cc3200/reference
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
master
reference/inc/hw_hib3p3.h

1139 lines
53 KiB
C
Raw Permalink Normal View History

Initial commit
2019-10-09 11:45:38 +00:00
//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_HIB3P3_H__
#define __HW_HIB3P3_H__
//*****************************************************************************
//
// The following are defines for the HIB3P3 register offsets.
//
//*****************************************************************************
#define HIB3P3_O_MEM_HIB_REQ 0x00000000
#define HIB3P3_O_MEM_HIB_RTC_TIMER_ENABLE \
0x00000004
#define HIB3P3_O_MEM_HIB_RTC_TIMER_RESET \
0x00000008
#define HIB3P3_O_MEM_HIB_RTC_TIMER_READ \
0x0000000C
#define HIB3P3_O_MEM_HIB_RTC_TIMER_LSW \
0x00000010
#define HIB3P3_O_MEM_HIB_RTC_TIMER_MSW \
0x00000014
#define HIB3P3_O_MEM_HIB_RTC_WAKE_EN \
0x00000018
#define HIB3P3_O_MEM_HIB_RTC_WAKE_LSW_CONF \
0x0000001C
#define HIB3P3_O_MEM_HIB_RTC_WAKE_MSW_CONF \
0x00000020
#define HIB3P3_O_MEM_INT_OSC_CONF \
0x0000002C
#define HIB3P3_O_MEM_XTAL_OSC_CONF \
0x00000034
#define HIB3P3_O_MEM_BGAP_PARAMETERS0 \
0x00000038
#define HIB3P3_O_MEM_BGAP_PARAMETERS1 \
0x0000003C
#define HIB3P3_O_MEM_HIB_DETECTION_STATUS \
0x00000040
#define HIB3P3_O_MEM_HIB_MISC_CONTROLS \
0x00000044
#define HIB3P3_O_MEM_HIB_CONFIG 0x00000050
#define HIB3P3_O_MEM_HIB_RTC_IRQ_ENABLE \
0x00000054
#define HIB3P3_O_MEM_HIB_RTC_IRQ_LSW_CONF \
0x00000058
#define HIB3P3_O_MEM_HIB_RTC_IRQ_MSW_CONF \
0x0000005C
#define HIB3P3_O_MEM_HIB_UART_CONF \
0x00000400
#define HIB3P3_O_MEM_GPIO_WAKE_EN \
0x00000404
#define HIB3P3_O_MEM_GPIO_WAKE_CONF \
0x00000408
#define HIB3P3_O_MEM_PAD_OEN_RET33_CONF \
0x0000040C
#define HIB3P3_O_MEM_UART_RTS_OEN_RET33_CONF \
0x00000410
#define HIB3P3_O_MEM_JTAG_CONF 0x00000414
#define HIB3P3_O_MEM_HIB_REG0 0x00000418
#define HIB3P3_O_MEM_HIB_REG1 0x0000041C
#define HIB3P3_O_MEM_HIB_REG2 0x00000420
#define HIB3P3_O_MEM_HIB_REG3 0x00000424
#define HIB3P3_O_MEM_HIB_SEQUENCER_CFG0 \
0x0000045C
#define HIB3P3_O_MEM_HIB_SEQUENCER_CFG1 \
0x00000460
#define HIB3P3_O_MEM_HIB_MISC_CONFIG \
0x00000464
#define HIB3P3_O_MEM_HIB_WAKE_STATUS \
0x00000468
#define HIB3P3_O_MEM_HIB_LPDS_GPIO_SEL \
0x0000046C
#define HIB3P3_O_MEM_HIB_SEQUENCER_CFG2 \
0x00000470
#define HIB3P3_O_HIBANA_SPARE_LOWV \
0x00000474
#define HIB3P3_O_HIB_TMUX_CTRL 0x00000478
#define HIB3P3_O_HIB_1P2_1P8_LDO_TRIM \
0x0000047C
#define HIB3P3_O_HIB_COMP_TRIM 0x00000480
#define HIB3P3_O_HIB_EN_TS 0x00000484
#define HIB3P3_O_HIB_1P8V_DET_EN \
0x00000488
#define HIB3P3_O_HIB_VBAT_MON_EN \
0x0000048C
#define HIB3P3_O_HIB_NHIB_ENABLE \
0x00000490
#define HIB3P3_O_HIB_UART_RTS_SW_ENABLE \
0x00000494
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REQ register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REQ_reserved_M \
0xFFFFFE00
#define HIB3P3_MEM_HIB_REQ_reserved_S 9
#define HIB3P3_MEM_HIB_REQ_NU1_M \
0x000001FC
#define HIB3P3_MEM_HIB_REQ_NU1_S 2
#define HIB3P3_MEM_HIB_REQ_mem_hib_clk_disable \
0x00000002 // 1 - Specifies that the Hiberante
// mode is without clocks ; 0 -
// Specified that the Hibernate mode
// is with clocks This register will
// be reset during Hibernate
// -WO-Clks mode (but not during
// Hibernate-W-Clks mode).
#define HIB3P3_MEM_HIB_REQ_mem_hib_req \
0x00000001 // 1 - Request for hibernate mode
// (This is an auto-clear bit) ; 0 -
// Donot request for hibernate mode
// This register will be reset
// during Hibernate -WO-Clks mode
// (but not during Hibernate-W-Clks
// mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_ENABLE register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_ENABLE_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_TIMER_ENABLE_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_TIMER_ENABLE_mem_hib_rtc_timer_enable \
0x00000001 // 1 - Enable the RTC timer to
// start running ; 0 - Keep the RTC
// timer disabled This register will
// be reset during Hibernate
// -WO-Clks mode (but not during
// Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_RESET register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_RESET_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_TIMER_RESET_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_TIMER_RESET_mem_hib_rtc_timer_reset \
0x00000001 // 1 - Reset the RTC timer ; 0 -
// Donot reset the RTC timer. This
// is an auto-clear bit. This
// register will be reset during
// Hibernate -WO-Clks mode (but not
// during Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_READ register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_READ_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_TIMER_READ_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_TIMER_READ_mem_hib_rtc_timer_read \
0x00000001 // 1 - Latch the running RTC timer
// into local registers. After
// programming this bit to 1, the
// F/w can read the latched RTC
// timer values from
// MEM_HIB_RTC_TIMER_LSW and
// MEM_HIB_RTC_TIMER_MSW. Before the
// F/w (APPS or NWP) wants to read
// the RTC-Timer, it has to program
// this bit to 1, then only read the
// MSW and LSW values. This is an
// auto-clear bit. This register
// will be reset during Hibernate
// -WO-Clks mode (but not during
// Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_LSW register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_LSW_hib_rtc_timer_lsw_M \
0xFFFFFFFF // Lower 32b value of the latched
// RTC-Timer.
#define HIB3P3_MEM_HIB_RTC_TIMER_LSW_hib_rtc_timer_lsw_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_MSW register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_reserved_S 16
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_hib_rtc_timer_msw_M \
0x0000FFFF // Upper 32b value of the latched
// RTC-Timer.
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_hib_rtc_timer_msw_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_WAKE_EN register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_WAKE_EN_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_WAKE_EN_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_WAKE_EN_mem_hib_rtc_wake_en \
0x00000001 // 1 - Enable the RTC timer based
// wakeup during Hibernate mode ; 0
// - Disable the RTC timer based
// wakeup during Hibernate mode This
// register will be reset during
// Hibernate-WO-Clks mode (but not
// during Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_WAKE_LSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_WAKE_LSW_CONF_mem_hib_rtc_wake_lsw_conf_M \
0xFFFFFFFF // Configuration for RTC-Timer
// Wakeup (Lower 32b word)
#define HIB3P3_MEM_HIB_RTC_WAKE_LSW_CONF_mem_hib_rtc_wake_lsw_conf_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_WAKE_MSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_reserved_S 16
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_mem_hib_rtc_wake_msw_conf_M \
0x0000FFFF // Configuration for RTC-Timer
// Wakeup (Upper 16b word)
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_mem_hib_rtc_wake_msw_conf_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_INT_OSC_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_INT_OSC_CONF_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_INT_OSC_CONF_reserved_S 16
#define HIB3P3_MEM_INT_OSC_CONF_cm_clk_good_32k_int \
0x00008000 // 1 - Internal 32kHz Oscillator is
// valid ; 0 - Internal 32k
// oscillator clk is not valid
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_spare_M \
0x00007E00
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_spare_S 9
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_en_intosc_32k_override_ctrl \
0x00000100 // When 1, the INT_32K_OSC_EN comes
// from bit [0] of this register,
// else comes from the FSM. This
// register will be reset during
// Hibernate-WO-Clks mode (but not
// during Hibernate-W-Clks mode)
#define HIB3P3_MEM_INT_OSC_CONF_NU1 \
0x00000080
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_trim_M \
0x0000007E
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_trim_S 1
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_en_intosc_32k \
0x00000001 // Override value for INT_OSC_EN.
// Applicable only when bit [3] of
// this register is set to 1.
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_XTAL_OSC_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_XTAL_OSC_CONF_reserved_M \
0xFFF00000
#define HIB3P3_MEM_XTAL_OSC_CONF_reserved_S 20
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_sli_32k_override_ctrl \
0x00080000 // When 1, the SLICER_EN comes from
// bit [10] of this register, else
// comes from the FSM.
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_xtal_32k_override_ctrl \
0x00040000 // When 1, the XTAL_EN comes from
// bit [0] of this register, else
// comes from the FSM.
#define HIB3P3_MEM_XTAL_OSC_CONF_cm_clk_good_xtal \
0x00020000 // 1 - XTAL Clk is good ; 0 - XTAL
// Clk is yet to be valid.
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_xtal_trim_M \
0x0001F800
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_xtal_trim_S 11
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_sli_32k \
0x00000400 // SLICER_EN Override value :
// Applicable only when bit [19] of
// this register is set to 1.
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_sli_32k_trim_M \
0x00000380
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_sli_32k_trim_S 7
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_fref_32k_slicer_itrim_M \
0x00000070
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_fref_32k_slicer_itrim_S 4
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_fref_32k_slicer \
0x00000008
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_input_sense_M \
0x00000006
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_input_sense_S 1
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_xtal_32k \
0x00000001 // XTAL_EN Override value :
// Applicable only when bit [18] of
// this register is set to 1.
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_BGAP_PARAMETERS0 register.
//
//******************************************************************************
#define HIB3P3_MEM_BGAP_PARAMETERS0_reserved_M \
0xFFF80000
#define HIB3P3_MEM_BGAP_PARAMETERS0_reserved_S 19
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_en_seq \
0x00040000
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_vbok4bg_comp_trim_M \
0x0001C000
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_vbok4bg_comp_trim_S 14
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_en_vbat_ok_4bg \
0x00001000
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_en_vbok4bg_comp \
0x00000800
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_en_vbok4bg_comp_ref \
0x00000400
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_spare_M \
0x000003FF
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_spare_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_BGAP_PARAMETERS1 register.
//
//******************************************************************************
#define HIB3P3_MEM_BGAP_PARAMETERS1_reserved_M \
0xE0000000
#define HIB3P3_MEM_BGAP_PARAMETERS1_reserved_S 29
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_act_iref_itrim_M \
0x1F000000
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_act_iref_itrim_S 24
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en_act_iref \
0x00000008
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en_v2i \
0x00000004
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en_cap_sw \
0x00000002
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_DETECTION_STATUS register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_DETECTION_STATUS_reserved_M \
0xFFFFFF80
#define HIB3P3_MEM_HIB_DETECTION_STATUS_reserved_S 7
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_forced_ana_status \
0x00000040 // 1 - 1.8 V supply forced mode.
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_forced_flash_status \
0x00000004 // 1 - 3.3 V supply forced mode for
// Flash supply
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_ext_clk_det_out_status \
0x00000002 // 1 - Forced clock mode
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_xtal_det_out_status \
0x00000001 // 1 - XTAL clock mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_MISC_CONTROLS register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_MISC_CONTROLS_reserved_M \
0xFFFFF800
#define HIB3P3_MEM_HIB_MISC_CONTROLS_reserved_S 11
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_en_pok_por_comp \
0x00000400
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_en_pok_por_comp_ref \
0x00000200
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_pok_por_comp_trim_M \
0x000001C0
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_pok_por_comp_trim_S 6
#define HIB3P3_MEM_HIB_MISC_CONTROLS_NU1 \
0x00000020
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_flash_det_en \
0x00000010
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_en_tmux \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_CONFIG register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_CONFIG_TOP_MUX_CTRL_SOP_SPIO_M \
0xFF000000
#define HIB3P3_MEM_HIB_CONFIG_TOP_MUX_CTRL_SOP_SPIO_S 24
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED3 \
0x00080000 // 1 - Enable VDD_FLASH_INDP_PAD
// for digital path (SHARED4) ; 0 -
// Disable VDD_FLASH_INDP_PAD for
// digital path (SHARED4) ; Before
// programming this bit to 1, ensure
// that the device is in FORCED 3.3
// supply Mode, which can be
// inferred from the register :
// MEM_HIB_DETECTION_STATUS : 0x0040
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED2 \
0x00040000 // 1 - Enable the
// VDD_FB_GPIO_MUX_PAD for digital
// path (SHARED3) ; 0 - Disable the
// VDD_FB_GPIO_MUX_PAD for digital
// path (SHARED3) ; This pin can be
// used only in modes other than
// SOP("111")
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED1 \
0x00020000 // 1 - Enable the PM_TEST_PAD for
// digital GPIO path (SHARED2) ; 0 -
// Disable the PM_TEST_PAD for
// digital GPIO path (SHARED2) This
// pin can be used for digital only
// in modes other then SOP-111
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED0 \
0x00010000 // 1 - Enable the XTAL_N pin
// digital GPIO path (SHARED1); 0 -
// Disable the XTAL_N pin digital
// GPIO path (SHARED1). Before
// programming this bit to 1, ensure
// that the device is in FORCED CLK
// Mode, which can inferred from the
// register :
// MEM_HIB_DETECTION_STATUS :
// 0x0040.
#define HIB3P3_MEM_HIB_CONFIG_mem_hib_xtal_enable \
0x00000100 // 1 - Enable the XTAL Clock ; 0 -
// Donot enable the XTAL Clock. This
// bit has to be programmed to 1 (by
// APPS Devinit F/w), during exit
// from OFF or Hib_wo_clks modes,
// after checking if the slow_clk
// mode is XTAL_CLK mode. Once
// enabled the XTAL will be disabled
// only after entering HIB_WO_CLKS
// mode. This register will be reset
// during Hibernate -WO-Clks mode
// (but not during Hibernate-W-Clks
// mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_IRQ_ENABLE register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_IRQ_ENABLE_HIB_RTC_IRQ_ENABLE \
0x00000001 // 1 - Enable the HIB RTC - IRQ ; 0
// - Disable the HIB RTC - IRQ
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_IRQ_LSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_IRQ_LSW_CONF_HIB_RTC_IRQ_LSW_CONF_M \
0xFFFFFFFF // Configuration for LSW of the
// RTC-Timestamp at which interrupt
// need to be generated
#define HIB3P3_MEM_HIB_RTC_IRQ_LSW_CONF_HIB_RTC_IRQ_LSW_CONF_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_IRQ_MSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_IRQ_MSW_CONF_HIB_RTC_IRQ_MSW_CONF_M \
0x0000FFFF // Configuration for MSW of thr
// RTC-Timestamp at which the
// interrupt need to be generated
#define HIB3P3_MEM_HIB_RTC_IRQ_MSW_CONF_HIB_RTC_IRQ_MSW_CONF_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_UART_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_UART_CONF_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_UART_CONF_reserved_S 1
#define HIB3P3_MEM_HIB_UART_CONF_mem_hib_uart_wake_en \
0x00000001 // 1 - Enable the UART-Autonomous
// mode wakeup during Hibernate mode
// ; This is an auto-clear bit, once
// programmed to 1, it will latched
// into an internal register which
// remain asserted until the
// Hib-wakeup is initiated.
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_GPIO_WAKE_EN register.
//
//******************************************************************************
#define HIB3P3_MEM_GPIO_WAKE_EN_reserved_M \
0xFFFFFF00
#define HIB3P3_MEM_GPIO_WAKE_EN_reserved_S 8
#define HIB3P3_MEM_GPIO_WAKE_EN_mem_gpio_wake_en_M \
0x000000FF // 1 - Enable the GPIO-Autonomous
// mode wakeup during Hibernate mode
// ; This is an auto-clear bit, once
// programmed to 1, it will latched
// into an internal register which
// remain asserted until the
// Hib-wakeup is initiated.
#define HIB3P3_MEM_GPIO_WAKE_EN_mem_gpio_wake_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_GPIO_WAKE_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_GPIO_WAKE_CONF_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_GPIO_WAKE_CONF_reserved_S 16
#define HIB3P3_MEM_GPIO_WAKE_CONF_mem_gpio_wake_conf_M \
0x0000FFFF // Configuration to say whether the
// GPIO wakeup has to happen on
// Level0 or falling-edge for the
// given group. “00” – Level0 “01” –
// Level1 “10”- Fall-edge “11”-
// Rise-edge [1:0] – Conf for GPIO0
// [3:2] – Conf for GPIO1 [5:4] –
// Conf for GPIO2 [7:6] – Conf for
// GPIO3 [9:8] – Conf for GPIO4
// [11:10] – Conf for GPIO5 [13:12]
// – Conf for GPIO6
#define HIB3P3_MEM_GPIO_WAKE_CONF_mem_gpio_wake_conf_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_PAD_OEN_RET33_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_PAD_OEN_RET33_CONF_mem_pad_oen_ret33_override_ctrl \
0x00000004 // 1 - Override the OEN33 and RET33
// controls of GPIOs during
// SOP-Bootdebug mode ; 0 - Donot
// override the OEN33 and RET33
// controls of GPIOs during
// SOP-Bootdebug mode
#define HIB3P3_MEM_PAD_OEN_RET33_CONF_PAD_OEN33_CONF \
0x00000002
#define HIB3P3_MEM_PAD_OEN_RET33_CONF_PAD_RET33_CONF \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_UART_RTS_OEN_RET33_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_UART_RTS_OEN_RET33_CONF_mem_uart_nrts_oen_ret33_override_ctrl \
0x00000004 // 1 - Override the OEN33 and RET33
// controls of UART NRTS GPIO during
// SOP-Bootdebug mode ; 0 - Donot
// override the OEN33 and RET33
// controls of UART NRTS GPIO during
// SOP-Bootdebug mode
#define HIB3P3_MEM_UART_RTS_OEN_RET33_CONF_PAD_UART_RTS_OEN33_CONF \
0x00000002
#define HIB3P3_MEM_UART_RTS_OEN_RET33_CONF_PAD_UART_RTS_RET33_CONF \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_JTAG_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_JTAG_CONF_mem_jtag1_oen_ret33_override_ctrl \
0x00000200
#define HIB3P3_MEM_JTAG_CONF_mem_jtag0_oen_ret33_override_ctrl \
0x00000100
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG1_RTS_OEN33_CONF \
0x00000008
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG1_RTS_RET33_CONF \
0x00000004
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG0_RTS_OEN33_CONF \
0x00000002
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG0_RTS_RET33_CONF \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG0 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG0_mem_hib_reg0_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG0_mem_hib_reg0_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG1 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG1_mem_hib_reg1_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG1_mem_hib_reg1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG2 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG2_mem_hib_reg2_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG2_mem_hib_reg2_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG3 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG3_mem_hib_reg3_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG3_mem_hib_reg3_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_SEQUENCER_CFG0 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev0_to_ev1_time_M \
0xFFFF0000 // Configuration for the number of
// slow-clks between de-assertion of
// EN_BG_3P3V to assertion of
// EN_BG_3P3V
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev0_to_ev1_time_S 16
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_NU1 \
0x00008000
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev3_to_ev4_time_M \
0x00006000 // Configuration for the number of
// slow-clks between assertion of
// EN_COMP_3P3V and assertion of
// EN_COMP_LATCH_3P3V
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev3_to_ev4_time_S 13
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev2_to_ev3_time_M \
0x00001800 // Configuration for the number of
// slow-clks between assertion of
// (EN_CAP_SW_3P3V,EN_COMP_REF) and
// assertion of (EN_COMP_3P3V)
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev2_to_ev3_time_S 11
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev1_to_ev2_time_M \
0x00000600 // Configuration for the number of
// slow-clks between assertion of
// (EN_BG_3P3V) and assertion of
// (EN_CAP_SW_3P3V,
// EN_COMP_REF_3P3V)
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev1_to_ev2_time_S 9
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_crude_ref_comp \
0x00000100
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_vbok4bg_ref_override_ctrl \
0x00000080 // 1 - EN_VBOK4BG_REF comes from
// bit[10] of the register
// MEM_BGAP_PARAMETERS0 [0x0038]. 0
// - EN_VBOK4BG_REF comes directly
// from the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_vbok4bg_comp_override_ctrl \
0x00000040 // 1 - EN_VBOK4BG comes from
// bit[11] of the register
// MEM_BGAP_PARAMETERS0 [0x0038]. 0
// - EN_VBOK4BG comes directly from
// the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_v2i_override_ctrl \
0x00000020 // 1 - EN_V2I comes from bit[2] of
// the register MEM_BGAP_PARAMETERS1
// [0x003C]. 0 - EN_V2I comes
// directly from the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_por_comp_ref_override_ctrl \
0x00000010 // 1 - EN_POR_COMP_REF comes from
// bit[9] of the register
// MEM_HIB_MISC_CONTROLS [0x0044]. 0
// - EN_POR_COMP_REF comes directly
// from the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_por_comp_override_ctrl \
0x00000008 // 1 - EN_POR_COMP comes from
// bit[10] of the register
// MEM_HIB_MISC_CONTROLS [0x044]. 0
// - EN_POR_COMP comes directly from
// the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_cap_sw_override_ctrl \
0x00000004 // 1 - EN_CAP_SW comes from bit[1]
// of the register
// MEM_BGAP_PARAMETERS1 [0x003C]. 0
// - EN_CAP_SW comes directly from
// Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bg_override_ctrl \
0x00000002 // 1 - EN_BGAP comes from bit[0] of
// the register MEM_BGAP_PARAMETERS1
// [0x003C]. 0 - EN_BGAP comes
// directly from Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_act_iref_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_SEQUENCER_CFG1 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_reserved_S 16
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_ev5_to_ev6_time_M \
0x0000C000 // Configuration for number of
// slow-clks between de-assertion of
// EN_COMP_LATCH and assertion of
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_ev5_to_ev6_time_S 14
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev1_to_ev2_time_M \
0x00003000 // Configuration for number of
// slow-clks between assertion of
// EN_COMP_REF to assertion of
// EN_COMP during HIB-Exit
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev1_to_ev2_time_S 12
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_ev1_time_M \
0x00000C00 // TBD
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_ev1_time_S 10
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_active_M \
0x00000300 // Configuration in number of
// slow-clks between assertion of
// (EN_BGAP_3P3V, EN_CAP_SW_3P3V,
// EN_ACT_IREF_3P3V, EN_COMP_REF) to
// assertion of EN_COMP_3P3V
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_active_S 8
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_active_to_bdc_ev1_to_bdc_ev0_time_M \
0x000000C0 // Configuration in number of
// slow-clks between de-assertion of
// (EN_COMP_3P3V, EN_COMP_REF_3P3V,
// EN_ACT_IREF_3P3V, EN_CAP_SW_3P3V)
// to deassertion of EN_BGAP_3P3V.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_active_to_bdc_ev1_to_bdc_ev0_time_S 6
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_NU1_M \
0x0000003F
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_NU1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_MISC_CONFIG register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_MISC_CONFIG_mem_en_pll_untrim_current \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_WAKE_STATUS register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_WAKE_STATUS_hib_wake_src_M \
0x0000001E // "0100" - GPIO ; "0010" - RTC ;
// "0001" - UART Others - Reserved
#define HIB3P3_MEM_HIB_WAKE_STATUS_hib_wake_src_S 1
#define HIB3P3_MEM_HIB_WAKE_STATUS_hib_wake_status \
0x00000001 // 1 - Wake from Hibernate ; 0 -
// Wake from OFF
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_LPDS_GPIO_SEL register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_LPDS_GPIO_SEL_HIB_LPDS_GPIO_SEL_M \
0x00000007
#define HIB3P3_MEM_HIB_LPDS_GPIO_SEL_HIB_LPDS_GPIO_SEL_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_SEQUENCER_CFG2 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_reserved_M \
0xFFFFF800
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_reserved_S 11
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_active_to_bdc_ev0_to_active_to_bdc_ev1_time_M \
0x00000600 // Deassertion of EN_COMP_LATCH_3P3
// to deassertion of (EN_COMP_3P3,
// EN_COMP_REF_3P3, EN_ACT_IREF_3P3,
// EN_CAP_SW_3P3)
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_active_to_bdc_ev0_to_active_to_bdc_ev1_time_S 9
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev4_to_ev5_time_M \
0x000001C0 // Assertion of EN_COMP_LATCH_3P3
// to deassertion of
// EN_COMP_LATCH_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev4_to_ev5_time_S 6
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev6_to_ev7_time_M \
0x00000030 // Deassertion of (EN_CAP_SW_3P3,
// EN_COMP_REF_3P3, EN_COMP_3P3,
// EN_COMP_OUT_LATCH_3P3) to
// deassertion of EN_BGAP_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev6_to_ev7_time_S 4
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_to_active_ev1_to_ev2_time_M \
0x0000000C // Assertion of EN_COMP_3P3 to
// assertion of EN_COMPOUT_LATCH_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_to_active_ev1_to_ev2_time_S 2
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_hib_to_active_ev2_to_ev3_time_M \
0x00000003 // Assertion of EN_COMP_3P3 to
// assertion of EN_COMPOUT_LATCH_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_hib_to_active_ev2_to_ev3_time_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIBANA_SPARE_LOWV register.
//
//******************************************************************************
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare1_M \
0xFFC00000
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare1_S 22
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare0_M \
0x0001FFFF
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare0_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_TMUX_CTRL register.
//
//******************************************************************************
#define HIB3P3_HIB_TMUX_CTRL_reserved_M \
0xFFFFFC00
#define HIB3P3_HIB_TMUX_CTRL_reserved_S 10
#define HIB3P3_HIB_TMUX_CTRL_mem_hd_tmux_cntrl_M \
0x000003FF
#define HIB3P3_HIB_TMUX_CTRL_mem_hd_tmux_cntrl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_1P2_1P8_LDO_TRIM register.
//
//******************************************************************************
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_reserved_M \
0xFFFFF000
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_reserved_S 12
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_en_override_ctrl \
0x00000800
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_en_override_ctrl \
0x00000400
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_en_override \
0x00000200
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_en_override \
0x00000100
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_vtrim_M \
0x000000F0
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_vtrim_S 4
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_vtrim_M \
0x0000000F
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_vtrim_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_COMP_TRIM register.
//
//******************************************************************************
#define HIB3P3_HIB_COMP_TRIM_reserved_M \
0xFFFFFFF8
#define HIB3P3_HIB_COMP_TRIM_reserved_S 3
#define HIB3P3_HIB_COMP_TRIM_mem_hd_comp_trim_M \
0x00000007
#define HIB3P3_HIB_COMP_TRIM_mem_hd_comp_trim_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_EN_TS register.
//
//******************************************************************************
#define HIB3P3_HIB_EN_TS_reserved_M \
0xFFFFFFFE
#define HIB3P3_HIB_EN_TS_reserved_S 1
#define HIB3P3_HIB_EN_TS_mem_hd_en_ts \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_1P8V_DET_EN register.
//
//******************************************************************************
#define HIB3P3_HIB_1P8V_DET_EN_reserved_M \
0xFFFFFFFE
#define HIB3P3_HIB_1P8V_DET_EN_reserved_S 1
#define HIB3P3_HIB_1P8V_DET_EN_mem_hib_1p8v_det_en \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_VBAT_MON_EN register.
//
//******************************************************************************
#define HIB3P3_HIB_VBAT_MON_EN_reserved_M \
0xFFFFFFFC
#define HIB3P3_HIB_VBAT_MON_EN_reserved_S 2
#define HIB3P3_HIB_VBAT_MON_EN_mem_hib_vbat_mon_del_en \
0x00000002
#define HIB3P3_HIB_VBAT_MON_EN_mem_hib_vbat_mon_en \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_NHIB_ENABLE register.
//
//******************************************************************************
#define HIB3P3_HIB_NHIB_ENABLE_mem_hib_nhib_enable \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_UART_RTS_SW_ENABLE register.
//
//******************************************************************************
#define HIB3P3_HIB_UART_RTS_SW_ENABLE_mem_hib_uart_rts_sw_enable \
0x00000001
#endif // __HW_HIB3P3_H__
Reference in New Issue Copy Permalink