Implement uart bridge application

Core/main.cc

@@ -5,152 +5,25 @@
 #include "delay.h"
 #include "platform/stm32g0xx/Gpio.h"
 #include "platform/stm32g0xx/Uart.h"
-#include "platform/stm32g0xx/IndependentWatchdog.h"
 
-// NOTE! The independent watchdog is clocked by a separate clock. this one
-//       isn't controlled by JTAG. That's why the independent watchdog needs to
-//       be disabled during JTAG debug sessions.
-#define JTAG_DEBUG
 
 using namespace perinet::platform::stm32g0xx;
 
-Gpio green_led(Gpio::Port::PORT_C, 6, Gpio::Mode::MODE_OUTPUT_PP);
 Uart uart1(Uart::UartDevice::UART_1, 115200);
 Uart uart2(Uart::UartDevice::UART_2, 115200);
 
-#ifndef JTAG_DEBUG
-IndependentWatchdog watchdog(4095, 4095);
-#endif
-
 int main(void)
 {
-    unsigned int i = 1, j = 40;
+    char tx_buf[] = "\r\rProgram: UART bridge\r\n\n Receive on uart2 and transmit it on uart 1\r\n";
-    char tx_buf[80];
+    uint8_t rec;
-
-#ifndef JTAG_DEBUG
-    watchdog.enable();
-#endif
-
-    while (1) {
-        if (j < 100) {
-            j += 10;
-        }
-        else if (j < 200) {
-            j += 20;
-        }
-        else if (j < 400) {
-            j += 40;
-        }
-        if (j > 800) {
-            j = 800;
-        }
-        sprintf(tx_buf, "%u: Hello World\r\n", i++);
         uart1.sync_send((const uint8_t *)tx_buf, strlen(tx_buf));
-        uart2.sync_send((const uint8_t *)tx_buf, strlen(tx_buf));
-        green_led.toggle();
-        delay_ms(j);
 
-#ifndef JTAG_DEBUG
+    while(true) {
-        watchdog.trigger();
+        if(uart2.sync_receive(&rec)) {
-#endif
+            uart1.sync_send(&rec, 1);
+        }
+        if(uart1.sync_receive(&rec)) {
+            uart2.sync_send(&rec, 1);
+        }
     }
-#if 0
-// 1:
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  //HAL_Init();
-
-    /* Configure Flash prefetch, Instruction cache             */
-    /* Default configuration at reset is:                      */
-    /* - Prefetch disabled                                     */
-    /* - Instruction cache enabled                             */
-
-#if (INSTRUCTION_CACHE_ENABLE == 0U)
-    __HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
-#endif /* INSTRUCTION_CACHE_ENABLE */
-
-#if (PREFETCH_ENABLE != 0U)
-    __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
-#endif /* PREFETCH_ENABLE */
-
-    /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is HSI) */
-    HAL_InitTick(TICK_INT_PRIORITY);
-
-    PWR_PVDTypeDef sConfigPVD = {0};
-
-    __HAL_RCC_SYSCFG_CLK_ENABLE();
-    __HAL_RCC_PWR_CLK_ENABLE();
-
-    /* System interrupt init*/
-
-    /** PVD Configuration*/
-    sConfigPVD.Mode = PWR_PVD_MODE_NORMAL;
-    HAL_PWR_ConfigPVD(&sConfigPVD);
-    /** Enable the PVD Output*/
-    HAL_PWR_EnablePVD();
-
-// 2:
-  /* Configure the system clock */
-  //SystemClock_Config();
-
-// 3:
-  /* Initialize all configured peripherals */
-  //MX_GPIO_Init();
-
-// 4:
-  //MX_DMA_Init();
-    /* DMA controller clock enable */
-    __HAL_RCC_DMA1_CLK_ENABLE();
-
-    /* DMA interrupt init */
-    /* DMA1_Channel1_IRQn interrupt configuration */
-    HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
-    HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
-    /* DMA1_Channel2_3_IRQn interrupt configuration */
-    HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 0, 0);
-    HAL_NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);
-
-// 5:
-  //MX_USART1_UART_Init();
-    huart1.Instance = USART1;
-    huart1.Init.BaudRate = 115200;
-    huart1.Init.WordLength = UART_WORDLENGTH_8B;
-    huart1.Init.StopBits = UART_STOPBITS_1;
-    huart1.Init.Parity = UART_PARITY_NONE;
-    huart1.Init.Mode = UART_MODE_TX_RX;
-    huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-    huart1.Init.OverSampling = UART_OVERSAMPLING_16;
-    huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
-    huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;
-    huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
-    if (HAL_UART_Init(&huart1) != HAL_OK)
-    {
-        Error_Handler();
-    }
-    if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
-    {
-        Error_Handler();
-    }
-    if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
-    {
-        Error_Handler();
-    }
-    if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK)
-    {
-        Error_Handler();
-    }
-
-//6:
-  //uint8_t buf[] = "Hello World\r\n";
-  //HAL_UART_Transmit_DMA(&huart1, buf, strlen((const char *)buf));
-  //HAL_UART_Receive_DMA(&huart1, buf, strlen((const char *)buf));
-
-#endif
 }
-
-#ifdef  USE_FULL_ASSERT
-void assert_failed(uint8_t *file, uint32_t line)
-{
-    /* User can add his own implementation to report the file name and line number,
-       ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-}
-#endif /* USE_FULL_ASSERT */

platform/stm32g0xx/Uart.cc

@@ -72,3 +72,13 @@ void Uart::sync_send(const uint8_t *buffer, uint32_t len)
         uart->TDR = buffer[i];
     }
 }
+
+bool Uart::sync_receive(uint8_t* res)
+{
+        if((uart->ISR & USART_ISR_RXNE_RXFNE) == 0) {
+            return false;
+        }
+
+        *res = (uint8_t)(uart->RDR);
+        return true;
+}

platform/stm32g0xx/Uart.h

@@ -18,6 +18,7 @@ public:
 
     Uart(UartDevice, uint32_t);
     void sync_send(const uint8_t *, uint32_t);
+    bool sync_receive(uint8_t*);
 
 private:
     USART_TypeDef   * uart;