/** ****************************************************************************** * @file stm32g0xx_hal.h * @author MCD Application Team * @brief This file contains all the functions prototypes for the HAL * module driver. ****************************************************************************** * @attention * *

© Copyright (c) 2018 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32G0xx_HAL_H #define STM32G0xx_HAL_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32g0xx_hal_conf.h" /** @addtogroup STM32G0xx_HAL_Driver * @{ */ /** @defgroup HAL HAL * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup HAL_TICK_FREQ Tick Frequency * @{ */ typedef enum { HAL_TICK_FREQ_10HZ = 100U, HAL_TICK_FREQ_100HZ = 10U, HAL_TICK_FREQ_1KHZ = 1U, HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ } HAL_TickFreqTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup HAL_Exported_Constants HAL Exported Constants * @{ */ /** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants * @{ */ /** @defgroup SYSCFG_BootMode Boot Mode * @{ */ #define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */ #define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */ #define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */ /** * @} */ /** @defgroup SYSCFG_Break Break * @{ */ #define SYSCFG_BREAK_SP SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM Parity error signal with Break Input of TIM1/15/16/17 */ #if defined(SYSCFG_CFGR2_PVDL) #define SYSCFG_BREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ #endif /* SYSCFG_CFGR2_PVDL */ #define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/15/16/17 */ #define SYSCFG_BREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC of CortexM0+ with Break Input of TIM1/15/16/17 */ /** * @} */ #if defined(SYSCFG_CDEN_SUPPORT) /** @defgroup SYSCFG_ClampingDiode Clamping Diode * @{ */ #define SYSCFG_CDEN_PA1 SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping Diode on PA1 */ #define SYSCFG_CDEN_PA3 SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping Diode on PA3 */ #define SYSCFG_CDEN_PA5 SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping Diode on PA5 */ #define SYSCFG_CDEN_PA6 SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping Diode on PA6 */ #define SYSCFG_CDEN_PA13 SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping Diode on PA13 */ #define SYSCFG_CDEN_PB0 SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping Diode on PB0 */ #define SYSCFG_CDEN_PB1 SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping Diode on PB1 */ #define SYSCFG_CDEN_PB2 SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping Diode on PB2 */ /** * @} */ #endif /* SYSCFG_CDEN_SUPPORT */ /** @defgroup HAL_Pin_remapping Pin remapping * @{ */ /* Only available on cut2.0 */ #define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */ #define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */ /** * @} */ /** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection * @{ */ #define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */ #define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */ #if defined(USART4) #define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IR Modulation envelope source */ #else #define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */ #endif /* USART4 */ /** * @} */ /** @defgroup HAL_IR_POL_SEL IR output polarity selection * @{ */ #define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */ #define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */ /** * @} */ #if defined(VREFBUF) /** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale * @{ */ #define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0: VREF_OUT1 around 2.048 V. This requires VDDA equal to or higher than 2.4 V. */ #define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1: VREF_OUT1 around 2.5 V. This requires VDDA equal to or higher than 2.8 V. */ /** * @} */ /** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance * @{ */ #define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0x00000000U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ #define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ /** * @} */ #endif /* VREFBUF */ /** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO * @{ */ /** @brief Fast mode Plus driving capability on a specific GPIO */ #define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */ #define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */ #define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */ #define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */ #define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */ #define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */ /** * @} */ /** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx * @{ */ /** @brief Fast mode Plus driving capability on a specific GPIO */ #define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */ #define SYSCFG_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast mode Plus on I2C2 */ #if defined (I2C3) #define SYSCFG_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast mode Plus on I2C3 */ #endif /* I2C3 */ /** * @} */ #if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) /** @defgroup SYSCFG_UCPDx_STROBE SYSCFG Dead Battery feature configuration * @{ */ #define SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 Dead battery sw configuration */ #define SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 Dead battery sw configuration */ /** * @} */ #endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */ /** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper * @brief ISR Wrapper * @{ */ #define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE1 0x00000001U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE8 0x00000008U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE15 0x0000000FU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE17 0x00000011U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE18 0x00000012U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE20 0x00000014U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE24 0x00000018U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE26 0x0000001AU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE29 0x0000001DU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE30 0x0000001EU /*!< Internal define for macro handling */ #define HAL_SYSCFG_ITLINE31 0x0000001FU /*!< Internal define for macro handling */ #define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG) /*!< WWDG has expired .... */ #if defined (PWR_PVD_SUPPORT) #define HAL_ITLINE_PVDOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT) /*!< Power voltage detection Interrupt .... */ #endif /* PWR_PVD_SUPPORT */ #if defined (PWR_PVM_SUPPORT) #define HAL_ITLINE_PVMOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVMOUT) /*!< Power voltage monitor Interrupt .... */ #endif /* PWR_PVM_SUPPORT */ #define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC -> exti[19] Interrupt */ #define HAL_ITLINE_TAMPER ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_TAMPER) /*!< TAMPER -> exti[21] interrupt .... */ #define HAL_ITLINE_FLASH_ECC ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ECC) /*!< Flash ECC Interrupt */ #define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */ #define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */ #if defined (CRS) #define HAL_ITLINE_CRS ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS) /*!< CRS Interrupt */ #endif /*CRS */ #define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */ #define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */ #define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */ #define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */ #define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */ #define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */ #define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */ #define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */ #define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */ #define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */ #define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */ #define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */ #define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */ #define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */ #define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */ #define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */ #if defined (UCPD1) #define HAL_ITLINE_UCPD1 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD1) /*!< UCPD1 Interrupt */ #endif /* UCPD1 */ #if defined (UCPD2) #define HAL_ITLINE_UCPD2 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD2) /*!< UCPD2 Interrupt */ #endif /* UCPD2 */ #if defined (STM32G0C1xx) || defined (STM32G0B1xx) || defined (STM32G0B0xx) #define HAL_ITLINE_USB ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_USB) /*!< USB Interrupt */ #endif /* STM32G0C1xx) || STM32G0B1xx) || STM32G0B0xx */ #define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */ #define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */ #define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */ #define HAL_ITLINE_DMAMUX1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX1) /*!< DMAMUX1 Interrupt */ #define HAL_ITLINE_DMA1_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4) /*!< DMA1 Channel 4 Interrupt */ #define HAL_ITLINE_DMA1_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5) /*!< DMA1 Channel 5 Interrupt */ #if defined(DMA1_Channel7) #define HAL_ITLINE_DMA1_CH6 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6) /*!< DMA1 Channel 6 Interrupt */ #define HAL_ITLINE_DMA1_CH7 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7) /*!< DMA1 Channel 7 Interrupt */ #endif /* DMA1_Channel7 */ #if defined (DMA2) #define HAL_ITLINE_DMA2_CH1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH1) /*!< DMA2 Channel 1 Interrupt */ #define HAL_ITLINE_DMA2_CH2 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH2) /*!< DMA2 Channel 2 Interrupt */ #define HAL_ITLINE_DMA2_CH3 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3) /*!< DMA2 Channel 3 Interrupt */ #define HAL_ITLINE_DMA2_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4) /*!< DMA2 Channel 4 Interrupt */ #define HAL_ITLINE_DMA2_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5) /*!< DMA2 Channel 5 Interrupt */ #endif /* DMA2 */ #define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */ #if defined (COMP1) #define HAL_ITLINE_COMP1 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1) /*!< COMP1 Interrupt -> exti[17] */ #endif /* COMP1 */ #if defined (COMP2) #define HAL_ITLINE_COMP2 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2) /*!< COMP2 Interrupt -> exti[18] */ #endif /* COMP2 */ #if defined (COMP3) #define HAL_ITLINE_COMP3 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP3) /*!< COMP3 Interrupt -> exti[1x] */ #endif /* COMP3 */ #define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */ #define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */ #define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */ #define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */ #define HAL_ITLINE_TIM1_CC ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC) /*!< TIM1 CC Interrupt */ #if defined (TIM2) #define HAL_ITLINE_TIM2 ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB) /*!< TIM2 Interrupt */ #endif /* TIM2 */ #define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */ #if defined (TIM4) #define HAL_ITLINE_TIM4 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM4_GLB) /*!< TIM4 Interrupt */ #endif /* TIM4 */ #if defined(TIM6) #define HAL_ITLINE_TIM6 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB) /*!< TIM6 Interrupt */ #endif /* TIM6 */ #if defined(DAC1) #define HAL_ITLINE_DAC ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC) /*!< DAC Interrupt */ #endif /* DAC1 */ #if defined(LPTIM1) #define HAL_ITLINE_LPTIM1 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_LPTIM1_GLB) /*!< LPTIM1 Interrupt -> exti[29] */ #endif /* LPTIM1 */ #if defined(TIM7) #define HAL_ITLINE_TIM7 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB) /*!< TIM7 Interrupt */ #endif /* TIM7 */ #if defined(LPTIM2) #define HAL_ITLINE_LPTIM2 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_LPTIM2_GLB) /*!< LPTIM2 Interrupt -> exti[30] */ #endif /* LPTIM2 */ #define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */ #if defined(TIM15) #define HAL_ITLINE_TIM15 ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB) /*!< TIM15 Interrupt */ #endif /* TIM15 */ #define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */ #if defined (FDCAN1) || defined (FDCAN2) #define HAL_ITLINE_FDCAN1_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN1_IT0) /*!< FDCAN1_IT0 Interrupt */ #define HAL_ITLINE_FDCAN2_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN2_IT0) /*!< FDCAN2_IT0 Interrupt */ #endif /* FDCAN1 || FDCAN2 */ #define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */ #if defined (FDCAN1) || defined (FDCAN2) #define HAL_ITLINE_FDCAN1_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN1_IT1) /*!< FDCAN1_IT1 Interrupt */ #define HAL_ITLINE_FDCAN2_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN2_IT1) /*!< FDCAN2_IT1 Interrupt */ #endif /* FDCAN1 || FDCAN2 */ #define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt -> exti[23] */ #define HAL_ITLINE_I2C2 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB) /*!< I2C2 Interrupt -> exti[24] */ #if defined (I2C3) #define HAL_ITLINE_I2C3 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C3_GLB) /*!< I2C3 Interrupt -> exti[22] */ #endif /* I2C3 */ #define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */ #define HAL_ITLINE_SPI2 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2) /*!< SPI2 Interrupt */ #if defined (SPI3) #define HAL_ITLINE_SPI3 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI3) /*!< SPI3 Interrupt */ #endif /* SPI3 */ #define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt -> exti[25] */ #define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt -> exti[26] */ #if defined (LPUART2) #define HAL_ITLINE_LPUART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_LPUART2_GLB) /*!< LPUART2 GLB Interrupt -> exti[26] */ #endif /* LPUART2 */ #if defined(USART3) #define HAL_ITLINE_USART3 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB) /*!< USART3 Interrupt .... */ #endif /* USART3 */ #if defined(USART4) #define HAL_ITLINE_USART4 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB) /*!< USART4 Interrupt .... */ #endif /* USART4 */ #if defined (LPUART1) #define HAL_ITLINE_LPUART1 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_LPUART1_GLB) /*!< LPUART1 Interrupt -> exti[28]*/ #endif /* LPUART1 */ #if defined (USART5) #define HAL_ITLINE_USART5 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB) /*!< USART5 Interrupt .... */ #endif /* USART5 */ #if defined (USART6) #define HAL_ITLINE_USART6 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB) /*!< USART6 Interrupt .... */ #endif /* USART6 */ #if defined (CEC) #define HAL_ITLINE_CEC ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC) /*!< CEC Interrupt -> exti[27] */ #endif /* CEC */ #if defined (RNG) #define HAL_ITLINE_RNG ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_RNG) /*!< RNG Interrupt */ #endif /* RNG */ #if defined (AES) #define HAL_ITLINE_AES ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_AES) /*!< AES Interrupt */ #endif /* AES */ /** * @} */ /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup HAL_Exported_Macros HAL Exported Macros * @{ */ /** @defgroup DBG_Exported_Macros DBG Exported Macros * @{ */ /** @brief Freeze and Unfreeze Peripherals in Debug mode */ #if defined(DBG_APB_FZ1_DBG_TIM2_STOP) #define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) #endif /* DBG_APB_FZ1_DBG_TIM2_STOP */ #if defined(DBG_APB_FZ1_DBG_TIM3_STOP) #define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) #endif /* DBG_APB_FZ1_DBG_TIM3_STOP */ #if defined(DBG_APB_FZ1_DBG_TIM4_STOP) #define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) #endif /* DBG_APB_FZ1_DBG_TIM4_STOP */ #if defined(DBG_APB_FZ1_DBG_TIM6_STOP) #define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) #endif /* DBG_APB_FZ1_DBG_TIM6_STOP */ #if defined(DBG_APB_FZ1_DBG_TIM7_STOP) #define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) #endif /* DBG_APB_FZ1_DBG_TIM7_STOP */ #if defined(DBG_APB_FZ1_DBG_RTC_STOP) #define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) #define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) #endif /* DBG_APB_FZ1_DBG_RTC_STOP */ #if defined(DBG_APB_FZ1_DBG_WWDG_STOP) #define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) #define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) #endif /* DBG_APB_FZ1_DBG_WWDG_STOP */ #if defined(DBG_APB_FZ1_DBG_IWDG_STOP) #define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) #define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) #endif /* DBG_APB_FZ1_DBG_IWDG_STOP */ #if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) #define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) #define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) #endif /* DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP */ #if defined(DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) #define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) #define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) #endif /* DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP */ #if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP) #define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) #define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) #endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */ #if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP) #define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) #define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) #endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */ #if defined(DBG_APB_FZ2_DBG_TIM1_STOP) #define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) #endif /* DBG_APB_FZ2_DBG_TIM1_STOP */ #if defined(DBG_APB_FZ2_DBG_TIM14_STOP) #define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) #endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ #if defined(DBG_APB_FZ2_DBG_TIM15_STOP) #define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) #endif /* DBG_APB_FZ2_DBG_TIM15_STOP */ #if defined(DBG_APB_FZ2_DBG_TIM16_STOP) #define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) #endif /* DBG_APB_FZ2_DBG_TIM16_STOP */ #if defined(DBG_APB_FZ2_DBG_TIM17_STOP) #define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) #define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) #endif /* DBG_APB_FZ2_DBG_TIM17_STOP */ /** * @} */ /** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros * @{ */ /** * @brief ISR wrapper check * @note Allow to determine interrupt source per line. */ #define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) /** @brief Main Flash memory mapped at 0x00000000 */ #define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) /** @brief System Flash memory mapped at 0x00000000 */ #define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0) /** @brief Embedded SRAM mapped at 0x00000000 */ #define __HAL_SYSCFG_REMAPMEMORY_SRAM() \ MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0)) /** * @brief Return the boot mode as configured by user. * @retval The boot mode as configured by user. The returned value can be one * of the following values @ref SYSCFG_BootMode */ #define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) /** @brief SYSCFG Break ECC lock. * Enable and lock the connection of Flash ECC error connection to TIM1 Break input. * @note The selected configuration is locked and can be unlocked only by system reset. */ #define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) /** @brief SYSCFG Break Cortex-M0+ Lockup lock. * Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/15/16/17 Break input * @note The selected configuration is locked and can be unlocked only by system reset. */ #define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) #if defined(SYSCFG_CFGR2_PVDL) /** @brief SYSCFG Break PVD lock. * Enables and locks the PVD connection with Timer1/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR register * @note The selected configuration is locked and can be unlocked only by system reset */ #define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) #endif /* SYSCFG_CFGR2_PVDL */ /** @brief SYSCFG Break SRAM PARITY lock * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/15/16/17 * @note The selected configuration is locked and can only be unlocked by system reset */ #define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() SET_BIT(SYSCFG->CFGR2,SYSCFG_CFGR2_SPL) /** @brief Parity check on RAM disable macro * @note Disabling the parity check on RAM locks the configuration bit. * To re-enable the parity check on RAM perform a system reset. */ #define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SPF) /** @brief Set the PEF bit to clear the SRAM Parity Error Flag. */ #define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) /** @brief Fast-mode Plus driving capability enable/disable macros * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO */ #define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ }while(0U) #define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ }while(0U) #if defined(SYSCFG_CDEN_SUPPORT) /** @brief Clamping Diode on specific pins enable/disable macros * @param __PIN__ This parameter can be a combination of values @ref SYSCFG_ClampingDiode */ #define __HAL_SYSCFG_CLAMPINGDIODE_ENABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ SET_BIT(SYSCFG->CFGR2, (__PIN__));\ }while(0U) #define __HAL_SYSCFG_CLAMPINGDIODE_DISABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ CLEAR_BIT(SYSCFG->CFGR2, (__PIN__));\ }while(0U) #endif /* SYSCFG_CDEN_SUPPORT */ /** @brief ISR wrapper check * @note Allow to determine interrupt source per line. */ #define __HAL_SYSCFG_GET_PENDING_IT(__SOURCE__) \ (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFFU)) /** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register * @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL */ #define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\ SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\ }while(0U) #define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U) /** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register * @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL */ #define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\ SET_BIT(SYSCFG->CFGR1,(__SEL__));\ }while(0U) /** * @brief Return the IROut Polarity mode as configured by user. * @retval The IROut polarity as configured by user. The returned value can be one * of @ref HAL_IR_POL_SEL */ #define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL) /** @brief Break input to TIM1/15/16/17 capability enable/disable macros * @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break */ #define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ SET_BIT(SYSCFG->CFGR2, (__BREAK__));\ }while(0U) #define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\ }while(0U) /** * @} */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros * @{ */ #if defined (PWR_PVD_SUPPORT) #define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) #else #define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) #endif /* PWR_PVD_SUPPORT */ #if defined(SYSCFG_CDEN_SUPPORT) #define IS_SYSCFG_CLAMPINGDIODE(__PIN__) ((((__PIN__) & SYSCFG_CDEN_PA1) == SYSCFG_CDEN_PA1) || \ (((__PIN__) & SYSCFG_CDEN_PA3) == SYSCFG_CDEN_PA3) || \ (((__PIN__) & SYSCFG_CDEN_PA5) == SYSCFG_CDEN_PA5) || \ (((__PIN__) & SYSCFG_CDEN_PA6) == SYSCFG_CDEN_PA6) || \ (((__PIN__) & SYSCFG_CDEN_PA13) == SYSCFG_CDEN_PA13) || \ (((__PIN__) & SYSCFG_CDEN_PB0) == SYSCFG_CDEN_PB0) || \ (((__PIN__) & SYSCFG_CDEN_PB1) == SYSCFG_CDEN_PB1) || \ (((__PIN__) & SYSCFG_CDEN_PB2) == SYSCFG_CDEN_PB2)) #endif /* SYSCFG_CDEN_SUPPORT */ #if defined (USART4) #define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4)) #else #define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2)) #endif /* USART4 */ #define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \ ((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED)) #if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) #define IS_SYSCFG_DBATT_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_UCPD1_STROBE) || \ ((__CONFIG__) == SYSCFG_UCPD2_STROBE) || \ ((__CONFIG__) == (SYSCFG_UCPD1_STROBE | SYSCFG_UCPD2_STROBE))) #endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ #if defined(VREFBUF) #define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) #define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) #define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) #endif /* VREFBUF */ #define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) #define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \ ((RMP) == SYSCFG_REMAP_PA12) || \ ((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12))) /** * @} */ /** @defgroup HAL_Private_Macros HAL Private Macros * @{ */ #define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ ((FREQ) == HAL_TICK_FREQ_100HZ) || \ ((FREQ) == HAL_TICK_FREQ_1KHZ)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup HAL_Exported_Functions HAL Exported Functions * @{ */ /** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions * @{ */ /* Initialization and Configuration functions ******************************/ HAL_StatusTypeDef HAL_Init(void); HAL_StatusTypeDef HAL_DeInit(void); void HAL_MspInit(void); void HAL_MspDeInit(void); HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); /** * @} */ /** @defgroup HAL_Exported_Functions_Group2 HAL Control functions * @{ */ /* Peripheral Control functions ************************************************/ void HAL_IncTick(void); void HAL_Delay(uint32_t Delay); uint32_t HAL_GetTick(void); uint32_t HAL_GetTickPrio(void); HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); HAL_TickFreqTypeDef HAL_GetTickFreq(void); void HAL_SuspendTick(void); void HAL_ResumeTick(void); uint32_t HAL_GetHalVersion(void); uint32_t HAL_GetREVID(void); uint32_t HAL_GetDEVID(void); uint32_t HAL_GetUIDw0(void); uint32_t HAL_GetUIDw1(void); uint32_t HAL_GetUIDw2(void); /** * @} */ /** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions * @{ */ /* DBGMCU Peripheral Control functions *****************************************/ void HAL_DBGMCU_EnableDBGStopMode(void); void HAL_DBGMCU_DisableDBGStopMode(void); void HAL_DBGMCU_EnableDBGStandbyMode(void); void HAL_DBGMCU_DisableDBGStandbyMode(void); /** * @} */ /* Exported variables ---------------------------------------------------------*/ /** @addtogroup HAL_Exported_Variables * @{ */ extern __IO uint32_t uwTick; extern uint32_t uwTickPrio; extern HAL_TickFreqTypeDef uwTickFreq; /** * @} */ /** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions * @{ */ /* SYSCFG Control functions ****************************************************/ #if defined(VREFBUF) void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); void HAL_SYSCFG_DisableVREFBUF(void); #endif /* VREFBUF */ void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); void HAL_SYSCFG_EnableRemap(uint32_t PinRemap); void HAL_SYSCFG_DisableRemap(uint32_t PinRemap); #if defined(SYSCFG_CDEN_SUPPORT) void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig); void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig); #endif /* SYSCFG_CDEN_SUPPORT */ #if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery); #endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* STM32G0xx_HAL_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/