL);
-    struct st7789 *this = (struct st7789*)(drv->dev);
-    drv_close(this->rst);
-    drv_close(this->dc);
-    drv_close(this->bl);
-    drv_close(this->spi);
-    return 0;
-}
-
-int st7789_write(const struct driver *drv, const char *buffer, unsigned int len)
-{
-    assert(drv != NULL);
-    struct st7789 *this = (struct st7789*)(drv->dev);
-    uint16_t *image = (uint16_t *)buffer;
-    lcd_set_windows(drv, 0, 0, this->width, this->height);
-    drv_write(this->dc, "1", 1);
-    for (uint16_t i = 0; i < this->height; i++) {
-        drv_write(this->spi, (const char *)&image[i * this->width], len);
-    }
-    return len;
-}
-
-static void send_cmd(const struct driver *drv, uint8_t cmd)
-{
-    assert(drv != NULL);
-    struct st7789 *this = (struct st7789*)(drv->dev);
-    drv_write(this->dc, "0", 1);
-    drv_write(this->spi, (const char* )&cmd, 1);
-}
-
-static void send_data_8bit(const struct driver *drv, uint8_t data)
-{
-    assert(drv != NULL);
-    struct st7789 *this = (struct st7789*)(drv->dev);
-    drv_write(this->dc, "1", 1);
-    drv_write(this->spi, (const char* )&data, 1);
-}
-
-static void lcd_init(const struct driver *drv)
-{
-    send_cmd(drv, 0x36);
-    send_data_8bit(drv, 0x00);
-
-    send_cmd(drv, 0x3A);
-    send_data_8bit(drv, 0x05);
-
-    send_cmd(drv, 0xB2);
-    send_data_8bit(drv, 0x0C);
-    send_data_8bit(drv, 0x0C);
-    send_data_8bit(drv, 0x00);
-    send_data_8bit(drv, 0x33);
-    send_data_8bit(drv, 0x33);
-
-    send_cmd(drv, 0xB7);  //Gate Control
-    send_data_8bit(drv, 0x35);
-
-    send_cmd(drv, 0xBB);  //VCOM Setting
-    send_data_8bit(drv, 0x19);
-
-    send_cmd(drv, 0xC0); //LCM Control
-    send_data_8bit(drv, 0x2C);
-
-    send_cmd(drv, 0xC2);  //VDV and VRH Command Enable
-    send_data_8bit(drv, 0x01);
-    send_cmd(drv, 0xC3);  //VRH Set
-    send_data_8bit(drv, 0x12);
-    send_cmd(drv, 0xC4);  //VDV Set
-    send_data_8bit(drv, 0x20);
-
-    send_cmd(drv, 0xC6);  //Frame Rate Control in Normal Mode
-    send_data_8bit(drv, 0x0F);
-    
-    send_cmd(drv, 0xD0);  // Power Control 1
-    send_data_8bit(drv, 0xA4);
-    send_data_8bit(drv, 0xA1);
-
-    send_cmd(drv, 0xE0);  //Positive Voltage Gamma Control
-    send_data_8bit(drv, 0xD0);
-    send_data_8bit(drv, 0x04);
-    send_data_8bit(drv, 0x0D);
-    send_data_8bit(drv, 0x11);
-    send_data_8bit(drv, 0x13);
-    send_data_8bit(drv, 0x2B);
-    send_data_8bit(drv, 0x3F);
-    send_data_8bit(drv, 0x54);
-    send_data_8bit(drv, 0x4C);
-    send_data_8bit(drv, 0x18);
-    send_data_8bit(drv, 0x0D);
-    send_data_8bit(drv, 0x0B);
-    send_data_8bit(drv, 0x1F);
-    send_data_8bit(drv, 0x23);
-
-    send_cmd(drv, 0xE1);  //Negative Voltage Gamma Control
-    send_data_8bit(drv, 0xD0);
-    send_data_8bit(drv, 0x04);
-    send_data_8bit(drv, 0x0C);
-    send_data_8bit(drv, 0x11);
-    send_data_8bit(drv, 0x13);
-    send_data_8bit(drv, 0x2C);
-    send_data_8bit(drv, 0x3F);
-    send_data_8bit(drv, 0x44);
-    send_data_8bit(drv, 0x51);
-    send_data_8bit(drv, 0x2F);
-    send_data_8bit(drv, 0x1F);
-    send_data_8bit(drv, 0x1F);
-    send_data_8bit(drv, 0x20);
-    send_data_8bit(drv, 0x23);
-
-    send_cmd(drv, 0x21);  //Display Inversion On
-    send_cmd(drv, 0x11);  //Sleep Out
-    send_cmd(drv, 0x29);  //Display On
-}
-
-static void lcd_set_windows(const struct driver *drv, uint16_t x_start, uint16_t y_start, uint16_t x_end, uint16_t y_end)
-{
-    //set the X coordinates
-    send_cmd(drv, 0x2A);
-    send_data_8bit(drv, (x_start >> 8) & 0xFF);
-    send_data_8bit(drv, x_start & 0xFF);
-    send_data_8bit(drv, ((x_end  - 1) >> 8) & 0xFF);
-    send_data_8bit(drv, (x_end  - 1) & 0xFF);
-
-    //set the Y coordinates
-    send_cmd(drv, 0x2B);
-    send_data_8bit(drv, (y_start >> 8) & 0xFF);
-    send_data_8bit(drv, y_start & 0xFF);
-    send_data_8bit(drv, ((y_end  - 1) >> 8) & 0xFF);
-    send_data_8bit(drv, (y_end  - 1) & 0xFF);
-
-    send_cmd(drv, 0X2C);
-}