reference/inc/hw_ints.h
2019-10-09 13:45:38 +02:00

118 lines
5.7 KiB
C

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
//*****************************************************************************
//
// hw_ints.h - Macros that define the interrupt assignment on CC3200.
//
//*****************************************************************************
#ifndef __HW_INTS_H__
#define __HW_INTS_H__
//*****************************************************************************
//
// The following are defines for the fault assignments.
//
//*****************************************************************************
#define FAULT_NMI 2 // NMI fault
#define FAULT_HARD 3 // Hard fault
#define FAULT_MPU 4 // MPU fault
#define FAULT_BUS 5 // Bus fault
#define FAULT_USAGE 6 // Usage fault
#define FAULT_SVCALL 11 // SVCall
#define FAULT_DEBUG 12 // Debug monitor
#define FAULT_PENDSV 14 // PendSV
#define FAULT_SYSTICK 15 // System Tick
//*****************************************************************************
//
// The following are defines for the interrupt assignments.
//
//*****************************************************************************
#define INT_GPIOA0 16 // GPIO Port S0
#define INT_GPIOA1 17 // GPIO Port S1
#define INT_GPIOA2 18 // GPIO Port S2
#define INT_GPIOA3 19 // GPIO Port S3
#define INT_UARTA0 21 // UART0 Rx and Tx
#define INT_UARTA1 22 // UART1 Rx and Tx
#define INT_I2CA0 24 // I2C controller
#define INT_ADCCH0 30 // ADC Sequence 0
#define INT_ADCCH1 31 // ADC Sequence 1
#define INT_ADCCH2 32 // ADC Sequence 2
#define INT_ADCCH3 33 // ADC Sequence 3
#define INT_WDT 34 // Watchdog Timer0
#define INT_TIMERA0A 35 // Timer 0 subtimer A
#define INT_TIMERA0B 36 // Timer 0 subtimer B
#define INT_TIMERA1A 37 // Timer 1 subtimer A
#define INT_TIMERA1B 38 // Timer 1 subtimer B
#define INT_TIMERA2A 39 // Timer 2 subtimer A
#define INT_TIMERA2B 40 // Timer 2 subtimer B
#define INT_FLASH 45 // FLASH Control
#define INT_TIMERA3A 51 // Timer 3 subtimer A
#define INT_TIMERA3B 52 // Timer 3 subtimer B
#define INT_UDMA 62 // uDMA controller
#define INT_UDMAERR 63 // uDMA Error
#define INT_SHA 164 // SHA
#define INT_AES 167 // AES
#define INT_DES 169 // DES
#define INT_MMCHS 175 // SDIO
#define INT_I2S 177 // McAPS
#define INT_CAMERA 179 // Camera
#define INT_NWPIC 187 // Interprocessor communication
#define INT_PRCM 188 // Power, Reset and Clock Module
#define INT_SSPI 191 // Shared SPI
#define INT_GSPI 192 // Generic SPI
#define INT_LSPI 193 // Link SPI
//*****************************************************************************
//
// The following are defines for the total number of interrupts.
//
//*****************************************************************************
#define NUM_INTERRUPTS 195 //The above number plus 2?
//*****************************************************************************
//
// The following are defines for the total number of priority levels.
//
//*****************************************************************************
#define NUM_PRIORITY 8
#define NUM_PRIORITY_BITS 3
#endif // __HW_INTS_H__