meta-rpi: initial commit

Signed-off-by: Thomas Klaehn <tkl@blackfinn.de>

COPYING.MIT

@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

README

@@ -0,0 +1,64 @@
+This README file contains information on the contents of the
+meta-bbb layer.
+
+Please see the corresponding sections below for details.
+
+
+Dependencies
+============
+
+This layer depends on:
+
+  URI: git://git.openembedded.org/bitbake
+  branch: master
+
+  URI: git://git.openembedded.org/openembedded-core
+  layers: meta
+  branch: master
+
+  URI: git://git.yoctoproject.org/xxxx
+  layers: xxxx
+  branch: master
+
+
+Patches
+=======
+
+Please submit any patches against the meta-bbb layer to the
+xxxx mailing list (xxxx@zzzz.org) and cc: the maintainer:
+
+Maintainer: XXX YYYYYY <xxx.yyyyyy@zzzzz.com>
+
+
+Table of Contents
+=================
+
+  I. Adding the meta-bbb layer to your build
+ II. Misc
+
+
+I. Adding the meta-bbb layer to your build
+=================================================
+
+--- replace with specific instructions for the meta-bbb layer ---
+
+In order to use this layer, you need to make the build system aware of
+it.
+
+Assuming the meta-bbb layer exists at the top-level of your
+yocto build tree, you can add it to the build system by adding the
+location of the meta-bbb layer to bblayers.conf, along with any
+other layers needed. e.g.:
+
+  BBLAYERS ?= " \
+    /path/to/yocto/meta \
+    /path/to/yocto/meta-poky \
+    /path/to/yocto/meta-yocto-bsp \
+    /path/to/yocto/meta-meta-bbb \
+    "
+
+
+II. Misc
+========
+
+--- replace with specific information about the meta-bbb layer ---

Readme.md

@@ -0,0 +1,4 @@
+# meta-bbb
+Yocto meta layer to customize the beaglebone black yocto distribution.
+
+

buildconf/bblayers.conf.sample

@@ -0,0 +1,17 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../layers/poky/meta \
+  ${TOPDIR}/../layers/poky/meta-poky \
+  ${TOPDIR}/../layers/poky/meta-yocto-bsp \
+  ${TOPDIR}/../layers/meta-openembedded/meta-oe \
+  ${TOPDIR}/../layers/meta-openembedded/meta-networking \
+  ${TOPDIR}/../layers/meta-openembedded/meta-python \
+  ${TOPDIR}/../layers/meta-raspberrypi \
+  ${TOPDIR}/../layers/meta-rpi \
+  "

buildconf/conf-notes.txt

@@ -0,0 +1,8 @@
+Common targets are:
+    console-image
+    core-image-minimal
+    core-image-sato
+    meta-toolchain
+    adt-installer
+    meta-ide-support
+

buildconf/local.conf.sample

@@ -0,0 +1,46 @@
+MACHINE ?= "raspberrypi3-64"
+
+#DL_DIR ?= "${TOPDIR}/../../downloads"
+#SSTATE_DIR ?= "${TOPDIR}/../../sstate-cache"
+#TMPDIR = "${TOPDIR}/tmp"
+
+DISTRO ?= "poky"
+PACKAGE_CLASSES ?= "package_ipk"
+
+#SDKMACHINE ?= "i686"
+
+#EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#IMAGE_BOOT_FILES_append = " uEnv.txt"
+
+PATCHRESOLVE = "noop"
+
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+CONF_VERSION = "1"
+
+INHERIT += "rm_work"
+
+#INHERIT += "icecc"
+#ICECC_PATH = "/usr/bin/icecc"
+#ICECC_PARALLEL_MAKE = "-j 20"
+
+INHERIT += "own-mirrors"
+SOURCE_MIRROR_URL = "https://files.blackfinn.de/mirror/sources"
+BB_GENERATE_MIRROR_TARBALLS = "1"
+
+export BB_ENV_EXTRAWHITE="$BB_ENV_EXTRAWHITE DL_DIR"

buildconf/rpi-init-build-env

@@ -0,0 +1,33 @@
+# Defaults
+OPT_M=raspberrypi3-64
+BUILD_DIR=build
+
+#
+# MAIN
+#
+OPTIND=1
+shift $((OPTIND-1))
+for NOPTARG in $*; do
+	BUILD_DIR="$NOPTARG"
+done
+
+export TEMPLATECONF="../meta-rpi/buildconf"
+
+export MACHINE=$OPT_M
+rm -f	build/conf/bblayers.conf \
+	build/conf/templateconf.cfg
+
+mkdir -p $BUILD_DIR
+
+if [ ! -h $BUILD_DIR/sync_ipk_up.sh ]; then
+	ln -s ../layers/meta-rpi/tools/scripts/sync_ipk_up.sh $BUILD_DIR/sync_ipk_up.sh
+fi
+
+if [ ! -h $BUILD_DIR/sync_src_up.sh ]; then
+	ln -s ../layers/meta-rpi/tools/scripts/sync_src_up.sh $BUILD_DIR/sync_src_up.sh
+fi
+
+source layers/poky/oe-init-build-env $BUILD_DIR
+
+return 0
+

conf/layer.conf

@@ -0,0 +1,14 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += " \
+	${LAYERDIR}/recipes-*/*/*.bb \
+	${LAYERDIR}/images/*.bb \
+	${LAYERDIR}/recipes-*/*/*.bbappend \
+"
+
+BBFILE_COLLECTIONS += "meta-rpi"
+BBFILE_PATTERN_meta-rpi = "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-rpi = "7"
+

images/console-image.bb

@@ -0,0 +1,96 @@
+SUMMARY = "A console image with some additional tools"
+HOMEPAGE = "https://blackfinn.de"
+LICENSE = "MIT"
+
+inherit core-image extrausers
+
+IMAGE_FEATURES += "package-management"
+
+# Encrypt the password with: echo "<password>" | openssl passwd -1 -stdin
+EXTRA_USERS_PARAMS = " \
+    usermod -p '\$1\$4h5Qdc3i\$Vke4J2Ci5z.D3TtFDmV9r/' root; \
+    useradd -p '\$1\$4h5Qdc3i\$Vke4J2Ci5z.D3TtFDmV9r/' tkl; \
+"
+
+CORE_OS = " \
+    openssh \
+    openssh-keygen \
+    openssh-sftp-server \
+    psplash \
+    tzdata \
+"
+
+KERNEL_EXTRA_INSTALL = " \
+    kernel-modules \
+ "
+
+WIFI_SUPPORT = " \
+    iw \
+    linux-firmware-rtl8192cu \
+    wireless-tools \
+    wpa-supplicant \
+ "
+
+DEV_SDK_INSTALL = " \
+    file \
+    git \
+    make \
+    perl-modules \
+    pkgconfig \
+    python-modules \
+ "
+
+EXTRA_TOOLS_INSTALL = " \
+    acpid \
+    bc \
+    bzip2 \
+    dosfstools \
+    e2fsprogs-mke2fs \
+    ethtool \
+    findutils \
+    htop \
+    i2c-tools \
+    less \
+    mc \
+    procps \
+    rsync \
+    sysfsutils \
+    unzip \
+    util-linux \
+    util-linux-blkid \
+    vim \
+    wget \
+    curl \
+    zip \
+    ntp \
+ "
+
+MQTT = " \
+    python-paho-mqtt \
+"
+
+
+IMAGE_INSTALL += " \
+    ${CORE_OS} \
+    ${DEV_SDK_INSTALL} \
+    ${EXTRA_TOOLS_INSTALL} \
+    ${KERNEL_EXTRA_INSTALL} \
+    ${WIFI_SUPPORT} \
+    ${MQTT} \
+"
+
+set_local_timezone() {
+    ln -sf /usr/share/zoneinfo/Etc/UTC ${IMAGE_ROOTFS}/etc/localtime
+}
+
+disable_bootlogd() {
+    echo BOOTLOGD_ENABLE=no > ${IMAGE_ROOTFS}/etc/default/bootlogd
+}
+
+ROOTFS_POSTPROCESS_COMMAND += " \
+    set_local_timezone ; \
+    disable_bootlogd ; \
+ "
+
+export IMAGE_BASENAME = "console-image"
+

recipes-connectivity/wpa-supplicant/files/wpa_supplicant.conf

@@ -0,0 +1,17 @@
+#create encrypted passphrase with: wpa_passphrase '<ssid>' '<decrypted_key>'
+country=DE                                                               
+ctrl_interface=DIR=/var/run/wpa_supplicant                               
+update_config=1                                                          
+network={                                                                
+        ssid="FRITZ!Box 7330_EXT"                                        
+        psk=6bee2296d336ab07a1aca9f210be55095896e740225d920c0d7f15906dc35846
+        id_str="home_outdoor"                                               
+        priority=1                                                          
+}                                                                           
+network={                                                                   
+        ssid="FRITZ!Box 7330"                                               
+        psk=44df1640e42b8f4e4b424a39af700c817bc2b89f13c324d29c10bf7ba3028258
+        id_str="home_indoor"                                                
+        priority=2                                                          
+}
+

recipes-connectivity/wpa-supplicant/wpa-supplicant_2.6.bbappend

@@ -0,0 +1,6 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+do_install_append () {
+        install -m 0644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}/wpa_supplicant.conf
+}
+

recipes-core/base-files/base-files_3.0.14.bbappend

@@ -0,0 +1,2 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+

recipes-core/base-files/files/motd

@@ -0,0 +1,12 @@
+
+
+______                _                         ______ _ 
+| ___ \              | |                        | ___ (_)
+| |_/ /__ _ ___ _ __ | |__   ___ _ __ _ __ _   _| |_/ /_ 
+|    // _` / __| '_ \| '_ \ / _ \ '__| '__| | | |  __/| |
+| |\ \ (_| \__ \ |_) | |_) |  __/ |  | |  | |_| | |   | |
+\_| \_\__,_|___/ .__/|_.__/ \___|_|  |_|   \__, \_|   |_|
+               | |                          __/ |        
+               |_|                         |___/         
+
+

recipes-core/init-ifupdown-1.0/files/interfaces

@@ -0,0 +1,22 @@
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+# Wireless interface
+allow-hotplug wlan0
+auto wlan0
+iface wlan0 inet dhcp
+        wireless_mode managed
+        wireless_essid any
+        wpa-driver nl80211
+        wpa-conf /etc/wpa_supplicant.conf
+wireless-power off
+
+
+# Wired interface
+auto eth0
+iface eth0 inet dhcp
+
+# Bluetooth networking
+iface bnep0 inet dhcp
+

recipes-core/init-ifupdown-1.0/init-ifupdown_1.0.bbappend

@@ -0,0 +1,2 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+

recipes-devtools/opkg/files/opkg.conf

@@ -0,0 +1,32 @@
+# Must have one or more source entries of the form:
+#
+#   src <src-name> <source-url>
+#
+# and one or more destination entries of the form:
+#
+#   dest <dest-name> <target-path>
+#
+# where <src-name> and <dest-names> are identifiers that
+# should match [a-zA-Z0-9._-]+, <source-url> should be a
+# URL that points to a directory containing a Familiar
+# Packages file, and <target-path> should be a directory
+# that exists on the target system.
+
+# Proxy Support
+#option http_proxy http://proxy.tld:3128
+#option ftp_proxy http://proxy.tld:3128
+#option proxy_username <username>
+#option proxy_password <password>
+
+# Enable GPGME signature
+# option check_signature 1
+
+# Offline mode (for use in constructing flash images offline)
+#option offline_root target
+
+src/gz all https://opkg.blackfinn.de/sumo/all
+src/gz beaglebone https://opkg.blackfinn.de/sumo/raspberrypi3_64
+src/gz cortexa8hf-neon https://opkg.blackfinn.de/sumo/aarch64
+
+# Default destination for installed packages
+dest root /

recipes-devtools/opkg/opkg_0.%.bbappend

@@ -0,0 +1,2 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+

recipes-support/ntp/files/ntp.conf

@@ -0,0 +1,19 @@
+# This is the most basic ntp configuration file
+# The driftfile must remain in a place specific to this
+# machine - it records the machine specific clock error
+driftfile /var/lib/ntp/drift
+# This should be a server that is close (in IP terms)
+# to the machine.  Add other servers as required.
+# Unless you un-comment the line below ntpd will sync
+# only against the local system clock.
+#
+# server time.server.example.com
+server 192.168.178.1
+#
+# Using local hardware clock as fallback
+# Disable this when using ntpd -q -g -x as ntpdate or it will sync to itself
+server 127.127.1.0
+fudge 127.127.1.0 stratum 14
+# Defining a default security setting
+restrict default
+

recipes-support/ntp/ntp_%.bbappend

@@ -0,0 +1,2 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+

tools/scripts/flash_bbb.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# Remove old partitions on emmc.
+dd if=/dev/zero of=/dev/mmcblk1 bs=512 count=1
+
+# Create new partition table.
+echo "n
+p
+1
+
++70M
+a
+t
+c
+n
+p
+
+
+
+w" | fdisk /dev/mmcblk1
+
+# Create file systems.
+mkfs.vfat -F 32 -n "boot" /dev/mmcblk1p1
+yes | mkfs.ext4 -L "rootfs" /dev/mmcblk1p2
+
+
+# Flash boot partition.
+mount /dev/mmcblk1p1 /media
+cp MLO /media
+cp u-boot.img /media
+cp uExt.txt /media
+sync
+umount /dev/mmcblk1p1
+
+# Flash rootfs partition
+mount /dev/mmcblk1p2 /media
+tar -C /media -xf rootfs.tar.bz2
+sync
+umount /dev/mmcblk1p2
+

tools/scripts/sync_ipk_up.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+if [ -n "$1" ]; then
+	rsync -avz -e "ssh -o StrictHostKeyChecking=no" --progress tmp/deploy/ipk/ tkl@e320:/srv/ipk/$1
+else
+	echo "Which branch?"
+	exit -1
+fi
+

tools/scripts/sync_src_up.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+rsync -avz -e "ssh -o StrictHostKeyChecking=no" --progress downloads/ tkl@e320:/srv/files/mirror/sources
+