tkl/stm32g0xx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

code refactoring

Browse Source
This commit is contained in:
Thomas Klaehn 2021-01-08 11:58:59 +01:00
parent 3c65600e31
commit 38095715e9
57 changed files with 238 additions and 58077 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Core/delay.h Normal file
View File

@ -0,0 +1,8 @@
#ifndef __CORE_DELAY_H__
#define __CORE_DELAY_H__
#include <stdint.h>
void delay_ms(uint32_t);
#endif

101
Core/main.cc
View File

@ -1,18 +1,12 @@
#include <string.h>
#include <stdint.h>
#include <stdio.h>
#include <stdbool.h>
#include "main.h"
#include <cstring>
#include <cstdint>
#include <cstdio>
#include "delay.h"
#include "platform/stm32g0xx/Gpio.h"
#include "platform/stm32g0xx/Uart.h"
#include "platform/stm32g0xx/IndependentWatchdog.h"
static void SystemClock_Config(void);
#define SYS_TICK_PRIO 0
// NOTE! The independent watchdog is clocked by a separate clock. this one
// isn't controlled by JTAG. That's why the independent watchdog needs to
// be disabled during JTAG debug sessions.
@ -30,24 +24,6 @@ IndependentWatchdog watchdog(4095, 4095);
int main(void)
{
unsigned int i = 1, j = 40;
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
SysTick_Config(SystemCoreClock / 1000U); // 1kHz
NVIC_SetPriority(SysTick_IRQn, SYS_TICK_PRIO);
SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN);
SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN);
/* Change strobe configuration of GPIO depending on UCPDx dead battery settings */
MODIFY_REG(SYSCFG->CFGR1, (SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE), SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE);
SystemClock_Config();
char tx_buf[80];
#ifndef JTAG_DEBUG
@ -70,7 +46,7 @@ int main(void)
sprintf(tx_buf, "%u: Hello World\r\n", i++);
uart.sync_send((const uint8_t *)tx_buf, strlen(tx_buf));
green_led.toggle();
HAL_Delay(j);
delay_ms(j);
#ifndef JTAG_DEBUG
watchdog.trigger();
@ -78,73 +54,6 @@ int main(void)
}
}
void SystemClock_Config(void)
{
/* Modify voltage scaling range */
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1);
/* Wait until VOSF is reset */
while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF));
/* HSI clock config */
MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, RCC_HSICALIBRATION_DEFAULT << RCC_ICSCR_HSITRIM_Pos);
/* Adjust the HSI16 division factor */
MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, RCC_HSI_DIV1);
/* Update the SystemCoreClock global variable with HSISYS value */
SystemCoreClock = (HSI_VALUE / (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)));
/* Adapt Systick interrupt period */
SysTick_Config(SystemCoreClock / 1000U); // 1kHz
NVIC_SetPriority(SysTick_IRQn, SYS_TICK_PRIO);
/* LSI config */
/* Disable the Internal Low Speed oscillator (LSI). */
CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
/* Wait till LSI is disabled */
while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U);
/* PLL config */
/* Disable the main PLL. */
CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
/* Wait till PLL is ready */
while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U);
/* Configure the main PLL clock source, multiplication and division factors. */
MODIFY_REG(RCC->PLLCFGR, (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR),
(RCC_PLLSOURCE_HSI | RCC_PLLM_DIV1 | (8 << RCC_PLLCFGR_PLLN_Pos) | RCC_PLLP_DIV2 | RCC_PLLQ_DIV2 | RCC_PLLR_DIV2));
/* Enable the main PLL. */
SET_BIT(RCC->CR, RCC_CR_PLLON);
/* Enable PLLR Clock output. */
SET_BIT(RCC->PLLCFGR, RCC_PLLRCLK);
/* Wait till PLL is ready */
while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U);
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, FLASH_LATENCY_2);
/* Check that the new number of wait states is taken into account to access the Flash
memory by polling the FLASH_ACR register */
while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLASH_LATENCY_2);
/* HCLK config */
/* Set the highest APB divider in order to ensure that we do not go through
a non-spec phase whatever we decrease or increase HCLK. */
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16);
/* Set the new HCLK clock divider */
MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV1);
/* SYSCLK config */
MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_SYSCLKSOURCE_PLLCLK);
while ((RCC->CFGR & RCC_CFGR_SWS) != (RCC_SYSCLKSOURCE_PLLCLK << RCC_CFGR_SWS_Pos));
/* PCLK1 Configuration */
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV1);
/* TODO: Update the SystemCoreClock global variable */
SystemCoreClock = 64000000;
/* Configure the USART2 clock source */
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, RCC_USART2CLKSOURCE_PCLK1);
}
#ifdef USE_FULL_ASSERT
void assert_failed(uint8_t *file, uint32_t line)
{

83
Core/main.h
View File

@ -1,83 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
#define MCO_Pin GPIO_PIN_0
#define MCO_GPIO_Port GPIOF
#define USART2_TX_Pin GPIO_PIN_2
#define USART2_TX_GPIO_Port GPIOA
#define USART2_RX_Pin GPIO_PIN_3
#define USART2_RX_GPIO_Port GPIOA
#define LED_GREEN_Pin GPIO_PIN_5
#define LED_GREEN_GPIO_Port GPIOA
#define TMS_Pin GPIO_PIN_13
#define TMS_GPIO_Port GPIOA
#define TCK_Pin GPIO_PIN_14
#define TCK_GPIO_Port GPIOA
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

16
Core/print.c
View File

@ -1,16 +0,0 @@
#include <stdint.h>
#include "main.h"
#ifdef __GNUC__
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
extern UART_HandleTypeDef huart2;
int __io_putchar(int ch)
{
HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, 0xFFFF);
return ch;
}

3783
Legacy/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
View File

File diff suppressed because it is too large Load Diff

839
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h
View File

@ -1,839 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_H
#define STM32G0xx_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_conf.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup HAL HAL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup HAL_TICK_FREQ Tick Frequency
* @{
*/
typedef enum
{
HAL_TICK_FREQ_10HZ = 100U,
HAL_TICK_FREQ_100HZ = 10U,
HAL_TICK_FREQ_1KHZ = 1U,
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
} HAL_TickFreqTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup HAL_Exported_Constants HAL Exported Constants
* @{
*/
/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants
* @{
*/
/** @defgroup SYSCFG_BootMode Boot Mode
* @{
*/
#define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */
#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */
#define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */
/**
* @}
*/
/** @defgroup SYSCFG_Break Break
* @{
*/
#define SYSCFG_BREAK_SP SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM Parity error signal with Break Input of TIM1/15/16/17 */
#if defined(SYSCFG_CFGR2_PVDL)
#define SYSCFG_BREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */
#endif /* SYSCFG_CFGR2_PVDL */
#define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/15/16/17 */
#define SYSCFG_BREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC of CortexM0+ with Break Input of TIM1/15/16/17 */
/**
* @}
*/
#if defined(SYSCFG_CDEN_SUPPORT)
/** @defgroup SYSCFG_ClampingDiode Clamping Diode
* @{
*/
#define SYSCFG_CDEN_PA1 SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping Diode on PA1 */
#define SYSCFG_CDEN_PA3 SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping Diode on PA3 */
#define SYSCFG_CDEN_PA5 SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping Diode on PA5 */
#define SYSCFG_CDEN_PA6 SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping Diode on PA6 */
#define SYSCFG_CDEN_PA13 SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping Diode on PA13 */
#define SYSCFG_CDEN_PB0 SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping Diode on PB0 */
#define SYSCFG_CDEN_PB1 SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping Diode on PB1 */
#define SYSCFG_CDEN_PB2 SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping Diode on PB2 */
/**
* @}
*/
#endif /* SYSCFG_CDEN_SUPPORT */
/** @defgroup HAL_Pin_remapping Pin remapping
* @{
*/
/* Only available on cut2.0 */
#define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */
#define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */
/**
* @}
*/
/** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection
* @{
*/
#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */
#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */
#if defined(USART4)
#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IR Modulation envelope source */
#else
#define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */
#endif /* USART4 */
/**
* @}
*/
/** @defgroup HAL_IR_POL_SEL IR output polarity selection
* @{
*/
#define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */
#define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */
/**
* @}
*/
#if defined(VREFBUF)
/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale
* @{
*/
#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0: VREF_OUT1 around 2.048 V.
This requires VDDA equal to or higher than 2.4 V. */
#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1: VREF_OUT1 around 2.5 V.
This requires VDDA equal to or higher than 2.8 V. */
/**
* @}
*/
/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance
* @{
*/
#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0x00000000U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */
#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */
/**
* @}
*/
#endif /* VREFBUF */
/** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO
* @{
*/
/** @brief Fast mode Plus driving capability on a specific GPIO
*/
#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */
#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */
#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */
#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */
#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */
#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */
/**
* @}
*/
/** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx
* @{
*/
/** @brief Fast mode Plus driving capability on a specific GPIO
*/
#define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */
#define SYSCFG_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast mode Plus on I2C2 */
#if defined (I2C3)
#define SYSCFG_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast mode Plus on I2C3 */
#endif /* I2C3 */
/**
* @}
*/
#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE)
/** @defgroup SYSCFG_UCPDx_STROBE SYSCFG Dead Battery feature configuration
* @{
*/
#define SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 Dead battery sw configuration */
#define SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 Dead battery sw configuration */
/**
* @}
*/
#endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */
/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
* @brief ISR Wrapper
* @{
*/
#define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE1 0x00000001U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE8 0x00000008U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE15 0x0000000FU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE17 0x00000011U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE18 0x00000012U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE20 0x00000014U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE24 0x00000018U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE26 0x0000001AU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE29 0x0000001DU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE30 0x0000001EU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE31 0x0000001FU /*!< Internal define for macro handling */
#define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG) /*!< WWDG has expired .... */
#if defined (PWR_PVD_SUPPORT)
#define HAL_ITLINE_PVDOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT) /*!< Power voltage detection Interrupt .... */
#endif /* PWR_PVD_SUPPORT */
#if defined (PWR_PVM_SUPPORT)
#define HAL_ITLINE_PVMOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVMOUT) /*!< Power voltage monitor Interrupt .... */
#endif /* PWR_PVM_SUPPORT */
#define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC -> exti[19] Interrupt */
#define HAL_ITLINE_TAMPER ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_TAMPER) /*!< TAMPER -> exti[21] interrupt .... */
#define HAL_ITLINE_FLASH_ECC ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ECC) /*!< Flash ECC Interrupt */
#define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */
#define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */
#if defined (CRS)
#define HAL_ITLINE_CRS ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS) /*!< CRS Interrupt */
#endif /*CRS */
#define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */
#define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */
#define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */
#define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */
#define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */
#define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */
#define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */
#define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */
#define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */
#define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */
#define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */
#define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */
#define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */
#define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */
#define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */
#define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */
#if defined (UCPD1)
#define HAL_ITLINE_UCPD1 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD1) /*!< UCPD1 Interrupt */
#endif /* UCPD1 */
#if defined (UCPD2)
#define HAL_ITLINE_UCPD2 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD2) /*!< UCPD2 Interrupt */
#endif /* UCPD2 */
#if defined (STM32G0C1xx) || defined (STM32G0B1xx) || defined (STM32G0B0xx)
#define HAL_ITLINE_USB ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_USB) /*!< USB Interrupt */
#endif /* STM32G0C1xx) || STM32G0B1xx) || STM32G0B0xx */
#define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */
#define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */
#define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */
#define HAL_ITLINE_DMAMUX1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX1) /*!< DMAMUX1 Interrupt */
#define HAL_ITLINE_DMA1_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4) /*!< DMA1 Channel 4 Interrupt */
#define HAL_ITLINE_DMA1_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5) /*!< DMA1 Channel 5 Interrupt */
#if defined(DMA1_Channel7)
#define HAL_ITLINE_DMA1_CH6 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6) /*!< DMA1 Channel 6 Interrupt */
#define HAL_ITLINE_DMA1_CH7 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7) /*!< DMA1 Channel 7 Interrupt */
#endif /* DMA1_Channel7 */
#if defined (DMA2)
#define HAL_ITLINE_DMA2_CH1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH1) /*!< DMA2 Channel 1 Interrupt */
#define HAL_ITLINE_DMA2_CH2 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH2) /*!< DMA2 Channel 2 Interrupt */
#define HAL_ITLINE_DMA2_CH3 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3) /*!< DMA2 Channel 3 Interrupt */
#define HAL_ITLINE_DMA2_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4) /*!< DMA2 Channel 4 Interrupt */
#define HAL_ITLINE_DMA2_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5) /*!< DMA2 Channel 5 Interrupt */
#endif /* DMA2 */
#define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */
#if defined (COMP1)
#define HAL_ITLINE_COMP1 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1) /*!< COMP1 Interrupt -> exti[17] */
#endif /* COMP1 */
#if defined (COMP2)
#define HAL_ITLINE_COMP2 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2) /*!< COMP2 Interrupt -> exti[18] */
#endif /* COMP2 */
#if defined (COMP3)
#define HAL_ITLINE_COMP3 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP3) /*!< COMP3 Interrupt -> exti[1x] */
#endif /* COMP3 */
#define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */
#define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */
#define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */
#define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */
#define HAL_ITLINE_TIM1_CC ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC) /*!< TIM1 CC Interrupt */
#if defined (TIM2)
#define HAL_ITLINE_TIM2 ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB) /*!< TIM2 Interrupt */
#endif /* TIM2 */
#define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */
#if defined (TIM4)
#define HAL_ITLINE_TIM4 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM4_GLB) /*!< TIM4 Interrupt */
#endif /* TIM4 */
#if defined(TIM6)
#define HAL_ITLINE_TIM6 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB) /*!< TIM6 Interrupt */
#endif /* TIM6 */
#if defined(DAC1)
#define HAL_ITLINE_DAC ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC) /*!< DAC Interrupt */
#endif /* DAC1 */
#if defined(LPTIM1)
#define HAL_ITLINE_LPTIM1 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_LPTIM1_GLB) /*!< LPTIM1 Interrupt -> exti[29] */
#endif /* LPTIM1 */
#if defined(TIM7)
#define HAL_ITLINE_TIM7 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB) /*!< TIM7 Interrupt */
#endif /* TIM7 */
#if defined(LPTIM2)
#define HAL_ITLINE_LPTIM2 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_LPTIM2_GLB) /*!< LPTIM2 Interrupt -> exti[30] */
#endif /* LPTIM2 */
#define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */
#if defined(TIM15)
#define HAL_ITLINE_TIM15 ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB) /*!< TIM15 Interrupt */
#endif /* TIM15 */
#define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */
#if defined (FDCAN1) || defined (FDCAN2)
#define HAL_ITLINE_FDCAN1_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN1_IT0) /*!< FDCAN1_IT0 Interrupt */
#define HAL_ITLINE_FDCAN2_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN2_IT0) /*!< FDCAN2_IT0 Interrupt */
#endif /* FDCAN1 || FDCAN2 */
#define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */
#if defined (FDCAN1) || defined (FDCAN2)
#define HAL_ITLINE_FDCAN1_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN1_IT1) /*!< FDCAN1_IT1 Interrupt */
#define HAL_ITLINE_FDCAN2_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN2_IT1) /*!< FDCAN2_IT1 Interrupt */
#endif /* FDCAN1 || FDCAN2 */
#define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt -> exti[23] */
#define HAL_ITLINE_I2C2 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB) /*!< I2C2 Interrupt -> exti[24] */
#if defined (I2C3)
#define HAL_ITLINE_I2C3 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C3_GLB) /*!< I2C3 Interrupt -> exti[22] */
#endif /* I2C3 */
#define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */
#define HAL_ITLINE_SPI2 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2) /*!< SPI2 Interrupt */
#if defined (SPI3)
#define HAL_ITLINE_SPI3 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI3) /*!< SPI3 Interrupt */
#endif /* SPI3 */
#define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt -> exti[25] */
#define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt -> exti[26] */
#if defined (LPUART2)
#define HAL_ITLINE_LPUART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_LPUART2_GLB) /*!< LPUART2 GLB Interrupt -> exti[26] */
#endif /* LPUART2 */
#if defined(USART3)
#define HAL_ITLINE_USART3 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB) /*!< USART3 Interrupt .... */
#endif /* USART3 */
#if defined(USART4)
#define HAL_ITLINE_USART4 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB) /*!< USART4 Interrupt .... */
#endif /* USART4 */
#if defined (LPUART1)
#define HAL_ITLINE_LPUART1 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_LPUART1_GLB) /*!< LPUART1 Interrupt -> exti[28]*/
#endif /* LPUART1 */
#if defined (USART5)
#define HAL_ITLINE_USART5 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB) /*!< USART5 Interrupt .... */
#endif /* USART5 */
#if defined (USART6)
#define HAL_ITLINE_USART6 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB) /*!< USART6 Interrupt .... */
#endif /* USART6 */
#if defined (CEC)
#define HAL_ITLINE_CEC ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC) /*!< CEC Interrupt -> exti[27] */
#endif /* CEC */
#if defined (RNG)
#define HAL_ITLINE_RNG ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_RNG) /*!< RNG Interrupt */
#endif /* RNG */
#if defined (AES)
#define HAL_ITLINE_AES ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_AES) /*!< AES Interrupt */
#endif /* AES */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
* @{
*/
/** @defgroup DBG_Exported_Macros DBG Exported Macros
* @{
*/
/** @brief Freeze and Unfreeze Peripherals in Debug mode
*/
#if defined(DBG_APB_FZ1_DBG_TIM2_STOP)
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP)
#endif /* DBG_APB_FZ1_DBG_TIM2_STOP */
#if defined(DBG_APB_FZ1_DBG_TIM3_STOP)
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP)
#endif /* DBG_APB_FZ1_DBG_TIM3_STOP */
#if defined(DBG_APB_FZ1_DBG_TIM4_STOP)
#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP)
#endif /* DBG_APB_FZ1_DBG_TIM4_STOP */
#if defined(DBG_APB_FZ1_DBG_TIM6_STOP)
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP)
#endif /* DBG_APB_FZ1_DBG_TIM6_STOP */
#if defined(DBG_APB_FZ1_DBG_TIM7_STOP)
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP)
#endif /* DBG_APB_FZ1_DBG_TIM7_STOP */
#if defined(DBG_APB_FZ1_DBG_RTC_STOP)
#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP)
#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP)
#endif /* DBG_APB_FZ1_DBG_RTC_STOP */
#if defined(DBG_APB_FZ1_DBG_WWDG_STOP)
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP)
#endif /* DBG_APB_FZ1_DBG_WWDG_STOP */
#if defined(DBG_APB_FZ1_DBG_IWDG_STOP)
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP)
#endif /* DBG_APB_FZ1_DBG_IWDG_STOP */
#if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP)
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP)
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP)
#endif /* DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP */
#if defined(DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP)
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP)
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP)
#endif /* DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP */
#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP)
#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP)
#endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */
#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP)
#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP)
#endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */
#if defined(DBG_APB_FZ2_DBG_TIM1_STOP)
#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP)
#endif /* DBG_APB_FZ2_DBG_TIM1_STOP */
#if defined(DBG_APB_FZ2_DBG_TIM14_STOP)
#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP)
#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */
#if defined(DBG_APB_FZ2_DBG_TIM15_STOP)
#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP)
#endif /* DBG_APB_FZ2_DBG_TIM15_STOP */
#if defined(DBG_APB_FZ2_DBG_TIM16_STOP)
#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP)
#endif /* DBG_APB_FZ2_DBG_TIM16_STOP */
#if defined(DBG_APB_FZ2_DBG_TIM17_STOP)
#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP)
#endif /* DBG_APB_FZ2_DBG_TIM17_STOP */
/**
* @}
*/
/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros
* @{
*/
/**
* @brief ISR wrapper check
* @note Allow to determine interrupt source per line.
*/
#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF))
/** @brief Main Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)
/** @brief System Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0)
/** @brief Embedded SRAM mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() \
MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0))
/**
* @brief Return the boot mode as configured by user.
* @retval The boot mode as configured by user. The returned value can be one
* of the following values @ref SYSCFG_BootMode
*/
#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)
/** @brief SYSCFG Break ECC lock.
* Enable and lock the connection of Flash ECC error connection to TIM1 Break input.
* @note The selected configuration is locked and can be unlocked only by system reset.
*/
#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL)
/** @brief SYSCFG Break Cortex-M0+ Lockup lock.
* Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
* @note The selected configuration is locked and can be unlocked only by system reset.
*/
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL)
#if defined(SYSCFG_CFGR2_PVDL)
/** @brief SYSCFG Break PVD lock.
* Enables and locks the PVD connection with Timer1/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR register
* @note The selected configuration is locked and can be unlocked only by system reset
*/
#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL)
#endif /* SYSCFG_CFGR2_PVDL */
/** @brief SYSCFG Break SRAM PARITY lock
* Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/15/16/17
* @note The selected configuration is locked and can only be unlocked by system reset
*/
#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() SET_BIT(SYSCFG->CFGR2,SYSCFG_CFGR2_SPL)
/** @brief Parity check on RAM disable macro
* @note Disabling the parity check on RAM locks the configuration bit.
* To re-enable the parity check on RAM perform a system reset.
*/
#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SPF)
/** @brief Set the PEF bit to clear the SRAM Parity Error Flag.
*/
#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF)
/** @brief Fast-mode Plus driving capability enable/disable macros
* @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO
*/
#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
}while(0U)
#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
}while(0U)
#if defined(SYSCFG_CDEN_SUPPORT)
/** @brief Clamping Diode on specific pins enable/disable macros
* @param __PIN__ This parameter can be a combination of values @ref SYSCFG_ClampingDiode
*/
#define __HAL_SYSCFG_CLAMPINGDIODE_ENABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\
SET_BIT(SYSCFG->CFGR2, (__PIN__));\
}while(0U)
#define __HAL_SYSCFG_CLAMPINGDIODE_DISABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\
CLEAR_BIT(SYSCFG->CFGR2, (__PIN__));\
}while(0U)
#endif /* SYSCFG_CDEN_SUPPORT */
/** @brief ISR wrapper check
* @note Allow to determine interrupt source per line.
*/
#define __HAL_SYSCFG_GET_PENDING_IT(__SOURCE__) \
(SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFFU))
/** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register
* @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL
*/
#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\
SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\
}while(0U)
#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U)
/** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register
* @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL
*/
#define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\
SET_BIT(SYSCFG->CFGR1,(__SEL__));\
}while(0U)
/**
* @brief Return the IROut Polarity mode as configured by user.
* @retval The IROut polarity as configured by user. The returned value can be one
* of @ref HAL_IR_POL_SEL
*/
#define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL)
/** @brief Break input to TIM1/15/16/17 capability enable/disable macros
* @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break
*/
#define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\
SET_BIT(SYSCFG->CFGR2, (__BREAK__));\
}while(0U)
#define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\
CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\
}while(0U)
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros
* @{
*/
#if defined (PWR_PVD_SUPPORT)
#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \
((__CONFIG__) == SYSCFG_BREAK_PVD) || \
((__CONFIG__) == SYSCFG_BREAK_ECC) || \
((__CONFIG__) == SYSCFG_BREAK_LOCKUP))
#else
#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \
((__CONFIG__) == SYSCFG_BREAK_ECC) || \
((__CONFIG__) == SYSCFG_BREAK_LOCKUP))
#endif /* PWR_PVD_SUPPORT */
#if defined(SYSCFG_CDEN_SUPPORT)
#define IS_SYSCFG_CLAMPINGDIODE(__PIN__) ((((__PIN__) & SYSCFG_CDEN_PA1) == SYSCFG_CDEN_PA1) || \
(((__PIN__) & SYSCFG_CDEN_PA3) == SYSCFG_CDEN_PA3) || \
(((__PIN__) & SYSCFG_CDEN_PA5) == SYSCFG_CDEN_PA5) || \
(((__PIN__) & SYSCFG_CDEN_PA6) == SYSCFG_CDEN_PA6) || \
(((__PIN__) & SYSCFG_CDEN_PA13) == SYSCFG_CDEN_PA13) || \
(((__PIN__) & SYSCFG_CDEN_PB0) == SYSCFG_CDEN_PB0) || \
(((__PIN__) & SYSCFG_CDEN_PB1) == SYSCFG_CDEN_PB1) || \
(((__PIN__) & SYSCFG_CDEN_PB2) == SYSCFG_CDEN_PB2))
#endif /* SYSCFG_CDEN_SUPPORT */
#if defined (USART4)
#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4))
#else
#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2))
#endif /* USART4 */
#define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \
((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED))
#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE)
#define IS_SYSCFG_DBATT_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_UCPD1_STROBE) || \
((__CONFIG__) == SYSCFG_UCPD2_STROBE) || \
((__CONFIG__) == (SYSCFG_UCPD1_STROBE | SYSCFG_UCPD2_STROBE)))
#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */
#if defined(VREFBUF)
#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \
((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1))
#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \
((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE))
#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM))
#endif /* VREFBUF */
#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9))
#define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \
((RMP) == SYSCFG_REMAP_PA12) || \
((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12)))
/**
* @}
*/
/** @defgroup HAL_Private_Macros HAL Private Macros
* @{
*/
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
((FREQ) == HAL_TICK_FREQ_100HZ) || \
((FREQ) == HAL_TICK_FREQ_1KHZ))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup HAL_Exported_Functions HAL Exported Functions
* @{
*/
/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions
* @{
*/
/* Initialization and Configuration functions ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_IncTick(void);
void HAL_Delay(uint32_t Delay);
uint32_t HAL_GetTick(void);
uint32_t HAL_GetTickPrio(void);
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
uint32_t HAL_GetUIDw0(void);
uint32_t HAL_GetUIDw1(void);
uint32_t HAL_GetUIDw2(void);
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions
* @{
*/
/* DBGMCU Peripheral Control functions *****************************************/
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
/**
* @}
*/
/* Exported variables ---------------------------------------------------------*/
/** @addtogroup HAL_Exported_Variables
* @{
*/
extern __IO uint32_t uwTick;
extern uint32_t uwTickPrio;
extern HAL_TickFreqTypeDef uwTickFreq;
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions
* @{
*/
/* SYSCFG Control functions ****************************************************/
#if defined(VREFBUF)
void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling);
void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode);
void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue);
HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void);
void HAL_SYSCFG_DisableVREFBUF(void);
#endif /* VREFBUF */
void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void);
void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void);
void HAL_SYSCFG_EnableRemap(uint32_t PinRemap);
void HAL_SYSCFG_DisableRemap(uint32_t PinRemap);
#if defined(SYSCFG_CDEN_SUPPORT)
void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig);
void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig);
#endif /* SYSCFG_CDEN_SUPPORT */
#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE)
void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery);
#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

387
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h
View File

@ -1,387 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_CORTEX_H
#define STM32G0xx_HAL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup CORTEX CORTEX
* @brief CORTEX HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Types CORTEX Exported Types
* @{
*/
#if (__MPU_PRESENT == 1)
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
* @brief MPU Region initialization structure
* @{
*/
typedef struct
{
uint8_t Enable; /*!< Specifies the status of the region.
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
uint8_t Number; /*!< Specifies the number of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect.
*/
uint8_t Size; /*!< Specifies the size of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint8_t TypeExtField; /*!< Specifies the TEX field level.
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
uint8_t AccessPermission; /*!< Specifies the region access permission type.
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
uint8_t DisableExec; /*!< Specifies the instruction access status.
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
} MPU_Region_InitTypeDef;
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
* @{
*/
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
/**
* @}
*/
#if (__MPU_PRESENT == 1)
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control
* @{
*/
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk)
#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk)
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
* @{
*/
#define MPU_REGION_ENABLE ((uint8_t)0x01)
#define MPU_REGION_DISABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
* @{
*/
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
* @{
*/
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
* @{
*/
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
* @{
*/
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels
* @{
*/
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
* @{
*/
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
* @{
*/
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
* @{
*/
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros
* @{
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions
* @{
*/
/* Initialization and Configuration functions *****************************/
void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority);
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
void HAL_NVIC_SystemReset(void);
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
/**
* @}
*/
/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
* @brief Cortex control functions
* @{
*/
/* Peripheral Control functions *************************************************/
uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn);
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
void HAL_SYSTICK_IRQHandler(void);
void HAL_SYSTICK_Callback(void);
#if (__MPU_PRESENT == 1U)
void HAL_MPU_Enable(uint32_t MPU_Control);
void HAL_MPU_Disable(void);
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
* @{
*/
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4U)
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) > SysTick_IRQn)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
#if (__MPU_PRESENT == 1)
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
((STATE) == MPU_REGION_DISABLE))
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
((TYPE) == MPU_TEX_LEVEL1) || \
((TYPE) == MPU_TEX_LEVEL2))
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RW) || \
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
((TYPE) == MPU_REGION_FULL_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RO) || \
((TYPE) == MPU_REGION_PRIV_RO_URO))
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
((NUMBER) == MPU_REGION_NUMBER1) || \
((NUMBER) == MPU_REGION_NUMBER2) || \
((NUMBER) == MPU_REGION_NUMBER3) || \
((NUMBER) == MPU_REGION_NUMBER4) || \
((NUMBER) == MPU_REGION_NUMBER5) || \
((NUMBER) == MPU_REGION_NUMBER6) || \
((NUMBER) == MPU_REGION_NUMBER7))
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \
((SIZE) == MPU_REGION_SIZE_512B) || \
((SIZE) == MPU_REGION_SIZE_1KB) || \
((SIZE) == MPU_REGION_SIZE_2KB) || \
((SIZE) == MPU_REGION_SIZE_4KB) || \
((SIZE) == MPU_REGION_SIZE_8KB) || \
((SIZE) == MPU_REGION_SIZE_16KB) || \
((SIZE) == MPU_REGION_SIZE_32KB) || \
((SIZE) == MPU_REGION_SIZE_64KB) || \
((SIZE) == MPU_REGION_SIZE_128KB) || \
((SIZE) == MPU_REGION_SIZE_256KB) || \
((SIZE) == MPU_REGION_SIZE_512KB) || \
((SIZE) == MPU_REGION_SIZE_1MB) || \
((SIZE) == MPU_REGION_SIZE_2MB) || \
((SIZE) == MPU_REGION_SIZE_4MB) || \
((SIZE) == MPU_REGION_SIZE_8MB) || \
((SIZE) == MPU_REGION_SIZE_16MB) || \
((SIZE) == MPU_REGION_SIZE_32MB) || \
((SIZE) == MPU_REGION_SIZE_64MB) || \
((SIZE) == MPU_REGION_SIZE_128MB) || \
((SIZE) == MPU_REGION_SIZE_256MB) || \
((SIZE) == MPU_REGION_SIZE_512MB) || \
((SIZE) == MPU_REGION_SIZE_1GB) || \
((SIZE) == MPU_REGION_SIZE_2GB) || \
((SIZE) == MPU_REGION_SIZE_4GB))
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_CORTEX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

214
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h
View File

@ -1,214 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_def.h
* @author MCD Application Team
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_DEF
#define STM32G0xx_HAL_DEF
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx.h"
#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */
#include <stddef.h>
/* Exported types ------------------------------------------------------------*/
/**
* @brief HAL Status structures definition
*/
typedef enum
{
HAL_OK = 0x00U,
HAL_ERROR = 0x01U,
HAL_BUSY = 0x02U,
HAL_TIMEOUT = 0x03U
} HAL_StatusTypeDef;
/**
* @brief HAL Lock structures definition
*/
typedef enum
{
HAL_UNLOCKED = 0x00U,
HAL_LOCKED = 0x01U
} HAL_LockTypeDef;
/* Exported macros -----------------------------------------------------------*/
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
#define HAL_MAX_DELAY 0xFFFFFFFFU
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
do{ \
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
(__DMA_HANDLE__).Parent = (__HANDLE__); \
} while(0U)
/** @brief Reset the Handles State field.
* @param __HANDLE__ specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
* - When the Handle is declared as local variable; before passing it as parameter
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
* to set to 0 the Handles "State" field.
* Otherwise, "State" field may have any random value and the first time the function
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
* (i.e. HAL_PPP_MspInit() will not be executed).
* - When there is a need to reconfigure the low level hardware: instead of calling
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
* In this later function, when the Handles "State" field is set to 0, it will execute the function
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
* @retval None
*/
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
#if (USE_RTOS == 1U)
/* Reserved for future use */
#error " USE_RTOS should be 0 in the current HAL release "
#else
#define __HAL_LOCK(__HANDLE__) \
do{ \
if((__HANDLE__)->Lock == HAL_LOCKED) \
{ \
return HAL_BUSY; \
} \
else \
{ \
(__HANDLE__)->Lock = HAL_LOCKED; \
} \
}while (0U)
#define __HAL_UNLOCK(__HANDLE__) \
do{ \
(__HANDLE__)->Lock = HAL_UNLOCKED; \
}while (0U)
#endif /* USE_RTOS */
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#ifndef __weak
#define __weak __attribute__((weak))
#endif
#ifndef __packed
#define __packed __attribute__((packed))
#endif
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
/* GNU Compiler */
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4)))
#endif
#elif defined (__GNUC__) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4U)))
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif /* __ALIGN_BEGIN */
#else
#ifndef __ALIGN_END
#define __ALIGN_END
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
/* ARM Compiler */
#if defined (__CC_ARM) /* ARM Compiler V5 */
#define __ALIGN_BEGIN __align(4U)
/* IAR Compiler */
#elif defined (__ICCARM__)
#define __ALIGN_BEGIN
#endif /* __CC_ARM */
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
/**
* @brief __RAM_FUNC definition
*/
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
/* ARM Compiler V4/V5 and V6
--------------------------
RAM functions are defined using the toolchain options.
Functions that are executed in RAM should reside in a separate source module.
Using the 'Options for File' dialog you can simply change the 'Code / Const'
area of a module to a memory space in physical RAM.
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
dialog.
*/
#define __RAM_FUNC
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc
#elif defined ( __GNUC__ )
/* GNU Compiler
------------
RAM functions are defined using a specific toolchain attribute
"__attribute__((section(".RamFunc")))".
*/
#define __RAM_FUNC __attribute__((section(".RamFunc")))
#endif
/**
* @brief __NOINLINE definition
*/
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
/* ARM V4/V5 and V6 & GNU Compiler
-------------------------------
*/
#define __NOINLINE __attribute__ ( (noinline) )
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
*/
#define __NOINLINE _Pragma("optimize = no_inline")
#endif
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_DEF */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

803
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h
View File

@ -1,803 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_dma.h
* @author MCD Application Team
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_DMA_H
#define STM32G0xx_HAL_DMA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
#include "stm32g0xx_ll_dma.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup DMA
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMA_Exported_Types DMA Exported Types
* @{
*/
/**
* @brief DMA Configuration Structure definition
*/
typedef struct
{
uint32_t Request; /*!< Specifies the request selected for the specified channel.
This parameter can be a value of @ref DMA_request */
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
from memory to memory or from peripheral to memory.
This parameter can be a value of @ref DMA_Data_transfer_direction */
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
This parameter can be a value of @ref DMA_Memory_incremented_mode */
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
This parameter can be a value of @ref DMA_Peripheral_data_size */
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
This parameter can be a value of @ref DMA_Memory_data_size */
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
This parameter can be a value of @ref DMA_mode
@note The circular buffer mode cannot be used if the memory-to-memory
data transfer is configured on the selected Channel */
uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
This parameter can be a value of @ref DMA_Priority_level */
} DMA_InitTypeDef;
/**
* @brief HAL DMA State structures definition
*/
typedef enum
{
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
} HAL_DMA_StateTypeDef;
/**
* @brief HAL DMA Error Code structure definition
*/
typedef enum
{
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
} HAL_DMA_LevelCompleteTypeDef;
/**
* @brief HAL DMA Callback ID structure definition
*/
typedef enum
{
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */
} HAL_DMA_CallbackIDTypeDef;
/**
* @brief DMA handle Structure definition
*/
typedef struct __DMA_HandleTypeDef
{
DMA_Channel_TypeDef *Instance; /*!< Register base address */
DMA_InitTypeDef Init; /*!< DMA communication parameters */
HAL_LockTypeDef Lock; /*!< DMA locking object */
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
void *Parent; /*!< Parent object state */
void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */
void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */
void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */
void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */
__IO uint32_t ErrorCode; /*!< DMA Error code */
#if defined(DMA2)
DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
#endif
uint32_t ChannelIndex; /*!< DMA Channel Index */
DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */
DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */
uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */
DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */
DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */
uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */
} DMA_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA_Exported_Constants DMA Exported Constants
* @{
*/
/** @defgroup DMA_Error_Code DMA Error Code
* @{
*/
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
#define HAL_DMA_ERROR_BUSY 0x00000080U /*!< DMA Busy error */
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */
#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */
/**
* @}
*/
/** @defgroup DMA_request DMA request
* @{
*/
#define DMA_REQUEST_MEM2MEM LL_DMAMUX_REQ_MEM2MEM /*!< memory to memory transfer */
#define DMA_REQUEST_GENERATOR0 LL_DMAMUX_REQ_GENERATOR0 /*!< DMAMUX request generator 0 */
#define DMA_REQUEST_GENERATOR1 LL_DMAMUX_REQ_GENERATOR1 /*!< DMAMUX request generator 1 */
#define DMA_REQUEST_GENERATOR2 LL_DMAMUX_REQ_GENERATOR2 /*!< DMAMUX request generator 2 */
#define DMA_REQUEST_GENERATOR3 LL_DMAMUX_REQ_GENERATOR3 /*!< DMAMUX request generator 3 */
#define DMA_REQUEST_ADC1 LL_DMAMUX_REQ_ADC1 /*!< DMAMUX ADC1 request */
#if defined(AES)
#define DMA_REQUEST_AES_IN LL_DMAMUX_REQ_AES_IN /*!< DMAMUX AES_IN request */
#define DMA_REQUEST_AES_OUT LL_DMAMUX_REQ_AES_OUT /*!< DMAMUX AES_OUT request */
#endif
#if defined(DAC1)
#define DMA_REQUEST_DAC1_CH1 LL_DMAMUX_REQ_DAC1_CH1 /*!< DMAMUX DAC_CH1 request */
#define DMA_REQUEST_DAC1_CH2 LL_DMAMUX_REQ_DAC1_CH2 /*!< DMAMUX DAC_CH2 request */
#endif
#define DMA_REQUEST_I2C1_RX LL_DMAMUX_REQ_I2C1_RX /*!< DMAMUX I2C1 RX request */
#define DMA_REQUEST_I2C1_TX LL_DMAMUX_REQ_I2C1_TX /*!< DMAMUX I2C1 TX request */
#define DMA_REQUEST_I2C2_RX LL_DMAMUX_REQ_I2C2_RX /*!< DMAMUX I2C2 RX request */
#define DMA_REQUEST_I2C2_TX LL_DMAMUX_REQ_I2C2_TX /*!< DMAMUX I2C2 TX request */
#if defined(LPUART1)
#define DMA_REQUEST_LPUART1_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LPUART1 RX request */
#define DMA_REQUEST_LPUART1_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LPUART1 TX request */
#endif
#define DMA_REQUEST_SPI1_RX LL_DMAMUX_REQ_SPI1_RX /*!< DMAMUX SPI1 RX request */
#define DMA_REQUEST_SPI1_TX LL_DMAMUX_REQ_SPI1_TX /*!< DMAMUX SPI1 TX request */
#define DMA_REQUEST_SPI2_RX LL_DMAMUX_REQ_SPI2_RX /*!< DMAMUX SPI2 RX request */
#define DMA_REQUEST_SPI2_TX LL_DMAMUX_REQ_SPI2_TX /*!< DMAMUX SPI2 TX request */
#define DMA_REQUEST_TIM1_CH1 LL_DMAMUX_REQ_TIM1_CH1 /*!< DMAMUX TIM1 CH1 request */
#define DMA_REQUEST_TIM1_CH2 LL_DMAMUX_REQ_TIM1_CH2 /*!< DMAMUX TIM1 CH2 request */
#define DMA_REQUEST_TIM1_CH3 LL_DMAMUX_REQ_TIM1_CH3 /*!< DMAMUX TIM1 CH3 request */
#define DMA_REQUEST_TIM1_CH4 LL_DMAMUX_REQ_TIM1_CH4 /*!< DMAMUX TIM1 CH4 request */
#define DMA_REQUEST_TIM1_TRIG_COM LL_DMAMUX_REQ_TIM1_TRIG_COM /*!< DMAMUX TIM1 TRIG COM request */
#define DMA_REQUEST_TIM1_UP LL_DMAMUX_REQ_TIM1_UP /*!< DMAMUX TIM1 UP request */
#if defined(TIM2)
#define DMA_REQUEST_TIM2_CH1 LL_DMAMUX_REQ_TIM2_CH1 /*!< DMAMUX TIM2 CH1 request */
#define DMA_REQUEST_TIM2_CH2 LL_DMAMUX_REQ_TIM2_CH2 /*!< DMAMUX TIM2 CH2 request */
#define DMA_REQUEST_TIM2_CH3 LL_DMAMUX_REQ_TIM2_CH3 /*!< DMAMUX TIM2 CH3 request */
#define DMA_REQUEST_TIM2_CH4 LL_DMAMUX_REQ_TIM2_CH4 /*!< DMAMUX TIM2 CH4 request */
#define DMA_REQUEST_TIM2_TRIG LL_DMAMUX_REQ_TIM2_TRIG /*!< DMAMUX TIM2 TRIG request */
#define DMA_REQUEST_TIM2_UP LL_DMAMUX_REQ_TIM2_UP /*!< DMAMUX TIM2 UP request */
#endif
#define DMA_REQUEST_TIM3_CH1 LL_DMAMUX_REQ_TIM3_CH1 /*!< DMAMUX TIM3 CH1 request */
#define DMA_REQUEST_TIM3_CH2 LL_DMAMUX_REQ_TIM3_CH2 /*!< DMAMUX TIM3 CH2 request */
#define DMA_REQUEST_TIM3_CH3 LL_DMAMUX_REQ_TIM3_CH3 /*!< DMAMUX TIM3 CH3 request */
#define DMA_REQUEST_TIM3_CH4 LL_DMAMUX_REQ_TIM3_CH4 /*!< DMAMUX TIM3 CH4 request */
#define DMA_REQUEST_TIM3_TRIG LL_DMAMUX_REQ_TIM3_TRIG /*!< DMAMUX TIM3 TRIG request */
#define DMA_REQUEST_TIM3_UP LL_DMAMUX_REQ_TIM3_UP /*!< DMAMUX TIM3 UP request */
#if defined(TIM6)
#define DMA_REQUEST_TIM6_UP LL_DMAMUX_REQ_TIM6_UP /*!< DMAMUX TIM6 UP request */
#endif
#if defined(TIM7)
#define DMA_REQUEST_TIM7_UP LL_DMAMUX_REQ_TIM7_UP /*!< DMAMUX TIM7 UP request */
#endif
#if defined(TIM15)
#define DMA_REQUEST_TIM15_CH1 LL_DMAMUX_REQ_TIM15_CH1 /*!< DMAMUX TIM15 CH1 request */
#define DMA_REQUEST_TIM15_CH2 LL_DMAMUX_REQ_TIM15_CH2 /*!< DMAMUX TIM15 CH2 request */
#define DMA_REQUEST_TIM15_TRIG_COM LL_DMAMUX_REQ_TIM15_TRIG_COM /*!< DMAMUX TIM15 TRIG COM request */
#define DMA_REQUEST_TIM15_UP LL_DMAMUX_REQ_TIM15_UP /*!< DMAMUX TIM15 UP request */
#endif
#define DMA_REQUEST_TIM16_CH1 LL_DMAMUX_REQ_TIM16_CH1 /*!< DMAMUX TIM16 CH1 request */
#define DMA_REQUEST_TIM16_COM LL_DMAMUX_REQ_TIM16_COM /*!< DMAMUX TIM16 COM request */
#define DMA_REQUEST_TIM16_UP LL_DMAMUX_REQ_TIM16_UP /*!< DMAMUX TIM16 UP request */
#define DMA_REQUEST_TIM17_CH1 LL_DMAMUX_REQ_TIM17_CH1 /*!< DMAMUX TIM17 CH1 request */
#define DMA_REQUEST_TIM17_COM LL_DMAMUX_REQ_TIM17_COM /*!< DMAMUX TIM17 COM request */
#define DMA_REQUEST_TIM17_UP LL_DMAMUX_REQ_TIM17_UP /*!< DMAMUX TIM17 UP request */
#define DMA_REQUEST_USART1_RX LL_DMAMUX_REQ_USART1_RX /*!< DMAMUX USART1 RX request */
#define DMA_REQUEST_USART1_TX LL_DMAMUX_REQ_USART1_TX /*!< DMAMUX USART1 TX request */
#define DMA_REQUEST_USART2_RX LL_DMAMUX_REQ_USART2_RX /*!< DMAMUX USART2 RX request */
#define DMA_REQUEST_USART2_TX LL_DMAMUX_REQ_USART2_TX /*!< DMAMUX USART2 TX request */
#if defined(USART3)
#define DMA_REQUEST_USART3_RX LL_DMAMUX_REQ_USART3_RX /*!< DMAMUX USART3 RX request */
#define DMA_REQUEST_USART3_TX LL_DMAMUX_REQ_USART3_TX /*!< DMAMUX USART3 TX request */
#endif
#if defined(USART4)
#define DMA_REQUEST_USART4_RX LL_DMAMUX_REQ_USART4_RX /*!< DMAMUX USART4 RX request */
#define DMA_REQUEST_USART4_TX LL_DMAMUX_REQ_USART4_TX /*!< DMAMUX USART4 TX request */
#endif
#if defined(UCPD1)
#define DMA_REQUEST_UCPD1_RX LL_DMAMUX_REQ_UCPD1_RX /*!< DMAMUX UCPD1 RX request */
#define DMA_REQUEST_UCPD1_TX LL_DMAMUX_REQ_UCPD1_TX /*!< DMAMUX UCPD1 TX request */
#endif
#if defined(UCPD2)
#define DMA_REQUEST_UCPD2_RX LL_DMAMUX_REQ_UCPD2_RX /*!< DMAMUX UCPD2 RX request */
#define DMA_REQUEST_UCPD2_TX LL_DMAMUX_REQ_UCPD2_TX /*!< DMAMUX UCPD2 TX request */
#endif
#if defined(I2C3)
#define DMA_REQUEST_I2C3_RX LL_DMAMUX_REQ_I2C3_RX /*!< DMAMUX I2C3 RX request */
#define DMA_REQUEST_I2C3_TX LL_DMAMUX_REQ_I2C3_TX /*!< DMAMUX I2C3 TX request */
#endif
#if defined(LPUART2)
#define DMA_REQUEST_LPUART2_RX LL_DMAMUX_REQ_LPUART2_RX /*!< DMAMUX LPUART2 RX request */
#define DMA_REQUEST_LPUART2_TX LL_DMAMUX_REQ_LPUART2_TX /*!< DMAMUX LPUART2 TX request */
#endif
#if defined(SPI3)
#define DMA_REQUEST_SPI3_RX LL_DMAMUX_REQ_SPI3_RX /*!< DMAMUX SPI3 RX request */
#define DMA_REQUEST_SPI3_TX LL_DMAMUX_REQ_SPI3_TX /*!< DMAMUX SPI3 TX request */
#endif
#if defined(TIM4)
#define DMA_REQUEST_TIM4_CH1 LL_DMAMUX_REQ_TIM4_CH1 /*!< DMAMUX TIM4 CH1 request */
#define DMA_REQUEST_TIM4_CH2 LL_DMAMUX_REQ_TIM4_CH2 /*!< DMAMUX TIM4 CH2 request */
#define DMA_REQUEST_TIM4_CH3 LL_DMAMUX_REQ_TIM4_CH3 /*!< DMAMUX TIM4 CH3 request */
#define DMA_REQUEST_TIM4_CH4 LL_DMAMUX_REQ_TIM4_CH4 /*!< DMAMUX TIM4 CH4 request */
#define DMA_REQUEST_TIM4_TRIG LL_DMAMUX_REQ_TIM4_TRIG /*!< DMAMUX TIM4 TRIG request */
#define DMA_REQUEST_TIM4_UP LL_DMAMUX_REQ_TIM4_UP /*!< DMAMUX TIM4 UP request */
#endif
#if defined(USART5)
#define DMA_REQUEST_USART5_RX LL_DMAMUX_REQ_USART5_RX /*!< DMAMUX USART5 RX request */
#define DMA_REQUEST_USART5_TX LL_DMAMUX_REQ_USART5_TX /*!< DMAMUX USART5 TX request */
#endif
#if defined(USART6)
#define DMA_REQUEST_USART6_RX LL_DMAMUX_REQ_USART6_RX /*!< DMAMUX USART6 RX request */
#define DMA_REQUEST_USART6_TX LL_DMAMUX_REQ_USART6_TX /*!< DMAMUX USART6 TX request */
#endif
#define DMA_MAX_REQUEST LL_DMAMUX_MAX_REQ
/**
* @}
*/
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
* @{
*/
#define DMA_PERIPH_TO_MEMORY LL_DMA_DIRECTION_PERIPH_TO_MEMORY /*!< Peripheral to memory direction */
#define DMA_MEMORY_TO_PERIPH LL_DMA_DIRECTION_MEMORY_TO_PERIPH /*!< Memory to peripheral direction */
#define DMA_MEMORY_TO_MEMORY LL_DMA_DIRECTION_MEMORY_TO_MEMORY /*!< Memory to memory direction */
/**
* @}
*/
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
* @{
*/
#define DMA_PINC_ENABLE LL_DMA_PERIPH_INCREMENT /*!< Peripheral increment mode Enable */
#define DMA_PINC_DISABLE LL_DMA_PERIPH_NOINCREMENT /*!< Peripheral increment mode Disable */
/**
* @}
*/
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
* @{
*/
#define DMA_MINC_ENABLE LL_DMA_MEMORY_INCREMENT /*!< Memory increment mode Enable */
#define DMA_MINC_DISABLE LL_DMA_MEMORY_NOINCREMENT /*!< Memory increment mode Disable */
/**
* @}
*/
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
* @{
*/
#define DMA_PDATAALIGN_BYTE LL_DMA_PDATAALIGN_BYTE /*!< Peripheral data alignment : Byte */
#define DMA_PDATAALIGN_HALFWORD LL_DMA_PDATAALIGN_HALFWORD /*!< Peripheral data alignment : HalfWord */
#define DMA_PDATAALIGN_WORD LL_DMA_PDATAALIGN_WORD /*!< Peripheral data alignment : Word */
/**
* @}
*/
/** @defgroup DMA_Memory_data_size DMA Memory data size
* @{
*/
#define DMA_MDATAALIGN_BYTE LL_DMA_MDATAALIGN_BYTE /*!< Memory data alignment : Byte */
#define DMA_MDATAALIGN_HALFWORD LL_DMA_MDATAALIGN_HALFWORD /*!< Memory data alignment : HalfWord */
#define DMA_MDATAALIGN_WORD LL_DMA_MDATAALIGN_WORD /*!< Memory data alignment : Word */
/**
* @}
*/
/** @defgroup DMA_mode DMA mode
* @{
*/
#define DMA_NORMAL LL_DMA_MODE_NORMAL /*!< Normal mode */
#define DMA_CIRCULAR LL_DMA_MODE_CIRCULAR /*!< Circular mode */
/**
* @}
*/
/** @defgroup DMA_Priority_level DMA Priority level
* @{
*/
#define DMA_PRIORITY_LOW LL_DMA_PRIORITY_LOW /*!< Priority level : Low */
#define DMA_PRIORITY_MEDIUM LL_DMA_PRIORITY_MEDIUM /*!< Priority level : Medium */
#define DMA_PRIORITY_HIGH LL_DMA_PRIORITY_HIGH /*!< Priority level : High */
#define DMA_PRIORITY_VERY_HIGH LL_DMA_PRIORITY_VERYHIGH /*!< Priority level : Very_High */
/**
* @}
*/
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
* @{
*/
#define DMA_IT_TC DMA_CCR_TCIE /*!< Transfer Complete interrupt */
#define DMA_IT_HT DMA_CCR_HTIE /*!< Half Transfer Complete interrupt */
#define DMA_IT_TE DMA_CCR_TEIE /*!< Transfer Error interrupt */
/**
* @}
*/
/** @defgroup DMA_flag_definitions DMA flag definitions
* @{
*/
#define DMA_FLAG_GI1 DMA_ISR_GIF1 /*!< Global Interrupt flag for Channel 1 */
#define DMA_FLAG_TC1 DMA_ISR_TCIF1 /*!< Transfer Complete flag for Channel 1 */
#define DMA_FLAG_HT1 DMA_ISR_HTIF1 /*!< Half Transfer flag for Channel 1 */
#define DMA_FLAG_TE1 DMA_ISR_TEIF1 /*!< Transfer Error flag for Channel 1 */
#define DMA_FLAG_GI2 DMA_ISR_GIF2 /*!< Global Interrupt flag for Channel 2 */
#define DMA_FLAG_TC2 DMA_ISR_TCIF2 /*!< Transfer Complete flag for Channel 2 */
#define DMA_FLAG_HT2 DMA_ISR_HTIF2 /*!< Half Transfer flag for Channel 2 */
#define DMA_FLAG_TE2 DMA_ISR_TEIF2 /*!< Transfer Error flag for Channel 2 */
#define DMA_FLAG_GI3 DMA_ISR_GIF3 /*!< Global Interrupt flag for Channel 3 */
#define DMA_FLAG_TC3 DMA_ISR_TCIF3 /*!< Transfer Complete flag for Channel 3 */
#define DMA_FLAG_HT3 DMA_ISR_HTIF3 /*!< Half Transfer flag for Channel 3 */
#define DMA_FLAG_TE3 DMA_ISR_TEIF3 /*!< Transfer Error flag for Channel 3 */
#define DMA_FLAG_GI4 DMA_ISR_GIF4 /*!< Global Interrupt flag for Channel 4 */
#define DMA_FLAG_TC4 DMA_ISR_TCIF4 /*!< Transfer Complete flag for Channel 4 */
#define DMA_FLAG_HT4 DMA_ISR_HTIF4 /*!< Half Transfer flag for Channel 4 */
#define DMA_FLAG_TE4 DMA_ISR_TEIF4 /*!< Transfer Error flag for Channel 4 */
#define DMA_FLAG_GI5 DMA_ISR_GIF5 /*!< Global Interrupt flag for Channel 5 */
#define DMA_FLAG_TC5 DMA_ISR_TCIF5 /*!< Transfer Complete flag for Channel 5 */
#define DMA_FLAG_HT5 DMA_ISR_HTIF5 /*!< Half Transfer flag for Channel 5 */
#define DMA_FLAG_TE5 DMA_ISR_TEIF5 /*!< Transfer Error for Channel 5 */
#if defined(DMA1_Channel6)
#define DMA_FLAG_GI6 DMA_ISR_GIF6 /*!< Global Interrupt flag for Channel 6 */
#define DMA_FLAG_TC6 DMA_ISR_TCIF6 /*!< Transfer Complete flag for Channel 6 */
#define DMA_FLAG_HT6 DMA_ISR_HTIF6 /*!< Half Transfer flag for Channel 6 */
#define DMA_FLAG_TE6 DMA_ISR_TEIF6 /*!< Transfer Error flag for Channel 6 */
#endif
#if defined(DMA1_Channel7)
#define DMA_FLAG_GI7 DMA_ISR_GIF7 /*!< Global Interrupt flag for Channel 7 */
#define DMA_FLAG_TC7 DMA_ISR_TCIF7 /*!< Transfer Complete flag for Channel 7 */
#define DMA_FLAG_HT7 DMA_ISR_HTIF7 /*!< Half Transfer flag for Channel 7 */
#define DMA_FLAG_TE7 DMA_ISR_TEIF7 /*!< Transfer Error flag for Channel 7 */
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup DMA_Exported_Macros DMA Exported Macros
* @{
*/
/** @brief Reset DMA handle state
* @param __HANDLE__ DMA handle
* @retval None
*/
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
/**
* @brief Enable the specified DMA Channel.
* @param __HANDLE__ DMA handle
* @retval None
*/
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
/**
* @brief Disable the specified DMA Channel.
* @param __HANDLE__ DMA handle
* @retval None
*/
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
/**
* @brief Return the current DMA Channel transfer complete flag.
* @param __HANDLE__ DMA handle
* @retval The specified transfer complete flag index.
*/
#if defined(DMA2)
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
DMA_FLAG_TC7)
#else /* DMA1 */
#if defined(DMA1_Channel7)
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
DMA_FLAG_TC7)
#else
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
DMA_FLAG_TC5)
#endif
#endif /* DMA2 */
/**
* @brief Return the current DMA Channel half transfer complete flag.
* @param __HANDLE__ DMA handle
* @retval The specified half transfer complete flag index.
*/
#if defined(DMA2)
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
DMA_FLAG_HT7)
#else /* DMA1 */
#if defined(DMA1_Channel7)
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
DMA_FLAG_HT7)
#else
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
DMA_FLAG_HT5)
#endif
#endif /* DMA2 */
/**
* @brief Return the current DMA Channel transfer error flag.
* @param __HANDLE__ DMA handle
* @retval The specified transfer error flag index.
*/
#if defined(DMA2)
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
DMA_FLAG_TE7)
#else /* DMA1 */
#if defined(DMA1_Channel7)
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
DMA_FLAG_TE7)
#else
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
DMA_FLAG_TE5)
#endif
#endif /* DMA2 */
/**
* @brief Return the current DMA Channel Global interrupt flag.
* @param __HANDLE__ DMA handle
* @retval The specified transfer error flag index.
*/
#if defined(DMA2)
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GI1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GI2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GI3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GI4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_GI5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\
DMA_FLAG_GI7)
#else /* DMA1 */
#if defined(DMA1_Channel7)
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\
DMA_FLAG_GI7)
#else
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\
DMA_FLAG_GI5)
#endif
#endif /* DMA2 */
/**
* @brief Get the DMA Channel pending flags.
* @param __HANDLE__ DMA handle
* @param __FLAG__ Get the specified flag.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCx: Transfer complete flag
* @arg DMA_FLAG_HTx: Half transfer complete flag
* @arg DMA_FLAG_TEx: Transfer error flag
* @arg DMA_FLAG_GIx: Global interrupt flag
* Where x can be 1 to max Channel supported by the product to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
#if defined(DMA2)
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \
(DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__)))
#else /* DMA1 */
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
#endif /* DMA2 */
/**
* @brief Clear the DMA Channel pending flags.
* @param __HANDLE__ DMA handle
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCx: Transfer complete flag
* @arg DMA_FLAG_HTx: Half transfer complete flag
* @arg DMA_FLAG_TEx: Transfer error flag
* @arg DMA_FLAG_GIx: Global interrupt flag
* Where x can be 1 to max Channel supported by the product to select the DMA Channel flag.
* @retval None
*/
#if defined(DMA2)
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \
(DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__)))
#else /* DMA1 */
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__))
#endif /* DMA2 */
/**
* @brief Enable the specified DMA Channel interrupts.
* @param __HANDLE__ DMA handle
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer complete interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @retval None
*/
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
/**
* @brief Disable the specified DMA Channel interrupts.
* @param __HANDLE__ DMA handle
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer complete interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @retval None
*/
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified DMA Channel interrupt is enabled or disabled.
* @param __HANDLE__ DMA handle
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer complete interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @retval The state of DMA_IT (SET or RESET).
*/
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
/**
* @brief Returns the number of remaining data units in the current DMA Channel transfer.
* @param __HANDLE__ DMA handle
* @retval The number of remaining data units in the current DMA Channel transfer.
*/
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
/**
* @}
*/
/* Include DMA HAL Extension module */
#include "stm32g0xx_hal_dma_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA_Exported_Functions
* @{
*/
/** @addtogroup DMA_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/** @addtogroup DMA_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
/**
* @}
*/
/** @addtogroup DMA_Exported_Functions_Group3
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DMA_Private_Macros DMA Private Macros
* @{
*/
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < DMA_CNDTR_NDT))
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
((STATE) == DMA_PINC_DISABLE))
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
((STATE) == DMA_MINC_DISABLE))
#define IS_DMA_ALL_REQUEST(REQUEST) ((REQUEST) <= DMA_MAX_REQUEST)
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
((SIZE) == DMA_PDATAALIGN_WORD))
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
((SIZE) == DMA_MDATAALIGN_WORD ))
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
((MODE) == DMA_CIRCULAR))
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
((PRIORITY) == DMA_PRIORITY_HIGH) || \
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_DMA_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

280
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h
View File

@ -1,280 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_dma_ex.h
* @author MCD Application Team
* @brief Header file of DMA HAL extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_DMA_EX_H
#define STM32G0xx_HAL_DMA_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
#include "stm32g0xx_ll_dmamux.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup DMAEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
* @{
*/
/**
* @brief HAL DMAMUX Synchronization configuration structure definition
*/
typedef struct
{
uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode.
This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */
uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized.
This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */
FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled
This parameter can take the value ENABLE or DISABLE */
FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached.
This parameter can take the value ENABLE or DISABLE */
uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event
This parameter must be a number between Min_Data = 1 and Max_Data = 32 */
} HAL_DMA_MuxSyncConfigTypeDef;
/**
* @brief HAL DMAMUX request generator parameters structure definition
*/
typedef struct
{
uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator
This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */
uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated.
This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */
uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event
This parameter must be a number between Min_Data = 1 and Max_Data = 32 */
} HAL_DMA_MuxRequestGeneratorConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
* @{
*/
/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection
* @{
*/
#define HAL_DMAMUX1_SYNC_EXTI0 LL_DMAMUX_SYNC_EXTI_LINE0 /*!< Synchronization signal from EXTI Line0 */
#define HAL_DMAMUX1_SYNC_EXTI1 LL_DMAMUX_SYNC_EXTI_LINE1 /*!< Synchronization signal from EXTI Line1 */
#define HAL_DMAMUX1_SYNC_EXTI2 LL_DMAMUX_SYNC_EXTI_LINE2 /*!< Synchronization signal from EXTI Line2 */
#define HAL_DMAMUX1_SYNC_EXTI3 LL_DMAMUX_SYNC_EXTI_LINE3 /*!< Synchronization signal from EXTI Line3 */
#define HAL_DMAMUX1_SYNC_EXTI4 LL_DMAMUX_SYNC_EXTI_LINE4 /*!< Synchronization signal from EXTI Line4 */
#define HAL_DMAMUX1_SYNC_EXTI5 LL_DMAMUX_SYNC_EXTI_LINE5 /*!< Synchronization signal from EXTI Line5 */
#define HAL_DMAMUX1_SYNC_EXTI6 LL_DMAMUX_SYNC_EXTI_LINE6 /*!< Synchronization signal from EXTI Line6 */
#define HAL_DMAMUX1_SYNC_EXTI7 LL_DMAMUX_SYNC_EXTI_LINE7 /*!< Synchronization signal from EXTI Line7 */
#define HAL_DMAMUX1_SYNC_EXTI8 LL_DMAMUX_SYNC_EXTI_LINE8 /*!< Synchronization signal from EXTI Line8 */
#define HAL_DMAMUX1_SYNC_EXTI9 LL_DMAMUX_SYNC_EXTI_LINE9 /*!< Synchronization signal from EXTI Line9 */
#define HAL_DMAMUX1_SYNC_EXTI10 LL_DMAMUX_SYNC_EXTI_LINE10 /*!< Synchronization signal from EXTI Line10 */
#define HAL_DMAMUX1_SYNC_EXTI11 LL_DMAMUX_SYNC_EXTI_LINE11 /*!< Synchronization signal from EXTI Line11 */
#define HAL_DMAMUX1_SYNC_EXTI12 LL_DMAMUX_SYNC_EXTI_LINE12 /*!< Synchronization signal from EXTI Line12 */
#define HAL_DMAMUX1_SYNC_EXTI13 LL_DMAMUX_SYNC_EXTI_LINE13 /*!< Synchronization signal from EXTI Line1 3 */
#define HAL_DMAMUX1_SYNC_EXTI14 LL_DMAMUX_SYNC_EXTI_LINE14 /*!< Synchronization signal from EXTI Line1 4 */
#define HAL_DMAMUX1_SYNC_EXTI15 LL_DMAMUX_SYNC_EXTI_LINE15 /*!< Synchronization signal from EXTI Line1 5 */
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT LL_DMAMUX_SYNC_DMAMUX_CH0 /*!< Synchronization signal from DMAMUX channel0 Event */
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT LL_DMAMUX_SYNC_DMAMUX_CH1 /*!< Synchronization signal from DMAMUX channel1 Event */
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT LL_DMAMUX_SYNC_DMAMUX_CH2 /*!< Synchronization signal from DMAMUX channel2 Event */
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT LL_DMAMUX_SYNC_DMAMUX_CH3 /*!< Synchronization signal from DMAMUX channel3 Event */
#if defined(LPTIM1)
#define HAL_DMAMUX1_SYNC_LPTIM1_OUT LL_DMAMUX_SYNC_LPTIM1_OUT /*!< Synchronization signal from LPTIM1 Output */
#endif
#if defined(LPTIM2)
#define HAL_DMAMUX1_SYNC_LPTIM2_OUT LL_DMAMUX_SYNC_LPTIM2_OUT /*!< Synchronization signal from LPTIM2 Output */
#endif
#define HAL_DMAMUX1_SYNC_TIM14_OC LL_DMAMUX_SYNC_TIM14_OC /*!< Synchronization signal from TIM14 OC */
#define HAL_DMAMUX1_MAX_SYNC HAL_DMAMUX1_SYNC_TIM14_OC
/**
* @}
*/
/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection
* @{
*/
#define HAL_DMAMUX_SYNC_NO_EVENT LL_DMAMUX_SYNC_NO_EVENT /*!< block synchronization events */
#define HAL_DMAMUX_SYNC_RISING LL_DMAMUX_SYNC_POL_RISING /*!< synchronize with rising edge events */
#define HAL_DMAMUX_SYNC_FALLING LL_DMAMUX_SYNC_POL_FALLING /*!< synchronize with falling edge events */
#define HAL_DMAMUX_SYNC_RISING_FALLING LL_DMAMUX_SYNC_POL_RISING_FALLING /*!< synchronize with rising and falling edge events */
/**
* @}
*/
/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection
* @{
*/
#define HAL_DMAMUX1_REQ_GEN_EXTI0 LL_DMAMUX_REQ_GEN_EXTI_LINE0 /*!< Request signal generation from EXTI Line0 */
#define HAL_DMAMUX1_REQ_GEN_EXTI1 LL_DMAMUX_REQ_GEN_EXTI_LINE1 /*!< Request signal generation from EXTI Line1 */
#define HAL_DMAMUX1_REQ_GEN_EXTI2 LL_DMAMUX_REQ_GEN_EXTI_LINE2 /*!< Request signal generation from EXTI Line2 */
#define HAL_DMAMUX1_REQ_GEN_EXTI3 LL_DMAMUX_REQ_GEN_EXTI_LINE3 /*!< Request signal generation from EXTI Line3 */
#define HAL_DMAMUX1_REQ_GEN_EXTI4 LL_DMAMUX_REQ_GEN_EXTI_LINE4 /*!< Request signal generation from EXTI Line4 */
#define HAL_DMAMUX1_REQ_GEN_EXTI5 LL_DMAMUX_REQ_GEN_EXTI_LINE5 /*!< Request signal generation from EXTI Line5 */
#define HAL_DMAMUX1_REQ_GEN_EXTI6 LL_DMAMUX_REQ_GEN_EXTI_LINE6 /*!< Request signal generation from EXTI Line6 */
#define HAL_DMAMUX1_REQ_GEN_EXTI7 LL_DMAMUX_REQ_GEN_EXTI_LINE7 /*!< Request signal generation from EXTI Line7 */
#define HAL_DMAMUX1_REQ_GEN_EXTI8 LL_DMAMUX_REQ_GEN_EXTI_LINE8 /*!< Request signal generation from EXTI Line8 */
#define HAL_DMAMUX1_REQ_GEN_EXTI9 LL_DMAMUX_REQ_GEN_EXTI_LINE9 /*!< Request signal generation from EXTI Line9 */
#define HAL_DMAMUX1_REQ_GEN_EXTI10 LL_DMAMUX_REQ_GEN_EXTI_LINE10 /*!< Request signal generation from EXTI Line10 */
#define HAL_DMAMUX1_REQ_GEN_EXTI11 LL_DMAMUX_REQ_GEN_EXTI_LINE11 /*!< Request signal generation from EXTI Line11 */
#define HAL_DMAMUX1_REQ_GEN_EXTI12 LL_DMAMUX_REQ_GEN_EXTI_LINE12 /*!< Request signal generation from EXTI Line12 */
#define HAL_DMAMUX1_REQ_GEN_EXTI13 LL_DMAMUX_REQ_GEN_EXTI_LINE13 /*!< Request signal generation from EXTI Line13 */
#define HAL_DMAMUX1_REQ_GEN_EXTI14 LL_DMAMUX_REQ_GEN_EXTI_LINE14 /*!< Request signal generation from EXTI Line14 */
#define HAL_DMAMUX1_REQ_GEN_EXTI15 LL_DMAMUX_REQ_GEN_EXTI_LINE15 /*!< Request signal generation from EXTI Line15 */
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH0 /*!< Request signal generation from DMAMUX channel0 Event */
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH1 /*!< Request signal generation from DMAMUX channel1 Event */
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH2 /*!< Request signal generation from DMAMUX channel2 Event */
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH3 /*!< Request signal generation from DMAMUX channel3 Event */
#if defined(LPTIM1)
#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT LL_DMAMUX_REQ_GEN_LPTIM1_OUT /*!< Request signal generation from LPTIM1 Output */
#endif
#if defined(LPTIM2)
#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT LL_DMAMUX_REQ_GEN_LPTIM2_OUT /*!< Request signal generation from LPTIM2 Output */
#endif
#define HAL_DMAMUX1_REQ_GEN_TIM14_OC LL_DMAMUX_REQ_GEN_TIM14_OC /*!< Request signal generation from TIM14 OC */
#define HAL_DMAMUX1_MAX_REQ_GEN HAL_DMAMUX1_REQ_GEN_TIM14_OC
/**
* @}
*/
/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection
* @{
*/
#define HAL_DMAMUX_REQ_GEN_NO_EVENT LL_DMAMUX_REQ_GEN_NO_EVENT /*!< block request generator events */
#define HAL_DMAMUX_REQ_GEN_RISING LL_DMAMUX_REQ_GEN_POL_RISING /*!< generate request on rising edge events */
#define HAL_DMAMUX_REQ_GEN_FALLING LL_DMAMUX_REQ_GEN_POL_FALLING /*!< generate request on falling edge events */
#define HAL_DMAMUX_REQ_GEN_RISING_FALLING LL_DMAMUX_REQ_GEN_POL_RISING_FALLING /*!< generate request on rising and falling edge events */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMAEx_Exported_Functions
* @{
*/
/* IO operation functions *****************************************************/
/** @addtogroup DMAEx_Exported_Functions_Group1
* @{
*/
/* ------------------------- REQUEST -----------------------------------------*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma,
HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig);
HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma);
/* -------------------------------------------------------------------------- */
/* ------------------------- SYNCHRO -----------------------------------------*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig);
/* -------------------------------------------------------------------------- */
void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DMAEx_Private_Macros DMAEx Private Macros
* @brief DMAEx private macros
* @{
*/
#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_SYNC_EXTI0) || \
(((SIGNAL_ID) >= HAL_DMAMUX1_SYNC_EXTI1) && \
((SIGNAL_ID) <= HAL_DMAMUX1_MAX_SYNC)))
#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \
((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \
((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \
((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING))
#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE))
#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \
((EVENT) == ENABLE))
#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_REQ_GEN_EXTI0) || \
(((SIGNAL_ID) >= HAL_DMAMUX1_REQ_GEN_EXTI1) && \
((SIGNAL_ID) <= HAL_DMAMUX1_MAX_REQ_GEN)))
#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT)|| \
((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \
((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \
((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_DMA_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

389
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h
View File

@ -1,389 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_exti.h
* @author MCD Application Team
* @brief Header file of EXTI HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_EXTI_H
#define STM32G0xx_HAL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup EXTI EXTI
* @brief EXTI HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Types EXTI Exported Types
* @{
*/
typedef enum
{
HAL_EXTI_COMMON_CB_ID = 0x00U,
HAL_EXTI_RISING_CB_ID = 0x01U,
HAL_EXTI_FALLING_CB_ID = 0x02U,
} EXTI_CallbackIDTypeDef;
/**
* @brief EXTI Handle structure definition
*/
typedef struct
{
uint32_t Line; /*!< Exti line number */
void (* RisingCallback)(void); /*!< Exti rising callback */
void (* FallingCallback)(void); /*!< Exti falling callback */
} EXTI_HandleTypeDef;
/**
* @brief EXTI Configuration structure definition
*/
typedef struct
{
uint32_t Line; /*!< The Exti line to be configured. This parameter
can be a value of @ref EXTI_Line */
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
This parameter can be a combination of @ref EXTI_Mode */
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
can be a value of @ref EXTI_Trigger */
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
This parameter is only possible for line 0 to 15. It
can be a value of @ref EXTI_GPIOSel */
} EXTI_ConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_Line EXTI Line
* @{
*/
#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | 0x00u)
#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | 0x01u)
#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | 0x02u)
#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | 0x03u)
#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | 0x04u)
#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | 0x05u)
#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | 0x06u)
#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | 0x07u)
#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | 0x08u)
#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | 0x09u)
#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | 0x0Au)
#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | 0x0Bu)
#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | 0x0Cu)
#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | 0x0Du)
#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | 0x0Eu)
#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | 0x0Fu)
#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | 0x10u)
#if defined(COMP1)
#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_REG1 | 0x11u)
#else
#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u)
#endif
#if defined(COMP2)
#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | 0x12u)
#else
#define EXTI_LINE_18 (EXTI_RESERVED | EXTI_REG1 | 0x12u)
#endif
#define EXTI_LINE_19 (EXTI_DIRECT | EXTI_REG1 | 0x13u)
#if defined(COMP3)
#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | 0x14u)
#else
#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u)
#endif
#define EXTI_LINE_21 (EXTI_DIRECT | EXTI_REG1 | 0x15u)
#if defined(RCC_CCIPR_I2C2SEL)
#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | 0x16u)
#else
#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u)
#endif
#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17u)
#if defined(RCC_CCIPR_USART3SEL)
#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u)
#else
#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u)
#endif
#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u)
#if defined(RCC_CCIPR_USART2SEL)
#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | 0x1Au)
#else
#define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1Au)
#endif
#if defined(CEC)
#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | 0x1Bu)
#else
#define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1Bu)
#endif
#if defined(LPUART1)
#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | 0x1Cu)
#else
#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu)
#endif
#if defined(LPTIM1)
#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du)
#else
#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du)
#endif
#if defined(LPTIM2)
#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu)
#else
#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu)
#endif
#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | 0x1Fu)
#if defined(UCPD1)
#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | 0x00u)
#else
#define EXTI_LINE_32 (EXTI_RESERVED | EXTI_REG2 | 0x00u)
#endif
#if defined(UCPD2)
#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | 0x01u)
#else
#define EXTI_LINE_33 (EXTI_RESERVED | EXTI_REG2 | 0x01u)
#endif
#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | 0x02u)
#else
#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u)
#endif
#if defined(LPUART2)
#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_REG2 | 0x03u)
#else
#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u)
#endif
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_REG2 | 0x04u)
#endif
/**
* @}
*/
/** @defgroup EXTI_Mode EXTI Mode
* @{
*/
#define EXTI_MODE_NONE 0x00000000u
#define EXTI_MODE_INTERRUPT 0x00000001u
#define EXTI_MODE_EVENT 0x00000002u
/**
* @}
*/
/** @defgroup EXTI_Trigger EXTI Trigger
* @{
*/
#define EXTI_TRIGGER_NONE 0x00000000u
#define EXTI_TRIGGER_RISING 0x00000001u
#define EXTI_TRIGGER_FALLING 0x00000002u
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @}
*/
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
* @brief
* @{
*/
#define EXTI_GPIOA 0x00000000u
#define EXTI_GPIOB 0x00000001u
#define EXTI_GPIOC 0x00000002u
#define EXTI_GPIOD 0x00000003u
#if defined(GPIOE)
#define EXTI_GPIOE 0x00000004u
#endif
#define EXTI_GPIOF 0x00000005u
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
* @{
*/
/**
* @}
*/
/* Private constants --------------------------------------------------------*/
/** @defgroup EXTI_Private_Constants EXTI Private Constants
* @{
*/
/**
* @brief EXTI Line property definition
*/
#define EXTI_PROPERTY_SHIFT 24u
#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT)
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
/**
* @brief EXTI Register and bit usage
*/
#define EXTI_REG_SHIFT 16u
#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT)
#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT)
#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2)
#define EXTI_PIN_MASK 0x0000001Fu
/**
* @brief EXTI Mask for interrupt & event mode
*/
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
/**
* @brief EXTI Mask for trigger possibilities
*/
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @brief EXTI Line number
*/
#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
#define EXTI_LINE_NB 37uL
#elif defined(STM32G0B0xx)
#define EXTI_LINE_NB 37uL
#elif defined(STM32G081xx) || defined(STM32G071xx)
#define EXTI_LINE_NB 34uL
#elif defined(STM32G070xx)
#define EXTI_LINE_NB 34uL
#elif defined(STM32G041xx) || defined(STM32G031xx)
#define EXTI_LINE_NB 32uL
#else
#define EXTI_LINE_NB 32uL
#endif
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup EXTI_Private_Macros EXTI Private Macros
* @{
*/
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
(((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \
(((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u))))
#define IS_EXTI_MODE(__MODE__) ((((__MODE__) & EXTI_MODE_MASK) != 0x00u) && \
(((__MODE__) & ~EXTI_MODE_MASK) == 0x00u))
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \
((__EXTI_LINE__) == EXTI_TRIGGER_FALLING))
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
#if defined(GPIOE)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF))
#else
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOF))
#endif
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
* @brief EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
* @brief Configuration functions
* @{
*/
/* Configuration functions ****************************************************/
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
/**
* @}
*/
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
* @{
*/
/* IO operation functions *****************************************************/
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1018
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h
View File

File diff suppressed because it is too large Load Diff

119
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h
View File

@ -1,119 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_flash_ex.h
* @author MCD Application Team
* @brief Header file of FLASH HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_FLASH_EX_H
#define STM32G0xx_HAL_FLASH_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup FLASHEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASHEx_Empty_Check FLASHEx Empty Check
* @{
*/
#define FLASH_PROG_NOT_EMPTY 0x00000000u /*!< 1st location in Flash is programmed */
#define FLASH_PROG_EMPTY FLASH_ACR_PROGEMPTY /*!< 1st location in Flash is empty */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASHEx_Exported_Functions
* @{
*/
/* Extended Program operation functions *************************************/
/** @addtogroup FLASHEx_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
void HAL_FLASHEx_EnableDebugger(void);
void HAL_FLASHEx_DisableDebugger(void);
uint32_t HAL_FLASHEx_FlashEmptyCheck(void);
void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty);
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks);
#endif
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
* @{
*/
#define FLASH_PCROP_GRANULARITY_OFFSET 9u /*!< FLASH Code Readout Protection granularity offset */
#define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout Protection granularity, 512 Bytes */
/**
* @}
*/
/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
* @{
*/
#define IS_FLASH_EMPTY_CHECK(__VALUE__) (((__VALUE__) == FLASH_PROG_EMPTY) || ((__VALUE__) == FLASH_PROG_NOT_EMPTY))
void FLASH_PageErase(uint32_t Banks, uint32_t Page);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_FLASH_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

340
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h
View File

@ -1,340 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_gpio.h
* @author MCD Application Team
* @brief Header file of GPIO HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_GPIO_H
#define STM32G0xx_HAL_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup GPIO GPIO
* @brief GPIO HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Types GPIO Exported Types
* @{
*/
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins */
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIO_mode */
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
This parameter can be a value of @ref GPIO_pull */
uint32_t Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIO_speed */
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
} GPIO_InitTypeDef;
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
GPIO_PIN_RESET = 0U,
GPIO_PIN_SET
} GPIO_PinState;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_pins GPIO pins
* @{
*/
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */
/**
* @}
*/
/** @defgroup GPIO_mode GPIO mode
* @brief GPIO Configuration Mode
* Elements values convention: 0xX0yz00YZ
* - X : GPIO mode or EXTI Mode
* - y : External IT or Event trigger detection
* - z : IO configuration on External IT or Event
* - Y : Output type (Push Pull or Open Drain)
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
* @{
*/
#define GPIO_MODE_INPUT (0x00000000u) /*!< Input Floating Mode */
#define GPIO_MODE_OUTPUT_PP (0x00000001u) /*!< Output Push Pull Mode */
#define GPIO_MODE_OUTPUT_OD (0x00000011u) /*!< Output Open Drain Mode */
#define GPIO_MODE_AF_PP (0x00000002u) /*!< Alternate Function Push Pull Mode */
#define GPIO_MODE_AF_OD (0x00000012u) /*!< Alternate Function Open Drain Mode */
#define GPIO_MODE_ANALOG (0x00000003u) /*!< Analog Mode */
#define GPIO_MODE_IT_RISING (0x10110000u) /*!< External Interrupt Mode with Rising edge trigger detection */
#define GPIO_MODE_IT_FALLING (0x10210000u) /*!< External Interrupt Mode with Falling edge trigger detection */
#define GPIO_MODE_IT_RISING_FALLING (0x10310000u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING (0x10120000u) /*!< External Event Mode with Rising edge trigger detection */
#define GPIO_MODE_EVT_FALLING (0x10220000u) /*!< External Event Mode with Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING_FALLING (0x10320000u) /*!< External Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup GPIO_speed GPIO speed
* @brief GPIO Output Maximum frequency
* @{
*/
#define GPIO_SPEED_FREQ_LOW (0x00000000u) /*!< Low speed */
#define GPIO_SPEED_FREQ_MEDIUM (0x00000001u) /*!< Medium speed */
#define GPIO_SPEED_FREQ_HIGH (0x00000002u) /*!< High speed */
#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003u) /*!< Very high speed */
/**
* @}
*/
/** @defgroup GPIO_pull GPIO pull
* @brief GPIO Pull-Up or Pull-Down Activation
* @{
*/
#define GPIO_NOPULL (0x00000000u) /*!< No Pull-up or Pull-down activation */
#define GPIO_PULLUP (0x00000001u) /*!< Pull-up activation */
#define GPIO_PULLDOWN (0x00000002u) /*!< Pull-down activation */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
* @{
*/
/**
* @brief Check whether the specified EXTI line is rising edge asserted or not.
* @param __EXTI_LINE__ specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__))
/**
* @brief Clear the EXTI line rising pending bits.
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 = (__EXTI_LINE__))
/**
* @brief Check whether the specified EXTI line is falling edge asserted or not.
* @param __EXTI_LINE__ specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__))
/**
* @brief Clear the EXTI line falling pending bits.
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 = (__EXTI_LINE__))
/**
* @brief Check whether the specified EXTI line is asserted or not.
* @param __EXTI_LINE__ specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (__HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) || \
__HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__))
/**
* @brief Clear the EXTI's line pending bits.
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) \
do { \
__HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__); \
__HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__); \
} while(0)
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @param __EXTI_LINE__ specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__))
/**
* @brief Check whether the specified EXTI line flag is set or not.
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__)
/**
* @brief Clear the EXTI line pending flags.
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__)
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup GPIO_Private_Macros GPIO Private Macros
* @{
*/
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\
(((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u))
#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
((__MODE__) == GPIO_MODE_AF_PP) ||\
((__MODE__) == GPIO_MODE_AF_OD) ||\
((__MODE__) == GPIO_MODE_IT_RISING) ||\
((__MODE__) == GPIO_MODE_IT_FALLING) ||\
((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
((__MODE__) == GPIO_MODE_EVT_RISING) ||\
((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
((__MODE__) == GPIO_MODE_ANALOG))
#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\
((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH))
#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
((__PULL__) == GPIO_PULLUP) || \
((__PULL__) == GPIO_PULLDOWN))
/**
* @}
*/
/* Include GPIO HAL Extended module */
#include "stm32g0xx_hal_gpio_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
* @brief GPIO Exported Functions
* @{
*/
/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
* @brief Initialization and Configuration functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
/**
* @}
*/
/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
* @{
*/
/* IO operation functions *****************************************************/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_GPIO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

838
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h
View File

@ -1,838 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_gpio_ex.h
* @author MCD Application Team
* @brief Header file of GPIO HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_GPIO_EX_H
#define STM32G0xx_HAL_GPIO_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup GPIOEx GPIOEx
* @brief GPIO Extended HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
* @{
*/
/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
* @{
*/
#if defined (STM32G0C1xx) || defined (STM32G0B1xx)
/*------------------------- STM32G0C1xx / STM32G0B1xx ------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */
#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */
#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */
#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */
#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_LPTIM2 ((uint8_t)0x01) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */
#define GPIO_AF1_LPUART2 ((uint8_t)0x01) /*!< LPUART2 Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */
#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_FDCAN1 ((uint8_t)0x03) /*!< FDCAN1 Alternate Function mapping */
#define GPIO_AF3_FDCAN2 ((uint8_t)0x03) /*!< FDCAN2 Alternate Function mapping */
#define GPIO_AF3_LPUART2 ((uint8_t)0x03) /*!< LPUART2 Alternate Function mapping */
#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */
#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */
#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */
#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */
#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */
#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */
#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */
#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */
#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */
#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */
#define GPIO_AF7_COMP3 ((uint8_t)0x07) /*!< COMP3 Alternate Function mapping */
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */
#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */
#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_LPUART2 ((uint8_t)0x0A) /*!< LPUART2 Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0A)
#endif
#if defined (STM32G0B0xx)
/*------------------------- STM32G0B0xx ------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */
#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */
#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */
#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */
#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */
#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */
#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */
#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */
#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x09)
#endif
#if defined (STM32G081xx) || defined (STM32G071xx)
/*------------------------- STM32G081xx / STM32G071xx ------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */
#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */
#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_UCPD1 ((uint8_t)0x03) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF3_UCPD2 ((uint8_t)0x03) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */
#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */
#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */
#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */
#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */
#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
#endif /* STM32G081xx || STM32G071xx */
#if defined (STM32G070xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */
#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
#endif /* STM32G070xx */
#if defined (STM32G051xx) || defined (STM32G061xx)
/*------------------------- STM32G061xx / STM32G051xx ------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */
#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
#endif /* STM32G051xx || STM32G061xx */
#if defined (STM32G050xx)
/*------------------------- STM32G050xx --------------------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
#endif /* STM32G050xx */
#if defined (STM32G031xx) || defined (STM32G041xx)
/*------------------------- STM32G041xx / STM32G031xx ------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */
#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
#endif /* STM32G031xx || STM32G041xx */
#if defined (STM32G030xx)
/*------------------------- STM32G030xx --------------------------------------*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */
#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */
#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */
#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */
#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */
#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */
#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */
#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */
#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */
#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
#endif /* STM32G030xx */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
* @{
*/
/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index
* @{
*/
#if defined(GPIOE)
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
((__GPIOx__) == (GPIOB))? 1uL :\
((__GPIOx__) == (GPIOC))? 2uL :\
((__GPIOx__) == (GPIOD))? 3uL :\
((__GPIOx__) == (GPIOE))? 4uL : 5uL)
#else
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
((__GPIOx__) == (GPIOB))? 1uL :\
((__GPIOx__) == (GPIOC))? 2uL :\
((__GPIOx__) == (GPIOD))? 3uL : 5uL)
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_GPIO_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

242
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_iwdg.h
View File

@ -1,242 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_iwdg.h
* @author MCD Application Team
* @brief Header file of IWDG HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_IWDG_H
#define STM32G0xx_HAL_IWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup IWDG IWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup IWDG_Exported_Types IWDG Exported Types
* @{
*/
/**
* @brief IWDG Init structure definition
*/
typedef struct
{
uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
This parameter can be a value of @ref IWDG_Prescaler */
uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
} IWDG_InitTypeDef;
/**
* @brief IWDG Handle Structure definition
*/
typedef struct
{
IWDG_TypeDef *Instance; /*!< Register base address */
IWDG_InitTypeDef Init; /*!< IWDG required parameters */
} IWDG_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
* @{
*/
/** @defgroup IWDG_Prescaler IWDG Prescaler
* @{
*/
#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */
#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
/**
* @}
*/
/** @defgroup IWDG_Window_option IWDG Window option
* @{
*/
#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
* @{
*/
/**
* @brief Enable the IWDG peripheral.
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
/**
* @brief Reload IWDG counter with value defined in the reload register
* (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled).
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
* @{
*/
/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
* @{
*/
/* Initialization/Start functions ********************************************/
HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
* @{
*/
/* I/O operation functions ****************************************************/
HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup IWDG_Private_Constants IWDG Private Constants
* @{
*/
/**
* @brief IWDG Key Register BitMask
*/
#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */
#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */
#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */
#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup IWDG_Private_Macros IWDG Private Macros
* @{
*/
/**
* @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
/**
* @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
/**
* @brief Check IWDG prescaler value.
* @param __PRESCALER__ IWDG prescaler value
* @retval None
*/
#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
((__PRESCALER__) == IWDG_PRESCALER_8) || \
((__PRESCALER__) == IWDG_PRESCALER_16) || \
((__PRESCALER__) == IWDG_PRESCALER_32) || \
((__PRESCALER__) == IWDG_PRESCALER_64) || \
((__PRESCALER__) == IWDG_PRESCALER_128)|| \
((__PRESCALER__) == IWDG_PRESCALER_256))
/**
* @brief Check IWDG reload value.
* @param __RELOAD__ IWDG reload value
* @retval None
*/
#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
/**
* @brief Check IWDG window value.
* @param __WINDOW__ IWDG window value
* @retval None
*/
#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN)
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_IWDG_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

328
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h
View File

@ -1,328 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_pwr.h
* @author MCD Application Team
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_PWR_H
#define STM32G0xx_HAL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup PWR PWR
* @brief PWR HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Types PWR Exported Types
* @{
*/
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_WakeUp_Pins PWR WakeUp pins
* @{
*/
#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */
#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */
#if defined(PWR_CR3_EWUP3)
#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */
#endif
#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */
#if defined(PWR_CR3_EWUP5)
#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */
#endif
#define PWR_WAKEUP_PIN6 PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */
#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */
#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */
#if defined(PWR_CR3_EWUP3)
#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */
#endif
#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */
#if defined(PWR_CR3_EWUP5)
#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */
#endif
#define PWR_WAKEUP_PIN6_HIGH PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */
#define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level detection) */
#define PWR_WAKEUP_PIN2_LOW ((PWR_CR4_WP2 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level detection) */
#if defined(PWR_CR3_EWUP3)
#define PWR_WAKEUP_PIN3_LOW ((PWR_CR4_WP3 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level detection) */
#endif
#define PWR_WAKEUP_PIN4_LOW ((PWR_CR4_WP4 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level detection) */
#if defined(PWR_CR3_EWUP5)
#define PWR_WAKEUP_PIN5_LOW ((PWR_CR4_WP5 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP5) /*!< Wakeup pin 5 (with low level detection) */
#endif
#define PWR_WAKEUP_PIN6_LOW ((PWR_CR4_WP6 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP6) /*!< Wakeup pin 6 (with low level detection) */
/**
* @}
*/
/** @defgroup PWR_Low_Power_Mode_Selection PWR Low Power Mode Selection
* @{
*/
#define PWR_LOWPOWERMODE_STOP0 (0x00000000u) /*!< Stop 0: stop mode with main regulator */
#define PWR_LOWPOWERMODE_STOP1 (PWR_CR1_LPMS_0) /*!< Stop 1: stop mode with low power regulator */
#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */
#if defined(PWR_SHDW_SUPPORT)
#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */
#endif
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode
* @{
*/
#define PWR_MAINREGULATOR_ON (0x00000000u) /*!< Regulator in main mode */
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */
/**
* @}
*/
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
* @{
*/
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Sleep mode */
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Sleep mode */
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
* @{
*/
#define PWR_STOPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Stop mode */
#define PWR_STOPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Stop mode */
/**
* @}
*/
/** @defgroup PWR_Flag PWR Status Flags
* @brief Elements values convention: 0000 00XX 000Y YYYYb
* - Y YYYY : Flag position in the XX register (5 bits)
* - XX : Status register (2 bits)
* - 01: SR1 register
* - 10: SR2 register
* The only exception is PWR_FLAG_WU, encompassing all
* wake-up flags and set to PWR_SR1_WUF.
* @{
*/
#define PWR_FLAG_WUF1 (0x00010000u | PWR_SR1_WUF1) /*!< Wakeup event on wakeup pin 1 */
#define PWR_FLAG_WUF2 (0x00010000u | PWR_SR1_WUF2) /*!< Wakeup event on wakeup pin 2 */
#if defined(PWR_CR3_EWUP3)
#define PWR_FLAG_WUF3 (0x00010000u | PWR_SR1_WUF3) /*!< Wakeup event on wakeup pin 3 */
#endif
#define PWR_FLAG_WUF4 (0x00010000u | PWR_SR1_WUF4) /*!< Wakeup event on wakeup pin 4 */
#if defined(PWR_CR3_EWUP5)
#define PWR_FLAG_WUF5 (0x00010000u | PWR_SR1_WUF5) /*!< Wakeup event on wakeup pin 5 */
#endif
#define PWR_FLAG_WUF6 (0x00010000u | PWR_SR1_WUF6) /*!< Wakeup event on wakeup pin 6 */
#define PWR_FLAG_WUF (0x00010000u | PWR_SR1_WUF) /*!< Wakeup event on all wakeup pin */
#define PWR_FLAG_SB (0x00010000u | PWR_SR1_SBF) /*!< Standby flag */
#define PWR_FLAG_WUFI (0x00010000u | PWR_SR1_WUFI) /*!< Wakeup on internal wakeup line */
#define PWR_FLAG_FLASH_READY (0x00020000u | PWR_SR2_FLASH_RDY) /*!< Flash ready */
#define PWR_FLAG_REGLPS (0x00020000u | PWR_SR2_REGLPS) /*!< Regulator Low Power started */
#define PWR_FLAG_REGLPF (0x00020000u | PWR_SR2_REGLPF) /*!< Regulator Low Power flag */
#if defined(PWR_PVD_SUPPORT)
#define PWR_FLAG_PVDO (0x00020000u | PWR_SR2_PVDO) /*!< Power Voltage Detector output */
#endif
#if defined(PWR_PVM_SUPPORT)
#define PWR_FLAG_PVMO_USB (0x00020000u | PWR_SR2_PVMO_USB) /*!< Power Voltage Monitoring output */
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup PWR_Exported_Macros PWR Exported Macros
* @{
*/
/** @brief Check whether or not a specific PWR flag is set.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one a combination of following values:
* @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event
* was received from the WKUP pin 1.
* @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event
* was received from the WKUP pin 2.
* @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event
* was received from the WKUP pin 3. (*)
* @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event
* was received from the WKUP pin 4.
* @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event
* was received from the WKUP pin 5. (*)
* @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event
* was received from the WKUP pin 6.
* @arg PWR_FLAG_SB: StandBy Flag. Indicates that the system
* entered StandBy mode.
* @arg PWR_FLAG_WUFI: Wake-Up Flag Internal. Set when a wakeup is
* detected on the internal wakeup line.
* OR a combination of following values:
* @arg PWR_FLAG_FLASH_READY: Flash is ready. Indicates whether flash
* can be used or not
* @arg PWR_FLAG_REGLPS: Low Power Regulator Started. Indicates whether
* or not the low-power regulator is ready.
* @arg PWR_FLAG_REGLPF: Low Power Regulator Flag. Indicates whether the
* regulator is ready in main mode or is in low-power mode.
* @if defined(STM32G081xx)
* @arg PWR_FLAG_PVDO: Power Voltage Detector Output. Indicates whether
* VDD voltage is below or above the selected PVD threshold.
* @endif
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_PWR_GET_FLAG(__FLAG__) (((__FLAG__) & 0x00010000u) ?\
((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)) :\
((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)))
/** @brief Clear a specific PWR flag.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be a combination of following values:
* @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event
* was received from the WKUP pin 1.
* @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event
* was received from the WKUP pin 2.
* @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event
* was received from the WKUP pin 3. (*)
* @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event
* was received from the WKUP pin 4.
* @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event
* was received from the WKUP pin 5. (*)
* @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event
* was received from the WKUP pin 6.
* @arg PWR_FLAG_WUF: Encompasses all Wake Up Flags.
* @arg PWR_FLAG_SB: Standby Flag. Indicates that the system
* entered Standby mode.
* @retval None
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->SCR = (__FLAG__))
/**
* @}
*/
/* Private constants-------------------------------------------------------*/
/** @defgroup PWR_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants
* @{
*/
#define PWR_WUP_POLARITY_SHIFT 0x08u /*!< Internal constant used to retrieve wakeup pin polariry */
/**
* @}
*/
/* Private macros --------------------------------------------------------*/
/** @defgroup PWR_Private_Macros PWR Private Macros
* @{
*/
#define IS_PWR_WAKEUP_PIN(PIN) ((((PIN) & ((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) != 0x00000000u) && \
(((PIN) & ~((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) == 0x00000000u))
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \
((ENTRY) == PWR_SLEEPENTRY_WFE))
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \
((ENTRY) == PWR_STOPENTRY_WFE))
/**
* @}
*/
/* Include PWR HAL Extended module */
#include "stm32g0xx_hal_pwr_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions *******************************/
void HAL_PWR_DeInit(void);
/**
* @}
*/
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_PWR_EnableBkUpAccess(void);
void HAL_PWR_DisableBkUpAccess(void);
/* WakeUp pins configuration functions ****************************************/
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
/* Low Power modes configuration functions ************************************/
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
void HAL_PWR_EnterSTANDBYMode(void);
void HAL_PWR_EnableSleepOnExit(void);
void HAL_PWR_DisableSleepOnExit(void);
void HAL_PWR_EnableSEVOnPend(void);
void HAL_PWR_DisableSEVOnPend(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

643
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h
View File

@ -1,643 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_pwr_ex.h
* @author MCD Application Team
* @brief Header file of PWR HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_PWR_EX_H
#define STM32G0xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup PWREx PWREx
* @brief PWR Extended HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Types PWR Extended Exported Types
* @{
*/
#if defined(PWR_PVM_SUPPORT)
/**
* @brief PWR PVM configuration structure definition
*/
typedef struct
{
uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold.
This parameter can be a value of @ref PWREx_PVM_Type.
@arg @ref PWR_PVM_USB Peripheral Voltage Monitoring USB enable */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWREx_PVM_Mode. */
}PWR_PVMTypeDef;
#endif
#if defined(PWR_PVD_SUPPORT)
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
This parameter can be a value or a combination of
@ref PWR_PVD_detection_level. */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWR_PVD_Mode. */
}PWR_PVDTypeDef;
#endif
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants
* @{
*/
#if defined(PWR_PVD_SUPPORT)
/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels
* @note see datasheet for selection voltage value
* @{
*/
#define PWR_PVDLEVEL_RISING_0 (0x00000000u) /*!< PVD threshold level 0 for rising detection */
#define PWR_PVDLEVEL_RISING_1 (PWR_CR2_PVDRT_0) /*!< PVD threshold level 1 for rising detection */
#define PWR_PVDLEVEL_RISING_2 (PWR_CR2_PVDRT_1) /*!< PVD threshold level 2 for rising detection */
#define PWR_PVDLEVEL_RISING_3 (PWR_CR2_PVDRT_0 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 3 for rising detection */
#define PWR_PVDLEVEL_RISING_4 (PWR_CR2_PVDRT_2) /*!< PVD threshold level 4 for rising detection */
#define PWR_PVDLEVEL_RISING_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /*!< PVD threshold level 5 for rising detection */
#define PWR_PVDLEVEL_RISING_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 6 for rising detection */
#define PWR_PVDLEVEL_FALLING_0 (0x00000000u) /*!< PVD threshold level 0 for falling detection */
#define PWR_PVDLEVEL_FALLING_1 (PWR_CR2_PVDFT_0) /*!< PVD threshold level 1 for falling detection */
#define PWR_PVDLEVEL_FALLING_2 (PWR_CR2_PVDFT_1) /*!< PVD threshold level 2 for falling detection */
#define PWR_PVDLEVEL_FALLING_3 (PWR_CR2_PVDFT_0 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 3 for falling detection */
#define PWR_PVDLEVEL_FALLING_4 (PWR_CR2_PVDFT_2) /*!< PVD threshold level 4 for falling detection */
#define PWR_PVDLEVEL_FALLING_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /*!< PVD threshold level 5 for falling detection */
#define PWR_PVDLEVEL_FALLING_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 6 for falling detection */
#define PWR_PVDLEVEL_0 (PWR_PVDLEVEL_RISING_0 | PWR_PVDLEVEL_FALLING_0) /*!< same PVD threshold level 0 on rising & falling */
#define PWR_PVDLEVEL_1 (PWR_PVDLEVEL_RISING_1 | PWR_PVDLEVEL_FALLING_1) /*!< same PVD threshold level 1 on rising & falling */
#define PWR_PVDLEVEL_2 (PWR_PVDLEVEL_RISING_2 | PWR_PVDLEVEL_FALLING_2) /*!< same PVD threshold level 2 on rising & falling */
#define PWR_PVDLEVEL_3 (PWR_PVDLEVEL_RISING_3 | PWR_PVDLEVEL_FALLING_3) /*!< same PVD threshold level 3 on rising & falling */
#define PWR_PVDLEVEL_4 (PWR_PVDLEVEL_RISING_4 | PWR_PVDLEVEL_FALLING_4) /*!< same PVD threshold level 4 on rising & falling */
#define PWR_PVDLEVEL_5 (PWR_PVDLEVEL_RISING_5 | PWR_PVDLEVEL_FALLING_5) /*!< same PVD threshold level 5 on rising & falling */
#define PWR_PVDLEVEL_6 (PWR_PVDLEVEL_RISING_6 | PWR_PVDLEVEL_FALLING_6) /*!< same PVD threshold level 6 on rising & falling */
#define PWR_PVDLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /*!< External input analog voltage (compared internally to VREFINT) */
/**
* @}
*/
/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode
* @{
*/
#define PWR_PVD_MODE_NORMAL (0x00000000u) /*!< basic mode is used */
#define PWR_PVD_MODE_IT_RISING (0x00010001u) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_IT_FALLING (0x00010002u) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING (0x00020001u) /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_EVENT_FALLING (0x00020002u) /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003u) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line
* @{
*/
#define PWR_EXTI_LINE_PVD (EXTI_IMR1_IM16) /*!< External interrupt line 16 connected to PVD */
/**
* @}
*/
/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line
* @{
*/
#define PWR_EVENT_LINE_PVD (EXTI_EMR1_EM16) /*!< Event line 16 connected to PVD */
/**
* @}
*/
#endif
#if defined(PWR_PVM_SUPPORT)
/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type
* @{
*/
#define PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */
/**
* @}
*/
/** @defgroup PWREx_PVM_Mode PWR PVM interrupt and event mode
* @{
*/
#define PWR_PVM_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
#define PWR_PVM_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_PVM_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_PVM_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVM_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVM_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVM_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_PVM_EXTI_LINE PWR PVM external interrupt line
* @{
*/
#define PWR_EXTI_LINE_PVM (EXTI_IMR2_IM34) /*!< External interrupt line 34 connected to PVM */
/**
* @}
*/
/** @defgroup PWR_PVM_EVENT_LINE PWR PVM event line
* @{
*/
#define PWR_EVENT_LINE_PVM (EXTI_EMR2_EM34) /*!< Event line 34 connected to PVM */
/**
* @}
*/
#endif
/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection
* @{
*/
#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000u) /*!< VBAT charging through a 5 kOhms resistor */
#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR4_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */
/**
* @}
*/
/** @defgroup PWREx_GPIO_Bit_Number GPIO bit position
* @brief for I/O pull up/down setting in standby/shutdown mode
* @{
*/
#define PWR_GPIO_BIT_0 PWR_PUCRB_PU0 /*!< GPIO port I/O pin 0 */
#define PWR_GPIO_BIT_1 PWR_PUCRB_PU1 /*!< GPIO port I/O pin 1 */
#define PWR_GPIO_BIT_2 PWR_PUCRB_PU2 /*!< GPIO port I/O pin 2 */
#define PWR_GPIO_BIT_3 PWR_PUCRB_PU3 /*!< GPIO port I/O pin 3 */
#define PWR_GPIO_BIT_4 PWR_PUCRB_PU4 /*!< GPIO port I/O pin 4 */
#define PWR_GPIO_BIT_5 PWR_PUCRB_PU5 /*!< GPIO port I/O pin 5 */
#define PWR_GPIO_BIT_6 PWR_PUCRB_PU6 /*!< GPIO port I/O pin 6 */
#define PWR_GPIO_BIT_7 PWR_PUCRB_PU7 /*!< GPIO port I/O pin 7 */
#define PWR_GPIO_BIT_8 PWR_PUCRB_PU8 /*!< GPIO port I/O pin 8 */
#define PWR_GPIO_BIT_9 PWR_PUCRB_PU9 /*!< GPIO port I/O pin 9 */
#define PWR_GPIO_BIT_10 PWR_PUCRB_PU10 /*!< GPIO port I/O pin 10 */
#define PWR_GPIO_BIT_11 PWR_PUCRB_PU11 /*!< GPIO port I/O pin 11 */
#define PWR_GPIO_BIT_12 PWR_PUCRB_PU12 /*!< GPIO port I/O pin 12 */
#define PWR_GPIO_BIT_13 PWR_PUCRB_PU13 /*!< GPIO port I/O pin 13 */
#define PWR_GPIO_BIT_14 PWR_PUCRB_PU14 /*!< GPIO port I/O pin 14 */
#define PWR_GPIO_BIT_15 PWR_PUCRB_PU15 /*!< GPIO port I/O pin 15 */
/**
* @}
*/
/** @defgroup PWREx_GPIO_Port GPIO Port
* @{
*/
#define PWR_GPIO_A (0x00000000u) /*!< GPIO port A */
#define PWR_GPIO_B (0x00000001u) /*!< GPIO port B */
#define PWR_GPIO_C (0x00000002u) /*!< GPIO port C */
#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */
#if defined (GPIOE)
#define PWR_GPIO_E (0x00000004u) /*!< GPIO port E */
#endif
#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */
/**
* @}
*/
/** @defgroup PWREx_Flash_PowerDown Flash Power Down modes
* @{
*/
#define PWR_FLASHPD_LPRUN PWR_CR1_FPD_LPRUN /*!< Enable Flash power down in low power run mode */
#define PWR_FLASHPD_LPSLEEP PWR_CR1_FPD_LPSLP /*!< Enable Flash power down in low power sleep mode */
#define PWR_FLASHPD_STOP PWR_CR1_FPD_STOP /*!< Enable Flash power down in stop mode */
/**
* @}
*/
/** @defgroup PWREx_Regulator_Voltage_Scale PWR Regulator voltage scale
* @{
*/
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS_0 /*!< Voltage scaling range 1 */
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 /*!< Voltage scaling range 2 */
/**
* @}
*/
/** @addtogroup PWR_Flag PWR Status Flags
* @brief Elements values convention: 0000 00XX 000Y YYYYb
* - Y YYYY : Flag position in the XX register (5 bits)
* - XX : Status register (2 bits)
* - 01: SR1 register
* - 10: SR2 register
* The only exception is PWR_FLAG_WU, encompassing all
* wake-up flags and set to PWR_SR1_WUF.
* @{
*/
#if defined(PWR_PVM_SUPPORT)
#define PWR_FLAG_PVMOUSB (0x00020000u | PWR_SR2_PVMO_USB) /*!< USB Peripheral Voltage Monitoring output */
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @addtogroup PWREx_Exported_Macros PWR Extended Exported Macros
* @{
*/
#if defined(PWR_PVD_SUPPORT)
/**
* @brief Enable the PVD Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Event Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD)
/**
* @brief Disable the PVD Event Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD)
/**
* @brief Check whether or not the PVD EXTI interrupt Rising flag is set.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_RISING_FLAG() (EXTI->RPR1 & PWR_EXTI_LINE_PVD)
/**
* @brief Check whether or not the PVD EXTI interrupt Falling flag is set.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() (EXTI->FPR1 & PWR_EXTI_LINE_PVD)
/**
* @brief Clear the PVD EXTI interrupt Rising flag.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR1, PWR_EXTI_LINE_PVD)
/**
* @brief Clear the PVD EXTI interrupt Falling flag.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD)
#endif
#if defined(PWR_PVM_SUPPORT)
/**
* @brief Enable the PVM Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM)
/**
* @brief Disable the PVM Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM)
/**
* @brief Enable the PVM Event Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM)
/**
* @brief Disable the PVM Event Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM)
/**
* @brief Enable the PVM Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Disable the PVM Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Enable the PVM Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Disable the PVM Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Enable the PVM Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the PVM Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM)
/**
* @brief Check whether or not the PVM EXTI interrupt Rising flag is set.
* @retval EXTI PVM Line Status.
*/
#define __HAL_PWR_PVM_EXTI_GET_RISING_FLAG() (EXTI->RPR2 & PWR_EXTI_LINE_PVM)
/**
* @brief Check whether or not the PVM EXTI interrupt Falling flag is set.
* @retval EXTI PVM Line Status.
*/
#define __HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() (EXTI->FPR2 & PWR_EXTI_LINE_PVM)
/**
* @brief Clear the PVM EXTI interrupt Rising flag.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR2, PWR_EXTI_LINE_PVM)
/**
* @brief Clear the PVM EXTI interrupt Falling flag.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR2, PWR_EXTI_LINE_PVM)
#endif
/**
* @}
*/
/* Private define ------------------------------------------------------------*/
/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines
* @{
*/
/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask
* @{
*/
#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */
#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */
#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */
#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros
* @{
*/
#define IS_PWR_BATTERY_RESISTOR_SELECT(__RESISTOR__) (((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_5) || \
((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
#define IS_PWR_GPIO_BIT_NUMBER(__BIT_NUMBER__) ((((__BIT_NUMBER__) & 0x0000FFFFu) != 0x00u) && \
(((__BIT_NUMBER__) & 0xFFFF0000u) == 0x00u))
#if defined (GPIOE)
#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \
((__GPIO__) == PWR_GPIO_B) || \
((__GPIO__) == PWR_GPIO_C) || \
((__GPIO__) == PWR_GPIO_D) || \
((__GPIO__) == PWR_GPIO_E) || \
((__GPIO__) == PWR_GPIO_F))
#else
#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \
((__GPIO__) == PWR_GPIO_B) || \
((__GPIO__) == PWR_GPIO_C) || \
((__GPIO__) == PWR_GPIO_D) || \
((__GPIO__) == PWR_GPIO_F))
#endif
#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \
(((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) == 0x00u))
#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
#if defined(PWR_PVD_SUPPORT)
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) & ~(PWR_CR2_PVDRT | PWR_CR2_PVDFT)) == 0x00000000u)
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) || \
((MODE) == PWR_PVD_MODE_IT_RISING) || \
((MODE) == PWR_PVD_MODE_IT_FALLING) || \
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || \
((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || \
((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING))
#endif
#if defined(PWR_PVM_SUPPORT)
#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_USB)
#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\
((MODE) == PWR_PVM_MODE_IT_RISING) ||\
((MODE) == PWR_PVM_MODE_IT_FALLING) ||\
((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\
((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\
((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\
((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING))
#endif
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions
* @{
*/
/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions
* @{
*/
/* Peripheral Control functions **********************************************/
void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection);
void HAL_PWREx_DisableBatteryCharging(void);
#if defined(PWR_CR3_ENB_ULP)
void HAL_PWREx_EnablePORMonitorSampling(void);
void HAL_PWREx_DisablePORMonitorSampling(void);
#endif
void HAL_PWREx_EnableInternalWakeUpLine(void);
void HAL_PWREx_DisableInternalWakeUpLine(void);
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber);
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber);
void HAL_PWREx_EnablePullUpPullDownConfig(void);
void HAL_PWREx_DisablePullUpPullDownConfig(void);
#if defined(PWR_CR3_RRS)
void HAL_PWREx_EnableSRAMRetention(void);
void HAL_PWREx_DisableSRAMRetention(void);
#endif
void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode);
void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode);
uint32_t HAL_PWREx_GetVoltageRange(void);
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
#if defined(PWR_PVD_SUPPORT)
/* Power voltage detection configuration functions ****************************/
HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
void HAL_PWREx_EnablePVD(void);
void HAL_PWREx_DisablePVD(void);
#endif
#if defined(PWR_PVM_SUPPORT)
/* Power voltage monitoring configuration functions ***************************/
void HAL_PWREx_EnableVddIO2(void);
void HAL_PWREx_DisableVddIO2(void);
void HAL_PWREx_EnableVddUSB(void);
void HAL_PWREx_DisableVddUSB(void);
void HAL_PWREx_EnablePVMUSB(void);
void HAL_PWREx_DisablePVMUSB(void);
HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM);
#endif
/* Low Power modes configuration functions ************************************/
void HAL_PWREx_EnableLowPowerRunMode(void);
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void);
#if defined(PWR_SHDW_SUPPORT)
void HAL_PWREx_EnterSHUTDOWNMode(void);
#endif
#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT)
void HAL_PWREx_PVD_PVM_IRQHandler(void);
void HAL_PWREx_PVD_PVM_Rising_Callback(void);
void HAL_PWREx_PVD_PVM_Falling_Callback(void);
#elif defined(PWR_PVD_SUPPORT)
void HAL_PWREx_PVD_IRQHandler(void);
void HAL_PWREx_PVD_Rising_Callback(void);
void HAL_PWREx_PVD_Falling_Callback(void);
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_PWR_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

3111
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h
View File

File diff suppressed because it is too large Load Diff

1593
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h
View File

File diff suppressed because it is too large Load Diff

2425
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h
View File

File diff suppressed because it is too large Load Diff

496
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h
View File

@ -1,496 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_tim_ex.h
* @author MCD Application Team
* @brief Header file of TIM HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_TIM_EX_H
#define STM32G0xx_HAL_TIM_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup TIMEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
* @{
*/
/**
* @brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef;
/**
* @brief TIM Break/Break2 input configuration
*/
typedef struct
{
uint32_t Source; /*!< Specifies the source of the timer break input.
This parameter can be a value of @ref TIMEx_Break_Input_Source */
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
uint32_t Polarity; /*!< Specifies the break input source polarity.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */
}
TIMEx_BreakInputConfigTypeDef;
/**
* @}
*/
/* End of exported types -----------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
* @{
*/
/** @defgroup TIMEx_Remap TIM Extended Remapping
* @{
*/
#define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */
#if defined(COMP1) && defined(COMP2)
#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */
#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */
#endif /* COMP1 && COMP2 */
#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */
#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /* !< TIM1_ETR is connected to ADC1 AWD2 */
#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */
#if defined(COMP3)
#define TIM_TIM1_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to COMP3 output */
#endif
#if defined(TIM2)
#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */
#define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */
#define TIM_TIM2_ETR_COMP2 TIM2_AF1_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */
#define TIM_TIM2_ETR_LSE (TIM2_AF1_ETRSEL_1 | TIM2_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to LSE */
#if defined(COMP3)
#define TIM_TIM2_ETR_MCO TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to MCO */
#define TIM_TIM2_ETR_MCO2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to MCO2 */
#define TIM_TIM2_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP3 output */
#endif
#endif /* TIM2 */
#if defined(TIM3)
#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */
#if defined(COMP1) && defined(COMP2)
#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 output */
#define TIM_TIM3_ETR_COMP2 TIM3_AF1_ETRSEL_1 /* !< TIM3_ETR is connected to COMP2 output */
#endif /* COMP1 && COMP2 */
#if defined(COMP3)
#define TIM_TIM3_ETR_COMP3 (TIM3_AF1_ETRSEL_1 | TIM3_AF1_ETRSEL_0) /* !< TIM3_ETR is connected to COMP3 output */
#endif /* COMP3 */
#endif /* TIM3 */
#if defined(TIM4)
#define TIM_TIM4_ETR_GPIO 0x00000000U /* !< TIM4_ETR is connected to GPIO */
#if defined(COMP1) && defined(COMP2)
#define TIM_TIM4_ETR_COMP1 TIM4_AF1_ETRSEL_0 /* !< TIM4_ETR is connected to COMP1 output */
#define TIM_TIM4_ETR_COMP2 TIM4_AF1_ETRSEL_1 /* !< TIM4_ETR is connected to COMP2 output */
#endif /* COMP1 && COMP2 */
#if defined(COMP3)
#define TIM_TIM4_ETR_COMP3 (TIM4_AF1_ETRSEL_1 | TIM4_AF1_ETRSEL_0) /* !< TIM4_ETR is connected to COMP3 output */
#endif /* COMP3 */
#endif /* TIM4 */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input TIM Extended Break input
* @{
*/
#define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */
#define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
* @{
*/
#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */
#if defined(COMP1) && defined(COMP2)
#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */
#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */
#endif /* COMP1 && COMP2 */
#if defined(COMP3)
#define TIM_BREAKINPUTSOURCE_COMP3 0x00000008U /* !< The COMP3 output is connected to the break input */
#endif /* COMP3 */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
* @{
*/
#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */
#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
* @{
*/
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */
/**
* @}
*/
/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection
* @{
*/
#define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1_TI1 is connected to GPIO */
#if defined(COMP1)
#define TIM_TIM1_TI1_COMP1 0x00000001U /* !< TIM1_TI1 is connected to COMP1 OUT */
#endif /* COMP1 */
#define TIM_TIM1_TI2_GPIO 0x00000000U /* !< TIM1_TI2 is connected to GPIO */
#if defined(COMP2)
#define TIM_TIM1_TI2_COMP2 0x00000100U /* !< TIM1_TI2 is connected to COMP2 OUT */
#endif /* COMP2 */
#define TIM_TIM1_TI3_GPIO 0x00000000U /* !< TIM1_TI3 is connected to GPIO */
#if defined(COMP3)
#define TIM_TIM1_TI3_COMP3 0x00010000U /* !< TIM1_TI3 is connected to COMP3 OUT */
#endif /* COMP3 */
#if defined(TIM2)
#define TIM_TIM2_TI1_GPIO 0x00000000U /* !< TIM2_TI1 is connected to GPIO */
#define TIM_TIM2_TI1_COMP1 0x00000001U /* !< TIM2_TI1 is connected to COMP1 OUT */
#define TIM_TIM2_TI2_GPIO 0x00000000U /* !< TIM2_TI2 is connected to GPIO */
#define TIM_TIM2_TI2_COMP2 0x00000100U /* !< TIM2_TI2 is connected to COMP2 OUT */
#define TIM_TIM2_TI3_GPIO 0x00000000U /* !< TIM2_TI3 is connected to GPIO */
#if defined(COMP3)
#define TIM_TIM2_TI3_COMP3 0x00010000U /* !< TIM2_TI3 is connected to COMP3 OUT */
#endif /* COMP3 */
#endif /* TIM2 */
#define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3_TI1 is connected to GPIO */
#if defined(COMP1)
#define TIM_TIM3_TI1_COMP1 0x00000001U /* !< TIM3_TI1 is connected to COMP1 OUT */
#endif /* COMP1 */
#define TIM_TIM3_TI2_GPIO 0x00000000U /* !< TIM3_TI2 is connected to GPIO */
#if defined(COMP2)
#define TIM_TIM3_TI2_COMP2 0x00000100U /* !< TIM3_TI2 is connected to COMP2 OUT */
#endif /* COMP2 */
#define TIM_TIM3_TI3_GPIO 0x00000000U /* !< TIM3_TI3 is connected to GPIO */
#if defined(COMP3)
#define TIM_TIM3_TI3_COMP3 0x00010000U /* !< TIM3_TI3 is connected to COMP3 OUT */
#endif /* COMP3 */
#if defined(TIM4)
#define TIM_TIM4_TI1_GPIO 0x00000000U /* !< TIM4_TI1 is connected to GPIO */
#if defined(COMP1)
#define TIM_TIM4_TI1_COMP1 0x00000001U /* !< TIM4_TI1 is connected to COMP1 OUT */
#endif /* COMP1 */
#define TIM_TIM4_TI2_GPIO 0x00000000U /* !< TIM4_TI2 is connected to GPIO */
#if defined(COMP2)
#define TIM_TIM4_TI2_COMP2 0x00000100U /* !< TIM4_TI2 is connected to COMP2 OUT */
#endif /* COMP2 */
#define TIM_TIM4_TI3_GPIO 0x00000000U /* !< TIM4_TI3 is connected to GPIO */
#if defined(COMP3)
#define TIM_TIM4_TI3_COMP3 0x00010000U /* !< TIM4_TI3 is connected to COMP3 OUT */
#endif /* COMP3 */
#endif /* TIM4 */
#define TIM_TIM14_TI1_GPIO 0x00000000U /* !< TIM14_TI1 is connected to GPIO */
#define TIM_TIM14_TI1_RTC 0x00000001U /* !< TIM14_TI1 is connected to RTC clock */
#define TIM_TIM14_TI1_HSE_32 0x00000002U /* !< TIM14_TI1 is connected to HSE div 32 */
#define TIM_TIM14_TI1_MCO 0x00000003U /* !< TIM14_TI1 is connected to MCO */
#if defined(RCC_MCO2_SUPPORT)
#define TIM_TIM14_TI1_MCO2 0x00000004U /* !< TIM14_TI1 is connected to MCO2 */
#endif
#if defined(TIM15)
#define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15_TI1 is connected to GPIO */
#define TIM_TIM15_TI1_TIM2_CH1 0x00000001U /* !< TIM15_TI1 is connected to TIM2 CH1 */
#define TIM_TIM15_TI1_TIM3_CH1 0x00000002U /* !< TIM15_TI1 is connected to TIM3 CH1 */
#define TIM_TIM15_TI2_GPIO 0x00000000U /* !< TIM15_TI2 is connected to GPIO */
#define TIM_TIM15_TI2_TIM2_CH2 0x00000100U /* !< TIM15_TI2 is connected to TIM2 CH2 */
#define TIM_TIM15_TI2_TIM3_CH2 0x00000200U /* !< TIM15_TI2 is connected to TIM3 CH2 */
#endif /* TIM15 */
#define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16_TI1 is connected to GPIO */
#define TIM_TIM16_TI1_LSI 0x00000001U /* !< TIM16_TI1 is connected to LSI */
#define TIM_TIM16_TI1_LSE 0x00000002U /* !< TIM16_TI1 is connected to LSE */
#define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /* !< TIM16_TI1 is connected to TRC wakeup interrupt */
#if defined(RCC_MCO2_SUPPORT)
#define TIM_TIM16_TI1_MCO2 0x00000004U /* !< TIM16_TI1 is connected to MCO2 */
#endif
#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17_TI1 is connected to GPIO */
#if defined(RCC_HSI48_SUPPORT)
#define TIM_TIM17_TI1_HSI48 0x00000001U /* !< TIM17_TI1 is connected to HSI48/256 */
#endif
#define TIM_TIM17_TI1_HSE_32 0x00000002U /* !< TIM17_TI1 is connected to HSE div 32 */
#define TIM_TIM17_TI1_MCO 0x00000003U /* !< TIM17_TI1 is connected to MCO */
#if defined(RCC_MCO2_SUPPORT)
#define TIM_TIM17_TI1_MCO2 0x00000004U /* !< TIM17_TI1 is connected to MCO2 */
#endif
/**
* @}
*/
/**
* @}
*/
/* End of exported constants -------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
* @{
*/
/**
* @}
*/
/* End of exported macro -----------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
* @{
*/
#define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U))
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
#if defined(COMP1) && defined(COMP2) && defined(COMP3)
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP3))
#elif defined(COMP1) && defined(COMP2)
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2))
#else
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)
#endif /* COMP1 && COMP2 && COMP3 */
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U))
/**
* @}
*/
/* End of private macro ------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
* @{
*/
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
* @brief Timer Hall Sensor functions
* @{
*/
/* Timer Hall Sensor functions **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
* @brief Timer Complementary Output Compare functions
* @{
*/
/* Timer Complementary Output Compare functions *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
* @brief Timer Complementary PWM functions
* @{
*/
/* Timer Complementary PWM functions ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
* @brief Timer Complementary One Pulse functions
* @{
*/
/* Timer Complementary One Pulse functions **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
* @brief Peripheral Control functions
* @{
*/
/* Extended Control functions ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
TIM_MasterConfigTypeDef *sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
* @brief Extended Callbacks functions
* @{
*/
/* Extended Callback **********************************************************/
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
* @brief Extended Peripheral State functions
* @{
*/
/* Extended Peripheral State functions ***************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN);
/**
* @}
*/
/**
* @}
*/
/* End of exported functions -------------------------------------------------*/
/* Private functions----------------------------------------------------------*/
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* End of private functions --------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1718
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h
View File

File diff suppressed because it is too large Load Diff

770
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h
View File

@ -1,770 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_uart_ex.h
* @author MCD Application Team
* @brief Header file of UART HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_UART_EX_H
#define STM32G0xx_HAL_UART_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup UARTEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
* @{
*/
/**
* @brief UART wake up from stop mode parameters
*/
typedef struct
{
uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF).
This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
be filled up. */
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */
uint8_t Address; /*!< UART/USART node address (7-bit long max). */
} UART_WakeUpTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
*/
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */
#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */
#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */
/**
* @}
*/
/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
* @{
*/
#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */
#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */
/**
* @}
*/
/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode
* @brief UART FIFO mode
* @{
*/
#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */
/**
* @}
*/
/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level
* @brief UART TXFIFO threshold level
* @{
*/
#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */
#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */
#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */
#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */
#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */
#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */
/**
* @}
*/
/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level
* @brief UART RXFIFO threshold level
* @{
*/
#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */
#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */
#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */
#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */
#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */
#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UARTEx_Exported_Functions
* @{
*/
/** @addtogroup UARTEx_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
uint32_t DeassertionTime);
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
* @{
*/
void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions **********************************************/
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
* @{
*/
#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
switch(__HAL_RCC_GET_USART3_SOURCE()) \
{ \
case RCC_USART3CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART3CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART3CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART3CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART5) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART6) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == LPUART1) \
{ \
switch(__HAL_RCC_GET_LPUART1_SOURCE()) \
{ \
case RCC_LPUART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_LPUART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_LPUART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_LPUART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == LPUART2) \
{ \
switch(__HAL_RCC_GET_LPUART2_SOURCE()) \
{ \
case RCC_LPUART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_LPUART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_LPUART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_LPUART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#elif defined(STM32G0B0xx)
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
switch(__HAL_RCC_GET_USART3_SOURCE()) \
{ \
case RCC_USART3CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART3CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART3CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART3CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART5) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART6) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#elif defined(STM32G081xx) || defined(STM32G071xx)
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == LPUART1) \
{ \
switch(__HAL_RCC_GET_LPUART1_SOURCE()) \
{ \
case RCC_LPUART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_LPUART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_LPUART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_LPUART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#elif defined(STM32G070xx)
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#elif defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G051xx) || defined(STM32G061xx)
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == LPUART1) \
{ \
switch(__HAL_RCC_GET_LPUART1_SOURCE()) \
{ \
case RCC_LPUART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_LPUART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_LPUART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_LPUART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#elif defined(STM32G030xx) || defined(STM32G050xx)
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#endif
/** @brief Report the UART mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
* @note If PCE = 1, the parity bit is not included in the data extracted
* by the reception API().
* This masking operation is not carried out in the case of
* DMA transfers.
* @param __HANDLE__ specifies the UART Handle.
* @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
*/
#define UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x01FFU ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x00FFU ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x00FFU ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x007FU ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x007FU ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x003FU ; \
} \
} \
else \
{ \
(__HANDLE__)->Mask = 0x0000U; \
} \
} while(0U)
/**
* @brief Ensure that UART frame length is valid.
* @param __LENGTH__ UART frame length.
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
*/
#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
((__LENGTH__) == UART_WORDLENGTH_8B) || \
((__LENGTH__) == UART_WORDLENGTH_9B))
/**
* @brief Ensure that UART wake-up address length is valid.
* @param __ADDRESS__ UART wake-up address length.
* @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid)
*/
#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
/**
* @brief Ensure that UART TXFIFO threshold level is valid.
* @param __THRESHOLD__ UART TXFIFO threshold level.
* @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid)
*/
#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8))
/**
* @brief Ensure that UART RXFIFO threshold level is valid.
* @param __THRESHOLD__ UART RXFIFO threshold level.
* @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid)
*/
#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_UART_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2272
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h
View File

File diff suppressed because it is too large Load Diff

1828
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h
View File

File diff suppressed because it is too large Load Diff

3886
Legacy/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h
View File

File diff suppressed because it is too large Load Diff

759
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c
View File

@ -1,759 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal.c
* @author MCD Application Team
* @brief HAL module driver.
* This is the common part of the HAL initialization
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The common HAL driver contains a set of generic and common APIs that can be
used by the PPP peripheral drivers and the user to start using the HAL.
[..]
The HAL contains two APIs categories:
(+) Common HAL APIs
(+) Services HAL APIs
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup HAL
* @brief HAL module driver
* @{
*/
#ifdef HAL_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup HAL_Private_Constants HAL Private Constants
* @{
*/
/**
* @brief STM32G0xx HAL Driver version number
*/
#define __STM32G0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32G0xx_HAL_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */
#define __STM32G0xx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
#define __STM32G0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32G0xx_HAL_VERSION ((__STM32G0xx_HAL_VERSION_MAIN << 24U)\
|(__STM32G0xx_HAL_VERSION_SUB1 << 16U)\
|(__STM32G0xx_HAL_VERSION_SUB2 << 8U )\
|(__STM32G0xx_HAL_VERSION_RC))
#if defined(VREFBUF)
#define VREFBUF_TIMEOUT_VALUE 10U /*!< 10 ms */
#endif /* VREFBUF */
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Exported variables ---------------------------------------------------------*/
/** @defgroup HAL_Exported_Variables HAL Exported Variables
* @{
*/
__IO uint32_t uwTick;
uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup HAL_Exported_Functions
* @{
*/
/** @addtogroup HAL_Exported_Functions_Group1
* @brief HAL Initialization and Configuration functions
*
@verbatim
===============================================================================
##### HAL Initialization and Configuration functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize the Flash interface the NVIC allocation and initial time base
clock configuration.
(+) De-initialize common part of the HAL.
(+) Configure the time base source to have 1ms time base with a dedicated
Tick interrupt priority.
(++) SysTick timer is used by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
(++) Time base configuration function (HAL_InitTick ()) is called automatically
at the beginning of the program after reset by HAL_Init() or at any time
when clock is configured, by HAL_RCC_ClockConfig().
(++) Source of time base is configured to generate interrupts at regular
time intervals. Care must be taken if HAL_Delay() is called from a
peripheral ISR process, the Tick interrupt line must have higher priority
(numerically lower) than the peripheral interrupt. Otherwise the caller
ISR process will be blocked.
(++) functions affecting time base configurations are declared as __weak
to make override possible in case of other implementations in user file.
@endverbatim
* @{
*/
/**
* @brief Configure the Flash prefetch and the Instruction cache,
* the time base source, NVIC and any required global low level hardware
* by calling the HAL_MspInit() callback function to be optionally defined in user file
* stm32g0xx_hal_msp.c.
*
* @note HAL_Init() function is called at the beginning of program after reset and before
* the clock configuration.
*
* @note In the default implementation the System Timer (Systick) is used as source of time base.
* The Systick configuration is based on HSI clock, as HSI is the clock
* used after a system Reset.
* Once done, time base tick starts incrementing: the tick variable counter is incremented
* each 1ms in the SysTick_Handler() interrupt handler.
*
* @retval HAL status
*/
HAL_StatusTypeDef HAL_Init(void)
{
HAL_StatusTypeDef status = HAL_OK;
/* Configure Flash prefetch, Instruction cache */
/* Default configuration at reset is: */
/* - Prefetch disabled */
/* - Instruction cache enabled */
#if (INSTRUCTION_CACHE_ENABLE == 0U)
__HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
#endif /* INSTRUCTION_CACHE_ENABLE */
#if (PREFETCH_ENABLE != 0U)
__HAL_FLASH_PREFETCH_BUFFER_ENABLE();
#endif /* PREFETCH_ENABLE */
/* Use SysTick as time base source and configure 1ms tick (default clock after Reset is HSI) */
if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
{
status = HAL_ERROR;
}
else
{
/* Init the low level hardware */
HAL_MspInit();
}
/* Return function status */
return status;
}
/**
* @brief This function de-Initializes common part of the HAL and stops the source of time base.
* @note This function is optional.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DeInit(void)
{
/* Reset of all peripherals */
__HAL_RCC_APB1_FORCE_RESET();
__HAL_RCC_APB1_RELEASE_RESET();
__HAL_RCC_APB2_FORCE_RESET();
__HAL_RCC_APB2_RELEASE_RESET();
__HAL_RCC_AHB_FORCE_RESET();
__HAL_RCC_AHB_RELEASE_RESET();
__HAL_RCC_IOP_FORCE_RESET();
__HAL_RCC_IOP_RELEASE_RESET();
/* De-Init the low level hardware */
HAL_MspDeInit();
/* Return function status */
return HAL_OK;
}
/**
* @brief Initialize the MSP.
* @retval None
*/
__weak void HAL_MspInit(void)
{
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MspInit could be implemented in the user file
*/
}
/**
* @brief DeInitializes the MSP.
* @retval None
*/
__weak void HAL_MspDeInit(void)
{
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MspDeInit could be implemented in the user file
*/
}
/**
* @brief This function configures the source of the time base:
* The time source is configured to have 1ms time base with a dedicated
* Tick interrupt priority.
* @note This function is called automatically at the beginning of program after
* reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
* @note In the default implementation, SysTick timer is the source of time base.
* It is used to generate interrupts at regular time intervals.
* Care must be taken if HAL_Delay() is called from a peripheral ISR process,
* The SysTick interrupt must have higher priority (numerically lower)
* than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
* The function is declared as __weak to be overwritten in case of other
* implementation in user file.
* @param TickPriority Tick interrupt priority.
* @retval HAL status
*/
__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/
if ((uint32_t)uwTickFreq != 0U)
{
/*Configure the SysTick to have interrupt in 1ms time basis*/
if (HAL_SYSTICK_Config(SystemCoreClock / (1000U /(uint32_t)uwTickFreq)) == 0U)
{
/* Configure the SysTick IRQ priority */
if (TickPriority < (1UL << __NVIC_PRIO_BITS))
{
HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
uwTickPrio = TickPriority;
}
else
{
status = HAL_ERROR;
}
}
else
{
status = HAL_ERROR;
}
}
else
{
status = HAL_ERROR;
}
/* Return function status */
return status;
}
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group2
* @brief HAL Control functions
*
@verbatim
===============================================================================
##### HAL Control functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Provide a tick value in millisecond
(+) Provide a blocking delay in millisecond
(+) Suspend the time base source interrupt
(+) Resume the time base source interrupt
(+) Get the HAL API driver version
(+) Get the device identifier
(+) Get the device revision identifier
@endverbatim
* @{
*/
/**
* @brief This function is called to increment a global variable "uwTick"
* used as application time base.
* @note In the default implementation, this variable is incremented each 1ms
* in SysTick ISR.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void HAL_IncTick(void)
{
uwTick += (uint32_t)uwTickFreq;
}
/**
* @brief Provides a tick value in millisecond.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval tick value
*/
__weak uint32_t HAL_GetTick(void)
{
return uwTick;
}
/**
* @brief This function returns a tick priority.
* @retval tick priority
*/
uint32_t HAL_GetTickPrio(void)
{
return uwTickPrio;
}
/**
* @brief Set new tick Freq.
* @retval status
*/
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
{
HAL_StatusTypeDef status = HAL_OK;
HAL_TickFreqTypeDef prevTickFreq;
assert_param(IS_TICKFREQ(Freq));
if (uwTickFreq != Freq)
{
/* Back up uwTickFreq frequency */
prevTickFreq = uwTickFreq;
/* Update uwTickFreq global variable used by HAL_InitTick() */
uwTickFreq = Freq;
/* Apply the new tick Freq */
status = HAL_InitTick(uwTickPrio);
if (status != HAL_OK)
{
/* Restore previous tick frequency */
uwTickFreq = prevTickFreq;
}
}
return status;
}
/**
* @brief return tick frequency.
* @retval tick period in Hz
*/
HAL_TickFreqTypeDef HAL_GetTickFreq(void)
{
return uwTickFreq;
}
/**
* @brief This function provides minimum delay (in milliseconds) based
* on variable incremented.
* @note In the default implementation , SysTick timer is the source of time base.
* It is used to generate interrupts at regular time intervals where uwTick
* is incremented.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @param Delay specifies the delay time length, in milliseconds.
* @retval None
*/
__weak void HAL_Delay(uint32_t Delay)
{
uint32_t tickstart = HAL_GetTick();
uint32_t wait = Delay;
/* Add a freq to guarantee minimum wait */
if (wait < HAL_MAX_DELAY)
{
wait += (uint32_t)(uwTickFreq);
}
while ((HAL_GetTick() - tickstart) < wait)
{
}
}
/**
* @brief Suspend Tick increment.
* @note In the default implementation , SysTick timer is the source of time base. It is
* used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
* is called, the SysTick interrupt will be disabled and so Tick increment
* is suspended.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void HAL_SuspendTick(void)
{
/* Disable SysTick Interrupt */
CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Resume Tick increment.
* @note In the default implementation , SysTick timer is the source of time base. It is
* used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
* is called, the SysTick interrupt will be enabled and so Tick increment
* is resumed.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void HAL_ResumeTick(void)
{
/* Enable SysTick Interrupt */
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Returns the HAL revision
* @retval version : 0xXYZR (8bits for each decimal, R for RC)
*/
uint32_t HAL_GetHalVersion(void)
{
return __STM32G0xx_HAL_VERSION;
}
/**
* @brief Returns the device revision identifier.
* @retval Device revision identifier
*/
uint32_t HAL_GetREVID(void)
{
return ((DBG->IDCODE & DBG_IDCODE_REV_ID) >> 16U);
}
/**
* @brief Returns the device identifier.
* @retval Device identifier
*/
uint32_t HAL_GetDEVID(void)
{
return ((DBG->IDCODE) & DBG_IDCODE_DEV_ID);
}
/**
* @brief Returns first word of the unique device identifier (UID based on 96 bits)
* @retval Device identifier
*/
uint32_t HAL_GetUIDw0(void)
{
return (READ_REG(*((uint32_t *)UID_BASE)));
}
/**
* @brief Returns second word of the unique device identifier (UID based on 96 bits)
* @retval Device identifier
*/
uint32_t HAL_GetUIDw1(void)
{
return (READ_REG(*((uint32_t *)(UID_BASE + 4U))));
}
/**
* @brief Returns third word of the unique device identifier (UID based on 96 bits)
* @retval Device identifier
*/
uint32_t HAL_GetUIDw2(void)
{
return (READ_REG(*((uint32_t *)(UID_BASE + 8U))));
}
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group3
* @brief HAL Debug functions
*
@verbatim
===============================================================================
##### HAL Debug functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Enable/Disable Debug module during STOP mode
(+) Enable/Disable Debug module during STANDBY mode
@endverbatim
* @{
*/
/**
* @brief Enable the Debug Module during STOP mode
* @retval None
*/
void HAL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBG->CR, DBG_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @retval None
*/
void HAL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP);
}
/**
* @brief Enable the Debug Module during STANDBY mode
* @retval None
*/
void HAL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY);
}
/**
* @brief Disable the Debug Module during STANDBY mode
* @retval None
*/
void HAL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY);
}
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group4
* @brief SYSCFG configuration functions
*
@verbatim
===============================================================================
##### HAL SYSCFG configuration functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Enable/Disable Pin remap
(+) Configure the Voltage reference buffer
(+) Enable/Disable the Voltage reference buffer
(+) Enable/Disable the I/O analog switch voltage booster
(+) Enable/Disable dead battery behavior(*)
(+) Configure Clamping Diode on specific pins(*)
(*) Feature not available on all devices
@endverbatim
* @{
*/
#if defined(VREFBUF)
/**
* @brief Configure the internal voltage reference buffer voltage scale.
* @param VoltageScaling specifies the output voltage to achieve
* This parameter can be one of the following values:
* @arg @ref SYSCFG_VREFBUF_VoltageScale
* @retval None
*/
void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling)
{
/* Check the parameters */
assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling));
MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling);
}
/**
* @brief Configure the internal voltage reference buffer high impedance mode.
* @param Mode specifies the high impedance mode
* This parameter can be one of the following values:
* @arg @ref SYSCFG_VREFBUF_HighImpedance
* @retval None
*/
void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode)
{
/* Check the parameters */
assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode));
MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode);
}
/**
* @brief Tune the Internal Voltage Reference buffer (VREFBUF).
* @note VrefBuf voltage scale is calibrated in production for each device,
* using voltage scale 1. This calibration value is loaded
* as default trimming value at device power up.
* This trimming value can be fine tuned for voltage scales 0 and 1
* using this function.
* @retval None
*/
void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue)
{
/* Check the parameters */
assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue));
MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue);
}
/**
* @brief Enable the Internal Voltage Reference buffer (VREFBUF).
* @retval HAL_OK/HAL_TIMEOUT
*/
HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void)
{
uint32_t tickstart;
SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait for VRR bit */
while (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0x00U)
{
if ((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Disable the Internal Voltage Reference buffer (VREFBUF).
*
* @retval None
*/
void HAL_SYSCFG_DisableVREFBUF(void)
{
CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
}
#endif /* VREFBUF */
/**
* @brief Enable the I/O analog switch voltage booster
* @retval None
*/
void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
}
/**
* @brief Disable the I/O analog switch voltage booster
* @retval None
*/
void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
}
/**
* @brief Enable the remap on PA11_PA12
* @param PinRemap specifies which pins have to be remapped
* This parameter can be any combination of the following values:
* @arg @ref SYSCFG_REMAP_PA11
* @arg @ref SYSCFG_REMAP_PA12
* @retval None
*/
void HAL_SYSCFG_EnableRemap(uint32_t PinRemap)
{
/* Check the parameter */
assert_param(IS_HAL_REMAP_PIN(PinRemap));
SET_BIT(SYSCFG->CFGR1, PinRemap);
}
/**
* @brief Disable the remap on PA11_PA12
* @param PinRemap specifies which pins will behave normally
* This parameter can be any combination of the following values:
* @arg @ref SYSCFG_REMAP_PA11
* @arg @ref SYSCFG_REMAP_PA12
* @retval None
*/
void HAL_SYSCFG_DisableRemap(uint32_t PinRemap)
{
/* Check the parameter */
assert_param(IS_HAL_REMAP_PIN(PinRemap));
CLEAR_BIT(SYSCFG->CFGR1, PinRemap);
}
#if defined(SYSCFG_CDEN_SUPPORT)
/**
* @brief Enable Clamping Diode on specified IO
* @param PinConfig specifies on which pins clamping Diode has to be enabled
* This parameter can be any combination of the following values:
* @arg @ref SYSCFG_ClampingDiode
* @retval None
*/
void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig)
{
/* Check the parameter */
assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig));
SET_BIT(SYSCFG->CFGR2, PinConfig);
}
/**
* @brief Disable Clamping Diode on specified IO
* @param PinConfig specifies on which pins clamping Diode has to be disabled
* This parameter can be any combination of the following values:
* @arg @ref SYSCFG_ClampingDiode
* @retval None
*/
void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig)
{
/* Check the parameter */
assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig));
CLEAR_BIT(SYSCFG->CFGR2, PinConfig);
}
#endif /* SYSCFG_CDEN_SUPPORT */
#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE)
/**
* @brief Strobe configuration of GPIO depending on UCPDx dead battery settings
* @param ConfigDeadBattery specifies on which pins to make effective or not Dead Battery sw configuration
* This parameter can be any combination of the following values:
* @arg @ref SYSCFG_UCPD1_STROBE
* @arg @ref SYSCFG_UCPD2_STROBE
* @retval None
*/
void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery)
{
assert_param(IS_SYSCFG_DBATT_CONFIG(ConfigDeadBattery));
/* Change strobe configuration of GPIO depending on UCPDx dead battery settings */
MODIFY_REG(SYSCFG->CFGR1, (SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE), ConfigDeadBattery);
}
#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

417
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c
View File

@ -1,417 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_cortex.c
* @author MCD Application Team
* @brief CORTEX HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the CORTEX:
* + Initialization and Configuration functions
* + Peripheral Control functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
*** How to configure Interrupts using CORTEX HAL driver ***
===========================================================
[..]
This section provides functions allowing to configure the NVIC interrupts (IRQ).
The Cortex M0+ exceptions are managed by CMSIS functions.
(#) Enable and Configure the priority of the selected IRQ Channels.
The priority can be 0..3.
-@- Lower priority values gives higher priority.
-@- Priority Order:
(#@) Lowest priority.
(#@) Lowest hardware priority (IRQn position).
(#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
(#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
-@- Negative value of IRQn_Type are not allowed.
*** How to configure Systick using CORTEX HAL driver ***
========================================================
[..]
Setup SysTick Timer for time base.
(+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
is a CMSIS function that:
(++) Configures the SysTick Reload register with value passed as function parameter.
(++) Configures the SysTick IRQ priority to the lowest value (0x03).
(++) Resets the SysTick Counter register.
(++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
(++) Enables the SysTick Interrupt.
(++) Starts the SysTick Counter.
(+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
__HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
inside the stm32g0xx_hal_cortex.h file.
(+) You can change the SysTick IRQ priority by calling the
HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
(+) To adjust the SysTick time base, use the following formula:
Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
(++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
(++) Reload Value should not exceed 0xFFFFFF
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup CORTEX
* @{
*/
#ifdef HAL_CORTEX_MODULE_ENABLED
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CORTEX_Exported_Functions
* @{
*/
/** @addtogroup CORTEX_Exported_Functions_Group1
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and Configuration functions #####
==============================================================================
[..]
This section provides the CORTEX HAL driver functions allowing to configure Interrupts
Systick functionalities
@endverbatim
* @{
*/
/**
* @brief Sets the priority of an interrupt.
* @param IRQn External interrupt number .
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32g0xx.h file)
* @param PreemptPriority The preemption priority for the IRQn channel.
* This parameter can be a value between 0 and 3.
* A lower priority value indicates a higher priority
* @param SubPriority the subpriority level for the IRQ channel.
* with stm32g0xx devices, this parameter is a dummy value and it is ignored, because
* no subpriority supported in Cortex M0+ based products.
* @retval None
*/
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
{
/* Check the parameters */
assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
NVIC_SetPriority(IRQn,PreemptPriority);
}
/**
* @brief Enable a device specific interrupt in the NVIC interrupt controller.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h))
* @retval None
*/
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Enable interrupt */
NVIC_EnableIRQ(IRQn);
}
/**
* @brief Disable a device specific interrupt in the NVIC interrupt controller.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h))
* @retval None
*/
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Disable interrupt */
NVIC_DisableIRQ(IRQn);
}
/**
* @brief Initiate a system reset request to reset the MCU.
* @retval None
*/
void HAL_NVIC_SystemReset(void)
{
/* System Reset */
NVIC_SystemReset();
}
/**
* @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick):
* Counter is in free running mode to generate periodic interrupts.
* @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
* @retval status: - 0 Function succeeded.
* - 1 Function failed.
*/
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
{
return SysTick_Config(TicksNumb);
}
/**
* @}
*/
/** @addtogroup CORTEX_Exported_Functions_Group2
* @brief Cortex control functions
*
@verbatim
==============================================================================
##### Peripheral Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control the CORTEX
(NVIC, SYSTICK, MPU) functionalities.
@endverbatim
* @{
*/
/**
* @brief Get the priority of an interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h))
* @retval None
*/
uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
{
/* Get priority for Cortex-M system or device specific interrupts */
return NVIC_GetPriority(IRQn);
}
/**
* @brief Set Pending bit of an external interrupt.
* @param IRQn External interrupt number
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h))
* @retval None
*/
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Set interrupt pending */
NVIC_SetPendingIRQ(IRQn);
}
/**
* @brief Get Pending Interrupt (read the pending register in the NVIC
* and return the pending bit for the specified interrupt).
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h))
* @retval status: - 0 Interrupt status is not pending.
* - 1 Interrupt status is pending.
*/
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Return 1 if pending else 0 */
return NVIC_GetPendingIRQ(IRQn);
}
/**
* @brief Clear the pending bit of an external interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h))
* @retval None
*/
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Clear pending interrupt */
NVIC_ClearPendingIRQ(IRQn);
}
/**
* @brief Configure the SysTick clock source.
* @param CLKSource specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
{
SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
}
else
{
SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
}
}
/**
* @brief Handle SYSTICK interrupt request.
* @retval None
*/
void HAL_SYSTICK_IRQHandler(void)
{
HAL_SYSTICK_Callback();
}
/**
* @brief SYSTICK callback.
* @retval None
*/
__weak void HAL_SYSTICK_Callback(void)
{
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_SYSTICK_Callback could be implemented in the user file
*/
}
#if (__MPU_PRESENT == 1U)
/**
* @brief Enable the MPU.
* @param MPU_Control Specifies the control mode of the MPU during hard fault,
* NMI, FAULTMASK and privileged access to the default memory
* This parameter can be one of the following values:
* @arg MPU_HFNMI_PRIVDEF_NONE
* @arg MPU_HARDFAULT_NMI
* @arg MPU_PRIVILEGED_DEFAULT
* @arg MPU_HFNMI_PRIVDEF
* @retval None
*/
void HAL_MPU_Enable(uint32_t MPU_Control)
{
/* Enable the MPU */
MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk);
/* Ensure MPU setting take effects */
__DSB();
__ISB();
}
/**
* @brief Disable the MPU.
* @retval None
*/
void HAL_MPU_Disable(void)
{
/* Make sure outstanding transfers are done */
__DMB();
/* Disable the MPU and clear the control register*/
MPU->CTRL = 0;
}
/**
* @brief Initialize and configure the Region and the memory to be protected.
* @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
* the initialization and configuration information.
* @retval None
*/
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
{
/* Check the parameters */
assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
/* Set the Region number */
MPU->RNR = MPU_Init->Number;
if ((MPU_Init->Enable) != 0U)
{
/* Check the parameters */
assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
MPU->RBAR = MPU_Init->BaseAddress;
MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
}
else
{
MPU->RBAR = 0x00U;
MPU->RASR = 0x00U;
}
}
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_CORTEX_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1192
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c
View File

File diff suppressed because it is too large Load Diff

320
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c
View File

@ -1,320 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_dma_ex.c
* @author MCD Application Team
* @brief DMA Extension HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the DMA Extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The DMA Extension HAL driver can be used as follows:
(+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
(+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
to respectively enable/disable the request generator.
(+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from
the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler.
As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be
called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project
(exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator)
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup DMAEx DMAEx
* @brief DMA Extended HAL module driver
* @{
*/
#ifdef HAL_DMA_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private Constants ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
* @{
*/
/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
(+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
to respectively enable/disable the request generator.
(+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from
the DMAMUX IRQ handler
@endverbatim
* @{
*/
/**
* @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance).
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @param pSyncConfig Pointer to HAL_DMA_MuxSyncConfigTypeDef contains the DMAMUX synchronization parameters
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID));
assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity));
assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable));
assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable));
assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber));
/*Check if the DMA state is ready */
if (hdma->State == HAL_DMA_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hdma);
/* Set the new synchronization parameters (and keep the request ID filled during the Init)*/
MODIFY_REG(hdma->DMAmuxChannel->CCR, \
(~DMAMUX_CxCR_DMAREQ_ID), \
(pSyncConfig->SyncSignalID | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \
pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \
((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos)));
/* Process UnLocked */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
else
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
/* Return error status */
return HAL_ERROR;
}
}
/**
* @brief Configure the DMAMUX request generator block used by the given DMA channel (instance).
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @param pRequestGeneratorConfig Pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef
* contains the request generator parameters.
*
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
{
HAL_StatusTypeDef status;
HAL_DMA_StateTypeDef temp_state = hdma->State;
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID));
assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity));
assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if (hdma->DMAmuxRequestGen == 0U)
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
/* error status */
status = HAL_ERROR;
}
else if (((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY))
{
/* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */
/* Process Locked */
__HAL_LOCK(hdma);
/* Set the request generator new parameters*/
hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \
((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \
pRequestGeneratorConfig->Polarity;
/* Process UnLocked */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
else
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
/* error status */
status = HAL_ERROR;
}
return status;
}
/**
* @brief Enable the DMAMUX request generator block used by the given DMA channel (instance).
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
{
/* Enable the request generator*/
hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE;
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Disable the DMAMUX request generator block used by the given DMA channel (instance).
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
{
/* Disable the request generator*/
hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE;
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Handles DMAMUX interrupt request.
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @retval None
*/
void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma)
{
/* Check for DMAMUX Synchronization overrun */
if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
{
/* Disable the synchro overrun interrupt */
hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE;
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_SYNC;
if (hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
if (hdma->DMAmuxRequestGen != 0)
{
/* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
{
/* Disable the request gen overrun interrupt */
hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE;
/* Clear the DMAMUX request generator overrun flag */
hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN;
if (hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
}
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_DMA_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

681
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c
View File

@ -1,681 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_exti.c
* @author MCD Application Team
* @brief EXTI HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (EXTI) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
*
@verbatim
==============================================================================
##### EXTI Peripheral features #####
==============================================================================
[..]
(+) Each Exti line can be configured within this driver.
(+) Exti line can be configured in 3 different modes
(++) Interrupt
(++) Event
(++) Both of them
(+) Configurable Exti lines can be configured with 3 different triggers
(++) Rising
(++) Falling
(++) Both of them
(+) When set in interrupt mode, configurable Exti lines have two diffenrents
interrupt pending registers which allow to distinguish which transition
occurs:
(++) Rising edge pending interrupt
(++) Falling
(+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
be selected through multiplexer.
##### How to use this driver #####
==============================================================================
[..]
(#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
(++) Choose the interrupt line number by setting "Line" member from
EXTI_ConfigTypeDef structure.
(++) Configure the interrupt and/or event mode using "Mode" member from
EXTI_ConfigTypeDef structure.
(++) For configurable lines, configure rising and/or falling trigger
"Trigger" member from EXTI_ConfigTypeDef structure.
(++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
member from GPIO_InitTypeDef structure.
(#) Get current Exti configuration of a dedicated line using
HAL_EXTI_GetConfigLine().
(++) Provide exiting handle as parameter.
(++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
(#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
(++) Provide exiting handle as parameter.
(#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
(++) Provide exiting handle as first parameter.
(++) Provide which callback will be registered using one value from
EXTI_CallbackIDTypeDef.
(++) Provide callback function pointer.
(#) Get interrupt pending bit using HAL_EXTI_GetPending().
(#) Clear interrupt pending bit using HAL_EXTI_GetPending().
(#) Generate software interrupt using HAL_EXTI_GenerateSWI().
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup EXTI
* @{
*/
/** MISRA C:2012 deviation rule has been granted for following rule:
* Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
* of bounds [0,3] in following API :
* HAL_EXTI_SetConfigLine
* HAL_EXTI_GetConfigLine
* HAL_EXTI_ClearConfigLine
*/
#ifdef HAL_EXTI_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private defines ------------------------------------------------------------*/
/** @defgroup EXTI_Private_Constants EXTI Private Constants
* @{
*/
#define EXTI_MODE_OFFSET 0x04u /* 0x10: offset between CPU IMR/EMR registers */
#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between CPU Rising/Falling configuration registers */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup EXTI_Exported_Functions
* @{
*/
/** @addtogroup EXTI_Exported_Functions_Group1
* @brief Configuration functions
*
@verbatim
===============================================================================
##### Configuration functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Set configuration of a dedicated Exti line.
* @param hexti Exti handle.
* @param pExtiConfig Pointer on EXTI configuration to be set.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
/* Check null pointer */
if ((hexti == NULL) || (pExtiConfig == NULL))
{
return HAL_ERROR;
}
/* Check parameters */
assert_param(IS_EXTI_LINE(pExtiConfig->Line));
assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
/* Assign line number to handle */
hexti->Line = pExtiConfig->Line;
/* compute line register offset and line mask */
offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* Configure triggers for configurable lines */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
{
assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
/* Configure rising trigger */
regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store rising trigger mode */
*regaddr = regval;
/* Configure falling trigger */
regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store falling trigger mode */
*regaddr = regval;
/* Configure gpio port selection in case of gpio exti line */
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = EXTI->EXTICR[linepos >> 2u];
regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
regval |= (pExtiConfig->GPIOSel << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
EXTI->EXTICR[linepos >> 2u] = regval;
}
}
/* Configure interrupt mode : read current mode */
regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store interrupt mode */
*regaddr = regval;
/* Configure event mode : read current mode */
regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store event mode */
*regaddr = regval;
return HAL_OK;
}
/**
* @brief Get configuration of a dedicated Exti line.
* @param hexti Exti handle.
* @param pExtiConfig Pointer on structure to store Exti configuration.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
/* Check null pointer */
if ((hexti == NULL) || (pExtiConfig == NULL))
{
return HAL_ERROR;
}
/* Check the parameter */
assert_param(IS_EXTI_LINE(hexti->Line));
/* Store handle line number to configiguration structure */
pExtiConfig->Line = hexti->Line;
/* compute line register offset and line mask */
offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* 1] Get core mode : interrupt */
regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Check if selected line is enable */
if ((regval & maskline) != 0x00u)
{
pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
}
else
{
pExtiConfig->Mode = EXTI_MODE_NONE;
}
/* Get event mode */
regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Check if selected line is enable */
if ((regval & maskline) != 0x00u)
{
pExtiConfig->Mode |= EXTI_MODE_EVENT;
}
/* 2] Get trigger for configurable lines : rising */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
{
regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Check if configuration of selected line is enable */
if ((regval & maskline) != 0x00u)
{
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
}
else
{
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
}
/* Get falling configuration */
regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Check if configuration of selected line is enable */
if ((regval & maskline) != 0x00u)
{
pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
}
/* Get Gpio port selection for gpio lines */
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = EXTI->EXTICR[linepos >> 2u];
pExtiConfig->GPIOSel = ((regval << (EXTI_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
}
else
{
pExtiConfig->GPIOSel = 0x00u;
}
}
else
{
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
pExtiConfig->GPIOSel = 0x00u;
}
return HAL_OK;
}
/**
* @brief Clear whole configuration of a dedicated Exti line.
* @param hexti Exti handle.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
/* Check null pointer */
if (hexti == NULL)
{
return HAL_ERROR;
}
/* Check the parameter */
assert_param(IS_EXTI_LINE(hexti->Line));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (hexti->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* 1] Clear interrupt mode */
regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
/* 2] Clear event mode */
regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
/* 3] Clear triggers in case of configurable lines */
if ((hexti->Line & EXTI_CONFIG) != 0x00u)
{
regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
/* Get Gpio port selection for gpio lines */
if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = EXTI->EXTICR[linepos >> 2u];
regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
EXTI->EXTICR[linepos >> 2u] = regval;
}
}
return HAL_OK;
}
/**
* @brief Register callback for a dedicaated Exti line.
* @param hexti Exti handle.
* @param CallbackID User callback identifier.
* This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
* @param pPendingCbfn function pointer to be stored as callback.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
{
HAL_StatusTypeDef status = HAL_OK;
switch (CallbackID)
{
case HAL_EXTI_COMMON_CB_ID:
hexti->RisingCallback = pPendingCbfn;
hexti->FallingCallback = pPendingCbfn;
break;
case HAL_EXTI_RISING_CB_ID:
hexti->RisingCallback = pPendingCbfn;
break;
case HAL_EXTI_FALLING_CB_ID:
hexti->FallingCallback = pPendingCbfn;
break;
default:
status = HAL_ERROR;
break;
}
return status;
}
/**
* @brief Store line number as handle private field.
* @param hexti Exti handle.
* @param ExtiLine Exti line number.
* This parameter can be from 0 to @ref EXTI_LINE_NB.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(ExtiLine));
/* Check null pointer */
if (hexti == NULL)
{
return HAL_ERROR;
}
else
{
/* Store line number as handle private field */
hexti->Line = ExtiLine;
return HAL_OK;
}
}
/**
* @}
*/
/** @addtogroup EXTI_Exported_Functions_Group2
* @brief EXTI IO functions.
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Handle EXTI interrupt request.
* @param hexti Exti handle.
* @retval none.
*/
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t maskline;
uint32_t offset;
/* Compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
/* Get rising edge pending bit */
regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset));
regval = (*regaddr & maskline);
if (regval != 0x00u)
{
/* Clear pending bit */
*regaddr = maskline;
/* Call rising callback */
if (hexti->RisingCallback != NULL)
{
hexti->RisingCallback();
}
}
/* Get falling edge pending bit */
regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset));
regval = (*regaddr & maskline);
if (regval != 0x00u)
{
/* Clear pending bit */
*regaddr = maskline;
/* Call rising callback */
if (hexti->FallingCallback != NULL)
{
hexti->FallingCallback();
}
}
}
/**
* @brief Get interrupt pending bit of a dedicated line.
* @param hexti Exti handle.
* @param Edge Specify which pending edge as to be checked.
* This parameter can be one of the following values:
* @arg @ref EXTI_TRIGGER_RISING
* @arg @ref EXTI_TRIGGER_FALLING
* @retval 1 if interrupt is pending else 0.
*/
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
assert_param(IS_EXTI_PENDING_EDGE(Edge));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (hexti->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
if (Edge != EXTI_TRIGGER_RISING)
{
/* Get falling edge pending bit */
regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset));
}
else
{
/* Get rising edge pending bit */
regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset));
}
/* return 1 if bit is set else 0 */
regval = ((*regaddr & maskline) >> linepos);
return regval;
}
/**
* @brief Clear interrupt pending bit of a dedicated line.
* @param hexti Exti handle.
* @param Edge Specify which pending edge as to be clear.
* This parameter can be one of the following values:
* @arg @ref EXTI_TRIGGER_RISING
* @arg @ref EXTI_TRIGGER_FALLING
* @retval None.
*/
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
{
__IO uint32_t *regaddr;
uint32_t maskline;
uint32_t offset;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
assert_param(IS_EXTI_PENDING_EDGE(Edge));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
if (Edge != EXTI_TRIGGER_RISING)
{
/* Get falling edge pending register address */
regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset));
}
else
{
/* Get falling edge pending register address */
regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset));
}
/* Clear Pending bit */
*regaddr = maskline;
}
/**
* @brief Generate a software interrupt for a dedicated line.
* @param hexti Exti handle.
* @retval None.
*/
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t maskline;
uint32_t offset;
/* Check parameterd */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset));
*regaddr = maskline;
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_EXTI_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

719
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c
View File

@ -1,719 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_flash.c
* @author MCD Application Team
* @brief FLASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the internal FLASH memory:
* + Program operations functions
* + Memory Control functions
* + Peripheral Errors functions
*
@verbatim
==============================================================================
##### FLASH peripheral features #####
==============================================================================
[..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
to the Flash memory. It implements the erase and program Flash memory operations
and the read and write protection mechanisms.
[..] The Flash memory interface accelerates code execution with a system of instruction
prefetch and cache lines.
[..] The FLASH main features are:
(+) Flash memory read operations
(+) Flash memory program/erase operations
(+) Read / write protections
(+) Option bytes programming
(+) Prefetch on I-Code
(+) 32 cache lines of 4*64 bits on I-Code
(+) Error code correction (ECC) : Data in flash are 72-bits word
(8 bits added per double word)
##### How to use this driver #####
==============================================================================
[..]
This driver provides functions and macros to configure and program the FLASH
memory of all STM32G0xx devices.
(#) Flash Memory IO Programming functions:
(++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
HAL_FLASH_Lock() functions
(++) Program functions: double word and fast program (full row programming)
(++) There are two modes of programming:
(+++) Polling mode using HAL_FLASH_Program() function
(+++) Interrupt mode using HAL_FLASH_Program_IT() function
(#) Interrupts and flags management functions:
(++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
(++) Callback functions are called when the flash operations are finished :
HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise
HAL_FLASH_OperationErrorCallback()
(++) Get error flag status by calling HAL_GetError()
(#) Option bytes management functions :
(++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and
HAL_FLASH_OB_Lock() functions
(++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function.
In this case, a reset is generated
[..]
In addition to these functions, this driver includes a set of macros allowing
to handle the following operations:
(+) Set the latency
(+) Enable/Disable the prefetch buffer
(+) Enable/Disable the Instruction cache
(+) Reset the Instruction cache
(+) Enable/Disable the Flash power-down during low-power run and sleep modes
(+) Enable/Disable the Flash interrupts
(+) Monitor the Flash flags status
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup FLASH FLASH
* @brief FLASH HAL module driver
* @{
*/
#ifdef HAL_FLASH_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private defines -----------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Variables FLASH Private Variables
* @{
*/
/**
* @brief Variable used for Program/Erase sectors under interruption
*/
FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \
.ErrorCode = HAL_FLASH_ERROR_NONE, \
.ProcedureOnGoing = FLASH_TYPENONE, \
.Address = 0U, \
.Banks = 0U, \
.Page = 0U, \
.NbPagesToErase = 0U
};
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup FLASH_Private_Functions FLASH Private Functions
* @{
*/
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
* @{
*/
/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
* @brief Programming operation functions
*
@verbatim
===============================================================================
##### Programming operation functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to manage the FLASH
program operations.
@endverbatim
* @{
*/
/**
* @brief Program double word or fast program of a row at a specified address.
* @param TypeProgram Indicate the way to program at a specified address.
* This parameter can be a value of @ref FLASH_Type_Program
* @param Address Specifies the address to be programmed.
* @param Data Specifies the data to be programmed
* This parameter is the data for the double word program and the address where
* are stored the data for the row fast program.
*
* @retval HAL_StatusTypeDef HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
{
HAL_StatusTypeDef status;
/* Check the parameters */
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Reset error code */
pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
if (status == HAL_OK)
{
if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD)
{
/* Check the parameters */
assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
/* Program double-word (64-bit) at a specified address */
FLASH_Program_DoubleWord(Address, Data);
}
else
{
/* Check the parameters */
assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address));
/* Fast program a 32 row double-word (64-bit) at a specified address */
FLASH_Program_Fast(Address, (uint32_t)Data);
}
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
/* If the program operation is completed, disable the PG or FSTPG Bit */
CLEAR_BIT(FLASH->CR, TypeProgram);
}
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
/* return status */
return status;
}
/**
* @brief Program double word or fast program of a row at a specified address with interrupt enabled.
* @param TypeProgram Indicate the way to program at a specified address.
* This parameter can be a value of @ref FLASH_Type_Program
* @param Address Specifies the address to be programmed.
* @param Data Specifies the data to be programmed
* This parameter is the data for the double word program and the address where
* are stored the data for the row fast program.
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
{
HAL_StatusTypeDef status;
/* Check the parameters */
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Reset error code */
pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
if (status != HAL_OK)
{
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
}
else
{
/* Set internal variables used by the IRQ handler */
pFlash.ProcedureOnGoing = TypeProgram;
pFlash.Address = Address;
/* Enable End of Operation and Error interrupts */
FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE;
if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD)
{
/* Check the parameters */
assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
/* Program double-word (64-bit) at a specified address */
FLASH_Program_DoubleWord(Address, Data);
}
else
{
/* Check the parameters */
assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address));
/* Fast program a 32 row double-word (64-bit) at a specified address */
FLASH_Program_Fast(Address, (uint32_t)Data);
}
}
/* return status */
return status;
}
/**
* @brief Handle FLASH interrupt request.
* @retval None
*/
void HAL_FLASH_IRQHandler(void)
{
uint32_t param;
uint32_t error;
/* Save flash errors. */
error = (FLASH->SR & FLASH_SR_ERRORS);
/* A] Set parameter for user or error callbacks */
/* check operation was a program or erase */
if ((pFlash.ProcedureOnGoing & FLASH_TYPEERASE_MASS) != 0x00U)
{
/* return bank number */
param = pFlash.Banks;
}
else
{
/* Clear operation only for page erase or program */
CLEAR_BIT(FLASH->CR, pFlash.ProcedureOnGoing);
if ((pFlash.ProcedureOnGoing & (FLASH_TYPEPROGRAM_DOUBLEWORD | FLASH_TYPEPROGRAM_FAST)) != 0x00U)
{
/* return address being programmed */
param = pFlash.Address;
}
else
{
/* return page number being erased */
param = pFlash.Page;
}
}
/* B] Check errors */
if (error != 0x00U)
{
/*Save the error code*/
pFlash.ErrorCode |= error;
/* clear error flags */
FLASH->SR = FLASH_SR_ERRORS;
/*Stop the procedure ongoing*/
pFlash.ProcedureOnGoing = FLASH_TYPENONE;
/* Error callback */
HAL_FLASH_OperationErrorCallback(param);
}
/* C] Check FLASH End of Operation flag */
if ((FLASH->SR & FLASH_SR_EOP) != 0x00U)
{
/* Clear FLASH End of Operation pending bit */
FLASH->SR = FLASH_SR_EOP;
if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_PAGES)
{
/* Nb of pages to erased can be decreased */
pFlash.NbPagesToErase--;
/* Check if there are still pages to erase*/
if (pFlash.NbPagesToErase != 0x00U)
{
/* Increment page number */
pFlash.Page++;
FLASH_PageErase(pFlash.Banks, pFlash.Page);
}
else
{
/* No more pages to erase: stop erase pages procedure */
pFlash.ProcedureOnGoing = FLASH_TYPENONE;
}
}
else
{
/*Stop the ongoing procedure */
pFlash.ProcedureOnGoing = FLASH_TYPENONE;
}
/* User callback */
HAL_FLASH_EndOfOperationCallback(param);
}
if (pFlash.ProcedureOnGoing == FLASH_TYPENONE)
{
/* Disable End of Operation and Error interrupts */
FLASH->CR &= ~(FLASH_CR_EOPIE | FLASH_CR_ERRIE);
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
}
}
/**
* @brief FLASH end of operation interrupt callback.
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
* Mass Erase: 0
* Page Erase: Page which has been erased
* Program: Address which was selected for data program
* @retval None
*/
__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(ReturnValue);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
*/
}
/**
* @brief FLASH operation error interrupt callback.
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
* Mass Erase: 0
* Page Erase: Page number which returned an error
* Program: Address which was selected for data program
* @retval None
*/
__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(ReturnValue);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_FLASH_OperationErrorCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
* @brief Management functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to control the FLASH
memory operations.
@endverbatim
* @{
*/
/**
* @brief Unlock the FLASH control register access.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Unlock(void)
{
HAL_StatusTypeDef status = HAL_OK;
if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U)
{
/* Authorize the FLASH Registers access */
WRITE_REG(FLASH->KEYR, FLASH_KEY1);
WRITE_REG(FLASH->KEYR, FLASH_KEY2);
/* verify Flash is unlock */
if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U)
{
status = HAL_ERROR;
}
}
return status;
}
/**
* @brief Lock the FLASH control register access.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Lock(void)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Set the LOCK Bit to lock the FLASH Registers access */
SET_BIT(FLASH->CR, FLASH_CR_LOCK);
/* verify Flash is locked */
if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00u)
{
status = HAL_OK;
}
return status;
}
/**
* @brief Unlock the FLASH Option Bytes Registers access.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
{
HAL_StatusTypeDef status = HAL_ERROR;
if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00U)
{
/* Authorizes the Option Byte register programming */
WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
/* verify option bytes are unlocked */
if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) == 0x00U)
{
status = HAL_OK;
}
}
return status;
}
/**
* @brief Lock the FLASH Option Bytes Registers access.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK);
/* verify option bytes are locked */
if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00u)
{
status = HAL_OK;
}
return status;
}
/**
* @brief Launch the option byte loading.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
{
/* Set the bit to force the option byte reloading */
SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
/* We should not reach here : Option byte launch generates Option byte reset
so return error */
return HAL_ERROR;
}
/**
* @}
*/
/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
* @brief Peripheral Errors functions
*
@verbatim
===============================================================================
##### Peripheral Errors functions #####
===============================================================================
[..]
This subsection permits to get in run-time Errors of the FLASH peripheral.
@endverbatim
* @{
*/
/**
* @brief Get the specific FLASH error flag.
* @retval FLASH_ErrorCode The returned value can be
* @arg @ref HAL_FLASH_ERROR_NONE No error set
* @arg @ref HAL_FLASH_ERROR_OP Operation error
* @arg @ref HAL_FLASH_ERROR_PROG Programming error
* @arg @ref HAL_FLASH_ERROR_WRP Write protection error
* @arg @ref HAL_FLASH_ERROR_PGA Programming alignment error
* @arg @ref HAL_FLASH_ERROR_SIZ Size error
* @arg @ref HAL_FLASH_ERROR_PGS Programming sequence error
* @arg @ref HAL_FLASH_ERROR_MIS Fast programming data miss error
* @arg @ref HAL_FLASH_ERROR_FAST Fast programming error
* @arg @ref HAL_FLASH_ERROR_RD Read Protection error (PCROP)(*)
* @arg @ref HAL_FLASH_ERROR_OPTV Option validity error
* @arg @ref HAL_FLASH_ERROR_ECCD two ECC errors have been detected
* @note (*) availability depends on devices
*/
uint32_t HAL_FLASH_GetError(void)
{
return pFlash.ErrorCode;
}
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @addtogroup FLASH_Private_Functions
* @{
*/
/**
* @brief Wait for a FLASH operation to complete.
* @param Timeout maximum flash operation timeout
* @retval HAL_StatusTypeDef HAL Status
*/
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
{
uint32_t error;
/* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
Even if the FLASH operation fails, the BUSY flag will be reset and an error
flag will be set */
uint32_t timeout = HAL_GetTick() + Timeout;
/* Wait if any operation is ongoing */
#if defined(FLASH_DBANK_SUPPORT)
error = (FLASH_SR_BSY1 | FLASH_SR_BSY2);
#else
error = FLASH_SR_BSY1;
#endif
while ((FLASH->SR & error) != 0x00U)
{
if (HAL_GetTick() >= timeout)
{
return HAL_TIMEOUT;
}
}
/* check flash errors */
error = (FLASH->SR & FLASH_SR_ERRORS);
/* Clear SR register */
FLASH->SR = FLASH_SR_CLEAR;
if (error != 0x00U)
{
/*Save the error code*/
pFlash.ErrorCode = error;
return HAL_ERROR;
}
/* Wait for control register to be written */
timeout = HAL_GetTick() + Timeout;
while ((FLASH->SR & FLASH_SR_CFGBSY) != 0x00U)
{
if (HAL_GetTick() >= timeout)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Program double-word (64-bit) at a specified address.
* @param Address Specifies the address to be programmed.
* @param Data Specifies the data to be programmed.
* @retval None
*/
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
{
/* Set PG bit */
SET_BIT(FLASH->CR, FLASH_CR_PG);
/* Program first word */
*(uint32_t *)Address = (uint32_t)Data;
/* Barrier to ensure programming is performed in 2 steps, in right order
(independently of compiler optimization behavior) */
__ISB();
/* Program second word */
*(uint32_t *)(Address + 4U) = (uint32_t)(Data >> 32U);
}
/**
* @brief Fast program a 32 row double-word (64-bit) at a specified address.
* @param Address Specifies the address to be programmed.
* @param DataAddress Specifies the address where the data are stored.
* @retval None
*/
static __RAM_FUNC void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress)
{
uint8_t index = 0;
uint32_t dest = Address;
uint32_t src = DataAddress;
uint32_t primask_bit;
/* Set FSTPG bit */
SET_BIT(FLASH->CR, FLASH_CR_FSTPG);
/* Enter critical section: row programming should not be longer than 7 ms */
primask_bit = __get_PRIMASK();
__disable_irq();
/* Fast Program : 64 words */
while (index < 64U)
{
*(uint32_t *)dest = *(uint32_t *)src;
src += 4U;
dest += 4U;
index++;
}
/* wait for BSY1 in order to be sure that flash operation is ended befoire
allowing prefetch in flash. Timeout does not return status, as it will
be anyway done later */
#if defined(FLASH_DBANK_SUPPORT)
while ((FLASH->SR & (FLASH_SR_BSY1 | FLASH_SR_BSY2)) != 0x00U)
#else
while ((FLASH->SR & FLASH_SR_BSY1) != 0x00U)
#endif
{
}
/* Exit critical section: restore previous priority mask */
__set_PRIMASK(primask_bit);
}
/**
* @}
*/
#endif /* HAL_FLASH_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1304
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c
View File

File diff suppressed because it is too large Load Diff

554
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c
View File

@ -1,554 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_gpio.c
* @author MCD Application Team
* @brief GPIO HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (GPIO) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
*
@verbatim
==============================================================================
##### GPIO Peripheral features #####
==============================================================================
[..]
(+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
configured by software in several modes:
(++) Input mode
(++) Analog mode
(++) Output mode
(++) Alternate function mode
(++) External interrupt/event lines
(+) During and just after reset, the alternate functions and external interrupt
lines are not active and the I/O ports are configured in input floating mode.
(+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
activated or not.
(+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
type and the IO speed can be selected depending on the VDD value.
(+) The microcontroller IO pins are connected to onboard peripherals/modules through a
multiplexer that allows only one peripheral alternate function (AF) connected
to an IO pin at a time. In this way, there can be no conflict between peripherals
sharing the same IO pin.
(+) All ports have external interrupt/event capability. To use external interrupt
lines, the port must be configured in input mode. All available GPIO pins are
connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
(+) The external interrupt/event controller consists of up to 28 edge detectors
(16 lines are connected to GPIO) for generating event/interrupt requests (each
input line can be independently configured to select the type (interrupt or event)
and the corresponding trigger event (rising or falling or both). Each line can
also be masked independently.
##### How to use this driver #####
==============================================================================
[..]
(#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
(#) Configure the GPIO pin(s) using HAL_GPIO_Init().
(++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
(++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
structure.
(++) In case of Output or alternate function mode selection: the speed is
configured through "Speed" member from GPIO_InitTypeDef structure.
(++) In alternate mode is selection, the alternate function connected to the IO
is configured through "Alternate" member from GPIO_InitTypeDef structure.
(++) Analog mode is required when a pin is to be used as ADC channel
or DAC output.
(++) In case of external interrupt/event selection the "Mode" member from
GPIO_InitTypeDef structure select the type (interrupt or event) and
the corresponding trigger event (rising or falling or both).
(#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
HAL_NVIC_EnableIRQ().
(#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
(#) To set/reset the level of a pin configured in output mode use
HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
(#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
(#) During and just after reset, the alternate functions are not
active and the GPIO pins are configured in input floating mode (except JTAG
pins).
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
(PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
priority over the GPIO function.
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
general purpose PF0 and PF1, respectively, when the HSE oscillator is off.
The HSE has priority over the GPIO function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/** MISRA C:2012 deviation rule has been granted for following rules:
* Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of
* range of the shift operator in following API :
* HAL_GPIO_Init
* HAL_GPIO_DeInit
*/
#ifdef HAL_GPIO_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private defines ------------------------------------------------------------*/
/** @defgroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
#define GPIO_MODE (0x00000003u)
#define EXTI_MODE (0x10000000u)
#define GPIO_MODE_IT (0x00010000u)
#define GPIO_MODE_EVT (0x00020000u)
#define RISING_EDGE (0x00100000u)
#define FALLING_EDGE (0x00200000u)
#define GPIO_OUTPUT_TYPE (0x00000010u)
#define GPIO_NUMBER (16u)
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIO_Exported_Functions
* @{
*/
/** @addtogroup GPIO_Exported_Functions_Group1
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init.
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family
* @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
* the configuration information for the specified GPIO peripheral.
* @retval None
*/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
{
uint32_t position = 0x00u;
uint32_t iocurrent;
uint32_t temp;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
/* Configure the port pins */
while (((GPIO_Init->Pin) >> position) != 0x00u)
{
/* Get current io position */
iocurrent = (GPIO_Init->Pin) & (1uL << position);
if (iocurrent != 0x00u)
{
/*--------------------- GPIO Mode Configuration ------------------------*/
/* In case of Output or Alternate function mode selection */
if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
(GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Speed parameter */
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
/* Configure the IO Speed */
temp = GPIOx->OSPEEDR;
temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u));
temp |= (GPIO_Init->Speed << (position * 2u));
GPIOx->OSPEEDR = temp;
/* Configure the IO Output Type */
temp = GPIOx->OTYPER;
temp &= ~(GPIO_OTYPER_OT0 << position) ;
temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position);
GPIOx->OTYPER = temp;
}
/* Activate the Pull-up or Pull down resistor for the current IO */
temp = GPIOx->PUPDR;
temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
temp |= ((GPIO_Init->Pull) << (position * 2u));
GPIOx->PUPDR = temp;
/* In case of Alternate function mode selection */
if ((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Alternate function parameters */
assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
/* Configure Alternate function mapped with the current IO */
temp = GPIOx->AFR[position >> 3u];
temp &= ~(0xFu << ((position & 0x07u) * 4u));
temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u));
GPIOx->AFR[position >> 3u] = temp;
}
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
temp = GPIOx->MODER;
temp &= ~(GPIO_MODER_MODE0 << (position * 2u));
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u));
GPIOx->MODER = temp;
/*--------------------- EXTI Mode Configuration ------------------------*/
/* Configure the External Interrupt or event for the current IO */
if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
{
temp = EXTI->EXTICR[position >> 2u];
temp &= ~(0x0FuL << (8u * (position & 0x03u)));
temp |= (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u)));
EXTI->EXTICR[position >> 2u] = temp;
/* Clear EXTI line configuration */
temp = EXTI->IMR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
{
temp |= iocurrent;
}
EXTI->IMR1 = temp;
temp = EXTI->EMR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
{
temp |= iocurrent;
}
EXTI->EMR1 = temp;
/* Clear Rising Falling edge configuration */
temp = EXTI->RTSR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
{
temp |= iocurrent;
}
EXTI->RTSR1 = temp;
temp = EXTI->FTSR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
{
temp |= iocurrent;
}
EXTI->FTSR1 = temp;
}
}
position++;
}
}
/**
* @brief De-initialize the GPIOx peripheral registers to their default reset values.
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family
* @param GPIO_Pin specifies the port bit to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
{
uint32_t position = 0x00u;
uint32_t iocurrent;
uint32_t tmp;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
/* Configure the port pins */
while ((GPIO_Pin >> position) != 0x00u)
{
/* Get current io position */
iocurrent = (GPIO_Pin) & (1uL << position);
if (iocurrent != 0x00u)
{
/*------------------------- EXTI Mode Configuration --------------------*/
/* Clear the External Interrupt or Event for the current IO */
tmp = EXTI->EXTICR[position >> 2u];
tmp &= (0x0FuL << (8u * (position & 0x03u)));
if (tmp == (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u))))
{
/* Clear EXTI line configuration */
EXTI->IMR1 &= ~(iocurrent);
EXTI->EMR1 &= ~(iocurrent);
/* Clear Rising Falling edge configuration */
EXTI->RTSR1 &= ~(iocurrent);
EXTI->FTSR1 &= ~(iocurrent);
tmp = 0x0FuL << (8u * (position & 0x03u));
EXTI->EXTICR[position >> 2u] &= ~tmp;
}
/*------------------------- GPIO Mode Configuration --------------------*/
/* Configure IO in Analog Mode */
GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u));
/* Configure the default Alternate Function in current IO */
GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ;
/* Configure the default value for IO Speed */
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u));
/* Configure the default value IO Output Type */
GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ;
/* Deactivate the Pull-up and Pull-down resistor for the current IO */
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
}
position++;
}
}
/**
* @}
*/
/** @addtogroup GPIO_Exported_Functions_Group2
* @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Read the specified input port pin.
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family
* @param GPIO_Pin specifies the port bit to read.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval The input port pin value.
*/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
{
GPIO_PinState bitstatus;
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
if ((GPIOx->IDR & GPIO_Pin) != 0x00u)
{
bitstatus = GPIO_PIN_SET;
}
else
{
bitstatus = GPIO_PIN_RESET;
}
return bitstatus;
}
/**
* @brief Set or clear the selected data port bit.
*
* @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify
* accesses. In this way, there is no risk of an IRQ occurring between
* the read and the modify access.
*
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family
* @param GPIO_Pin specifies the port bit to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @param PinState specifies the value to be written to the selected bit.
* This parameter can be one of the GPIO_PinState enum values:
* @arg GPIO_PIN_RESET: to clear the port pin
* @arg GPIO_PIN_SET: to set the port pin
* @retval None
*/
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
{
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_PIN_ACTION(PinState));
if (PinState != GPIO_PIN_RESET)
{
GPIOx->BSRR = (uint32_t)GPIO_Pin;
}
else
{
GPIOx->BRR = (uint32_t)GPIO_Pin;
}
}
/**
* @brief Toggle the specified GPIO pin.
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family
* @param GPIO_Pin specifies the pin to be toggled.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
{
uint32_t odr;
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
/* get current Output Data Register value */
odr = GPIOx->ODR;
/* Set selected pins that were at low level, and reset ones that were high */
GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
}
/**
* @brief Lock GPIO Pins configuration registers.
* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
* @note The configuration of the locked GPIO pins can no longer be modified
* until the next reset.
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family
* @param GPIO_Pin specifies the port bits to be locked.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
{
__IO uint32_t tmp = GPIO_LCKR_LCKK;
/* Check the parameters */
assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
/* Apply lock key write sequence */
tmp |= GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
GPIOx->LCKR = GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Read LCKK register. This read is mandatory to complete key lock sequence */
tmp = GPIOx->LCKR;
/* read again in order to confirm lock is active */
if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u)
{
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Handle EXTI interrupt request.
* @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
* @retval None
*/
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
{
/* EXTI line interrupt detected */
if (__HAL_GPIO_EXTI_GET_RISING_IT(GPIO_Pin) != 0x00u)
{
__HAL_GPIO_EXTI_CLEAR_RISING_IT(GPIO_Pin);
HAL_GPIO_EXTI_Rising_Callback(GPIO_Pin);
}
if (__HAL_GPIO_EXTI_GET_FALLING_IT(GPIO_Pin) != 0x00u)
{
__HAL_GPIO_EXTI_CLEAR_FALLING_IT(GPIO_Pin);
HAL_GPIO_EXTI_Falling_Callback(GPIO_Pin);
}
}
/**
* @brief EXTI line detection callback.
* @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
* @retval None
*/
__weak void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(GPIO_Pin);
/* NOTE: This function should not be modified, when the callback is needed,
the HAL_GPIO_EXTI_Rising_Callback could be implemented in the user file
*/
}
/**
* @brief EXTI line detection callback.
* @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
* @retval None
*/
__weak void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(GPIO_Pin);
/* NOTE: This function should not be modified, when the callback is needed,
the HAL_GPIO_EXTI_Falling_Callback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_GPIO_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

278
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c
View File

@ -1,278 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_iwdg.c
* @author MCD Application Team
* @brief IWDG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Independent Watchdog (IWDG) peripheral:
* + Initialization and Start functions
* + IO operation functions
*
@verbatim
==============================================================================
##### IWDG Generic features #####
==============================================================================
[..]
(+) The IWDG can be started by either software or hardware (configurable
through option byte).
(+) The IWDG is clocked by the Low-Speed Internal clock (LSI) and thus stays
active even if the main clock fails.
(+) Once the IWDG is started, the LSI is forced ON and both cannot be
disabled. The counter starts counting down from the reset value (0xFFF).
When it reaches the end of count value (0x000) a reset signal is
generated (IWDG reset).
(+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register,
the IWDG_RLR value is reloaded into the counter and the watchdog reset
is prevented.
(+) The IWDG is implemented in the VDD voltage domain that is still functional
in STOP and STANDBY mode (IWDG reset can wake up the CPU from STANDBY).
IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
reset occurs.
(+) Debug mode: When the microcontroller enters debug mode (core halted),
the IWDG counter either continues to work normally or stops, depending
on DBG_IWDG_STOP configuration bit in DBG module, accessible through
__HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros.
[..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
The IWDG timeout may vary due to LSI clock frequency dispersion.
STM32G0xx devices provide the capability to measure the LSI clock
frequency (LSI clock is internally connected to TIM16 CH1 input capture).
The measured value can be used to have an IWDG timeout with an
acceptable accuracy.
[..] Default timeout value (necessary for IWDG_SR status register update):
Constant LSI_VALUE is defined based on the nominal LSI clock frequency.
This frequency being subject to variations as mentioned above, the
default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT
below) may become too short or too long.
In such cases, this default timeout value can be tuned by redefining
the constant LSI_VALUE at user-application level (based, for instance,
on the measured LSI clock frequency as explained above).
##### How to use this driver #####
==============================================================================
[..]
(#) Use IWDG using HAL_IWDG_Init() function to :
(++) Enable instance by writing Start keyword in IWDG_KEY register. LSI
clock is forced ON and IWDG counter starts counting down.
(++) Enable write access to configuration registers:
IWDG_PR, IWDG_RLR and IWDG_WINR.
(++) Configure the IWDG prescaler and counter reload value. This reload
value will be loaded in the IWDG counter each time the watchdog is
reloaded, then the IWDG will start counting down from this value.
(++) Wait for status flags to be reset.
(++) Depending on window parameter:
(+++) If Window Init parameter is same as Window register value,
nothing more is done but reload counter value in order to exit
function with exact time base.
(+++) Else modify Window register. This will automatically reload
watchdog counter.
(#) Then the application program must refresh the IWDG counter at regular
intervals during normal operation to prevent an MCU reset, using
HAL_IWDG_Refresh() function.
*** IWDG HAL driver macros list ***
====================================
[..]
Below the list of most used macros in IWDG HAL driver:
(+) __HAL_IWDG_START: Enable the IWDG peripheral
(+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in
the reload register
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
#ifdef HAL_IWDG_MODULE_ENABLED
/** @addtogroup IWDG
* @brief IWDG HAL module driver.
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup IWDG_Private_Defines IWDG Private Defines
* @{
*/
/* Status register needs up to 5 LSI clock periods divided by the clock
prescaler to be updated. The number of LSI clock periods is upper-rounded to
6 for the timeout value calculation.
The timeout value is also calculated using the highest prescaler (256) and
the LSI_VALUE constant. The value of this constant can be changed by the user
to take into account possible LSI clock period variations.
The timeout value is multiplied by 1000 to be converted in milliseconds. */
#define HAL_IWDG_DEFAULT_TIMEOUT ((6UL * 256UL * 1000UL) / LSI_VALUE)
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup IWDG_Exported_Functions
* @{
*/
/** @addtogroup IWDG_Exported_Functions_Group1
* @brief Initialization and Start functions.
*
@verbatim
===============================================================================
##### Initialization and Start functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize the IWDG according to the specified parameters in the
IWDG_InitTypeDef of associated handle.
(+) Manage Window option.
(+) Once initialization is performed in HAL_IWDG_Init function, Watchdog
is reloaded in order to exit function with correct time base.
@endverbatim
* @{
*/
/**
* @brief Initialize the IWDG according to the specified parameters in the
* IWDG_InitTypeDef and start watchdog. Before exiting function,
* watchdog is refreshed in order to have correct time base.
* @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
* the configuration information for the specified IWDG module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
{
uint32_t tickstart;
/* Check the IWDG handle allocation */
if (hiwdg == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window));
/* Enable IWDG. LSI is turned on automatically */
__HAL_IWDG_START(hiwdg);
/* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing
0x5555 in KR */
IWDG_ENABLE_WRITE_ACCESS(hiwdg);
/* Write to IWDG registers the Prescaler & Reload values to work with */
hiwdg->Instance->PR = hiwdg->Init.Prescaler;
hiwdg->Instance->RLR = hiwdg->Init.Reload;
/* Check pending flag, if previous update not done, return timeout */
tickstart = HAL_GetTick();
/* Wait for register to be updated */
while (hiwdg->Instance->SR != 0x00u)
{
if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
{
return HAL_TIMEOUT;
}
}
/* If window parameter is different than current value, modify window
register */
if (hiwdg->Instance->WINR != hiwdg->Init.Window)
{
/* Write to IWDG WINR the IWDG_Window value to compare with. In any case,
even if window feature is disabled, Watchdog will be reloaded by writing
windows register */
hiwdg->Instance->WINR = hiwdg->Init.Window;
}
else
{
/* Reload IWDG counter with value defined in the reload register */
__HAL_IWDG_RELOAD_COUNTER(hiwdg);
}
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup IWDG_Exported_Functions_Group2
* @brief IO operation functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Refresh the IWDG.
@endverbatim
* @{
*/
/**
* @brief Refresh the IWDG.
* @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
* the configuration information for the specified IWDG module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
{
/* Reload IWDG counter with value defined in the reload register */
__HAL_IWDG_RELOAD_COUNTER(hiwdg);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_IWDG_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

545
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c
View File

@ -1,545 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_pwr.c
* @author MCD Application Team
* @brief PWR HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Power Controller (PWR) peripheral:
* + Initialization/de-initialization functions
* + Peripheral Control functions
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
#ifdef HAL_PWR_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup PWR_Private_Defines PWR Private Defines
* @{
*/
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and de-initialization functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..]
@endverbatim
* @{
*/
/**
* @brief Deinitialize the HAL PWR peripheral registers to their default reset
values.
* @retval None
*/
void HAL_PWR_DeInit(void)
{
__HAL_RCC_PWR_FORCE_RESET();
__HAL_RCC_PWR_RELEASE_RESET();
}
/**
* @}
*/
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
* @brief Low Power modes configuration functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
*** WakeUp pin configuration ***
================================
[..]
(+) WakeUp pins are used to wakeup the system from Standby mode or
Shutdown mode. WakeUp pins polarity can be set to configure event
detection on high level (rising edge) or low level (falling edge).
*** Low Power mode configuration ***
=====================================
[..]
The devices feature 7 low-power modes:
(+) Low-power run mode: core and peripherals are running at low frequency.
Regulator is in low power mode.
(+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running,
regulator is main mode.
(+) Low-power Sleep mode: Cortex-M0+ core stopped, peripherals kept running
and regulator in low power mode.
(+) Stop 0 mode: all clocks are stopped except LSI and LSE, regulator is
main mode.
(+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator
off, low power regulator on.
(+) Standby mode: all clocks are stopped except LSI and LSE, regulator is
disable.
(+) Shutdown mode: all clocks are stopped except LSE, regulator is
disable.
*** Low-power run mode ***
==========================
[..]
(+) Entry: (from main run mode)
(++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after
having decreased the system clock below 2 MHz.
(+) Exit:
(++) clear LPR bit then wait for REGLPF bit to be reset with
HAL_PWREx_DisableLowPowerRunMode() API. Only then can the
system clock frequency be increased above 2 MHz.
*** Sleep mode / Low-power sleep mode ***
=========================================
[..]
(+) Entry:
The Sleep & Low-power Sleep modes are entered through
HAL_PWR_EnterSLEEPMode() API specifying whether or not the regulator
is forced to low-power mode and if exit is interrupt or event
triggered.
(++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode).
(++) PWR_LOWPOWERREGULATOR_ON: Low-power Sleep mode (regulator in low
power mode). In this case, the system clock frequency must have
been decreased below 2 MHz beforehand.
(++) PWR_SLEEPENTRY_WFI: Core enters sleep mode with WFI instruction
(++) PWR_SLEEPENTRY_WFE: Core enters sleep mode with WFE instruction
(+) WFI Exit:
(++) Any interrupt enabled in nested vectored interrupt controller (NVIC)
(+) WFE Exit:
(++) Any wakeup event if cortex is configured with SEVONPEND = 0
(++) Interrupt even when disabled in NVIC if cortex is configured with
SEVONPEND = 1
[..] When exiting the Low-power Sleep mode by issuing an interrupt or a wakeup event,
the MCU is in Low-power Run mode.
*** Stop 0 & Stop 1 modes ***
=============================
[..]
(+) Entry:
The Stop modes are entered through the following APIs:
(++) HAL_PWR_EnterSTOPMode() with following settings:
(+++) PWR_MAINREGULATOR_ON to enter STOP0 mode.
(+++) PWR_LOWPOWERREGULATOR_ON to enter STOP1 mode.
(+) Exit (interrupt or event-triggered, specified when entering STOP mode):
(++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction
(++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction
(+) WFI Exit:
(++) Any EXTI line (internal or external) configured in interrupt mode
with corresponding interrupt enable in NVIC
(+) WFE Exit:
(++) Any EXTI line (internal or external) configured in event mode if
cortex is configured with SEVONPEND = 0
(++) Any EXTI line configured in interrupt mode (even if the
corresponding EXTI Interrupt vector is disabled in the NVIC) if
cortex is configured with SEVONPEND = 0. The interrupt source can
be external interrupts or peripherals with wakeup capability.
[..] When exiting Stop, the MCU is either in Run mode or in Low-power Run mode
depending on the LPR bit setting.
*** Standby mode ***
====================
[..] In Standby mode, it is possible to keep backup SRAM content (defined as
full SRAM) keeping low power regulator on. This is achievable by setting
Ram retention bit calling HAL_PWREx_EnableSRAMRetention API. This increases
power consumption.
Its also possible to define I/O states using APIs:
HAL_PWREx_EnableGPIOPullUp, HAL_PWREx_EnableGPIOPullDown &
HAL_PWREx_EnablePullUpPullDownConfig
(+) Entry:
(++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API, by
setting SLEEPDEEP in Cortex control register.
(+) Exit:
(++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp),
tamper event (internal & external), LSE CSS detection, reset on
NRST pin, IWDG reset & BOR reset.
[..] Exiting Standby generates a power reset: Cortex is reset and execute
Reset handler vector, all registers in the Vcore domain are set to
their reset value. Registers outside the VCORE domain (RTC, WKUP, IWDG,
and Standby/Shutdown modes control) are not impacted.
*** Shutdown mode ***
======================
[..]
In Shutdown mode,
voltage regulator is disabled, all clocks are off except LSE, RRS bit is
cleared. SRAM and registers contents are lost except for backup domain
registers.
(+) Entry:
(++) The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API,
by setting SLEEPDEEP in Cortex control register.
(+) Exit:
(++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp),
tamper event (internal & external), LSE CSS detection, reset on
NRST pin.
[..] Exiting Shutdown generates a brown out reset: Cortex is reset and execute
Reset handler vector, all registers are set to their reset value but ones
in backup domain.
@endverbatim
* @{
*/
/**
* @brief Enable access to the backup domain
* (RTC & TAMP registers, backup registers, RCC BDCR register).
* @note After reset, the backup domain is protected against
* possible unwanted write accesses. All RTC & TAMP registers (backup
* registers included) and RCC BDCR register are concerned.
* @retval None
*/
void HAL_PWR_EnableBkUpAccess(void)
{
SET_BIT(PWR->CR1, PWR_CR1_DBP);
}
/**
* @brief Disable access to the backup domain
* @retval None
*/
void HAL_PWR_DisableBkUpAccess(void)
{
CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
}
/**
* @brief Enable the WakeUp PINx functionality.
* @param WakeUpPinPolarity Specifies which Wake-Up pin to enable.
* This parameter can be one of the following legacy values which set
* the default polarity i.e. detection on high level (rising edge):
* @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*),
* PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6
* or one of the following value where the user can explicitly specify
* the enabled pin and the chosen polarity:
* @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
* @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
* @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW (*)
* @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
* @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW (*)
* @arg @ref PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
* @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
* @note (*) availability depends on devices
* @retval None
*/
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
{
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
/* Specifies the Wake-Up pin polarity for the event detection
(rising or falling edge) */
MODIFY_REG(PWR->CR4, (PWR_CR4_WP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT));
/* Enable wake-up pin */
SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity));
}
/**
* @brief Disable the WakeUp PINx functionality.
* @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
* This parameter can be one of the following values:
* @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2,PWR_WAKEUP_PIN3(*),
* PWR_WAKEUP_PIN4,PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6
* @note (*) availability depends on devices
* @retval None
*/
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx));
}
/**
* @brief Enter Sleep or Low-power Sleep mode.
* @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as
* in Run mode.
* @param Regulator Specifies the regulator state in Sleep/Low-power Sleep
* mode. This parameter can be one of the following values:
* @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode)
* @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator
* in low-power mode)
* @note Low-power Sleep mode is entered from Low-power Run mode only. In
* case Regulator parameter is set to Low Power but MCU is in Run mode,
* we will first enter in Low-power Run mode. Therefore, user should
* take care that HCLK frequency is less than 2 MHz.
* @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode.
* To switch back to Run mode, user must call
* HAL_PWREx_DisableLowPowerRunMode() API.
* @param SLEEPEntry Specifies if Sleep mode is entered with WFI or WFE
* instruction. This parameter can be one of the following values:
* @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep
* mode with WFI instruction
* @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep
* mode with WFE instruction
* @note When WFI entry is used, tick interrupt have to be disabled if not
* desired as the interrupt wake up source.
* @retval None
*/
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
{
/* Check the parameters */
assert_param(IS_PWR_REGULATOR(Regulator));
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
/* Set Regulator parameter */
if(Regulator != PWR_MAINREGULATOR_ON)
{
/* If in run mode, first move to low-power run mode.
The system clock frequency must be below 2 MHz at this point. */
if((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u)
{
HAL_PWREx_EnableLowPowerRunMode();
}
}
else
{
/* If in low-power run mode at this point, exit it */
if((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u)
{
if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK)
{
return ;
}
}
}
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* Select SLEEP mode entry -------------------------------------------------*/
if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__SEV();
__WFE();
__WFE();
}
}
/**
* @brief Enter Stop mode
* @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with
* legacy code running on devices where only "Stop mode" is mentioned
* with main or low power regulator ON.
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
* @note All clocks in the VCORE domain are stopped; the PLL, the HSI and the
* HSE oscillators are disabled. Some peripherals with the wakeup
* capability can switch on the HSI to receive a frame, and switch off
* the HSI after receiving the frame if it is not a wakeup frame.
* SRAM and register contents are preserved.
* The BOR is available.
* The voltage regulator can be configured either in normal (Stop 0) or
* low-power mode (Stop 1).
* @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a
* wakeup event, the HSI RC oscillator is selected as system clock
* @note When the voltage regulator operates in low power mode (Stop 1),
* an additional startup delay is incurred when waking up. By keeping
* the internal regulator ON during Stop mode (Stop 0), the consumption
* is higher although the startup time is reduced.
* @param Regulator Specifies the regulator state in Stop mode
* This parameter can be one of the following values:
* @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON)
* @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power
* regulator ON)
* @param STOPEntry Specifies Stop 0 or Stop 1 mode is entered with WFI or
* WFE instruction. This parameter can be one of the following values:
* @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI
* instruction.
* @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE
* instruction.
* @retval None
*/
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
{
/* Check the parameters */
assert_param(IS_PWR_REGULATOR(Regulator));
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
if (Regulator != PWR_MAINREGULATOR_ON)
{
/* Stop mode with Low-Power Regulator */
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP1);
}
else
{
/* Stop mode with Main Regulator */
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP0);
}
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* Select Stop mode entry --------------------------------------------------*/
if(STOPEntry == PWR_STOPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__SEV();
__WFE();
__WFE();
}
/* Reset SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Enter Standby mode.
* @note In Standby mode, the PLL, the HSI and the HSE oscillators are
* switched off. The voltage regulator is disabled. SRAM and register
* contents are lost except for registers in the Backup domain and
* Standby circuitry. BOR is available.
* @note The I/Os can be configured either with a pull-up or pull-down or can
* be kept in analog state.
* HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown()
* respectively enable Pull Up and PullDown state.
* HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown()
* disable the same. These states are effective in Standby mode only if
* APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API.
* @note Sram content can be kept setting RRS through HAL_PWREx_EnableSRAMRetention()
* @retval None
*/
void HAL_PWR_EnterSTANDBYMode(void)
{
/* Set Stand-by mode */
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STANDBY);
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM)
__force_stores();
#endif
/* Request Wait For Interrupt */
__WFI();
}
/**
* @brief Enable Sleep-On-Exit Cortex feature
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the
* processor enters SLEEP or DEEPSLEEP mode when an interruption
* handling is over returning to thread mode. Setting this bit is
* useful when the processor is expected to run only on interruptions
* handling.
* @retval None
*/
void HAL_PWR_EnableSleepOnExit(void)
{
/* Set SLEEPONEXIT bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Disable Sleep-On-Exit Cortex feature
* @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the
* processor enters SLEEP or DEEPSLEEP mode when an interruption
* handling is over.
* @retval None
*/
void HAL_PWR_DisableSleepOnExit(void)
{
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Enable Cortex Sev On Pending feature.
* @note Set SEVONPEND bit of SCR register. When this bit is set, enabled
* events and all interrupts, including disabled ones can wakeup
* processor from WFE.
* @retval None
*/
void HAL_PWR_EnableSEVOnPend(void)
{
/* Set SEVONPEND bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @brief Disable Cortex Sev On Pending feature.
* @note Clear SEVONPEND bit of SCR register. When this bit is clear, only
* enable interrupts or events can wakeup processor from WFE
* @retval None
*/
void HAL_PWR_DisableSEVOnPend(void)
{
/* Clear SEVONPEND bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_PWR_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1019
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c
View File

File diff suppressed because it is too large Load Diff

1437
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c
View File

File diff suppressed because it is too large Load Diff

1682
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c
View File

File diff suppressed because it is too large Load Diff

7719
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c
View File

File diff suppressed because it is too large Load Diff

2800
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c
View File

File diff suppressed because it is too large Load Diff

4624
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c
View File

File diff suppressed because it is too large Load Diff

1059
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c
View File

File diff suppressed because it is too large Load Diff

369
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c
View File

@ -1,369 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_ll_dma.c
* @author MCD Application Team
* @brief DMA LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_ll_dma.h"
#include "stm32g0xx_ll_bus.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32G0xx_LL_Driver
* @{
*/
#if defined (DMA1) || defined (DMA2)
/** @defgroup DMA_LL DMA
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup DMA_LL_Private_Macros
* @{
*/
#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \
((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \
((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY))
#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \
((__VALUE__) == LL_DMA_MODE_CIRCULAR))
#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \
((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT))
#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \
((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT))
#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \
((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \
((__VALUE__) == LL_DMA_PDATAALIGN_WORD))
#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \
((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \
((__VALUE__) == LL_DMA_MDATAALIGN_WORD))
#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) ((__VALUE__) <= LL_DMAMUX_MAX_REQ)
#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \
((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \
((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \
((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH))
#if defined(DMA2)
#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5) || \
((CHANNEL) == LL_DMA_CHANNEL_6) || \
((CHANNEL) == LL_DMA_CHANNEL_7))) || \
(((INSTANCE) == DMA2) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5))))
#else /* DMA1 */
#if defined(DMA1_Channel7)
#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5) || \
((CHANNEL) == LL_DMA_CHANNEL_6) || \
((CHANNEL) == LL_DMA_CHANNEL_7))))
#else
#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5))))
#endif
#endif /* DMA2 */
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA_LL_Exported_Functions
* @{
*/
/** @addtogroup DMA_LL_EF_Init
* @{
*/
/**
* @brief De-initialize the DMA registers to their default reset values.
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7
* @arg @ref LL_DMA_CHANNEL_ALL
* @retval An ErrorStatus enumeration value:
* - SUCCESS: DMA registers are de-initialized
* - ERROR: DMA registers are not de-initialized
*/
ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel)
{
ErrorStatus status = SUCCESS;
/* Check the DMA Instance DMAx and Channel parameters*/
assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL));
if (Channel == LL_DMA_CHANNEL_ALL)
{
if (DMAx == DMA1)
{
/* Force reset of DMA clock */
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1);
/* Release reset of DMA clock */
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1);
}
#if defined(DMA2)
else if (DMAx == DMA2)
{
/* Force reset of DMA clock */
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2);
/* Release reset of DMA clock */
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2);
}
#endif
else
{
status = ERROR;
}
}
else
{
DMA_Channel_TypeDef *tmp;
tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel));
/* Disable the selected DMAx_Channely */
CLEAR_BIT(tmp->CCR, DMA_CCR_EN);
/* Reset DMAx_Channely control register */
WRITE_REG(tmp->CCR, 0U);
/* Reset DMAx_Channely remaining bytes register */
WRITE_REG(tmp->CNDTR, 0U);
/* Reset DMAx_Channely peripheral address register */
WRITE_REG(tmp->CPAR, 0U);
/* Reset DMAx_Channely memory address register */
WRITE_REG(tmp->CMAR, 0U);
/* Reset Request register field for DMAx Channel */
LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMAMUX_REQ_MEM2MEM);
if (Channel == LL_DMA_CHANNEL_1)
{
/* Reset interrupt pending bits for DMAx Channel1 */
LL_DMA_ClearFlag_GI1(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_2)
{
/* Reset interrupt pending bits for DMAx Channel2 */
LL_DMA_ClearFlag_GI2(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_3)
{
/* Reset interrupt pending bits for DMAx Channel3 */
LL_DMA_ClearFlag_GI3(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_4)
{
/* Reset interrupt pending bits for DMAx Channel4 */
LL_DMA_ClearFlag_GI4(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_5)
{
/* Reset interrupt pending bits for DMAx Channel5 */
LL_DMA_ClearFlag_GI5(DMAx);
}
#if defined(DMA1_Channel6)
else if (Channel == LL_DMA_CHANNEL_6)
{
/* Reset interrupt pending bits for DMAx Channel6 */
LL_DMA_ClearFlag_GI6(DMAx);
}
#endif
#if defined(DMA1_Channel7)
else if (Channel == LL_DMA_CHANNEL_7)
{
/* Reset interrupt pending bits for DMAx Channel7 */
LL_DMA_ClearFlag_GI7(DMAx);
}
#endif
else
{
status = ERROR;
}
}
return status;
}
/**
* @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct.
* @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros :
* @arg @ref __LL_DMA_GET_INSTANCE
* @arg @ref __LL_DMA_GET_CHANNEL
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7
* @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: DMA registers are initialized
* - ERROR: Not applicable
*/
ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct)
{
/* Check the DMA Instance DMAx and Channel parameters*/
assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
/* Check the DMA parameters from DMA_InitStruct */
assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction));
assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode));
assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode));
assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode));
assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize));
assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize));
assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData));
assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest));
assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority));
/*---------------------------- DMAx CCR Configuration ------------------------
* Configure DMAx_Channely: data transfer direction, data transfer mode,
* peripheral and memory increment mode,
* data size alignment and priority level with parameters :
* - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits
* - Mode: DMA_CCR_CIRC bit
* - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit
* - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit
* - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits
* - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits
* - Priority: DMA_CCR_PL[1:0] bits
*/
LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \
DMA_InitStruct->Mode | \
DMA_InitStruct->PeriphOrM2MSrcIncMode | \
DMA_InitStruct->MemoryOrM2MDstIncMode | \
DMA_InitStruct->PeriphOrM2MSrcDataSize | \
DMA_InitStruct->MemoryOrM2MDstDataSize | \
DMA_InitStruct->Priority);
/*-------------------------- DMAx CMAR Configuration -------------------------
* Configure the memory or destination base address with parameter :
* - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits
*/
LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress);
/*-------------------------- DMAx CPAR Configuration -------------------------
* Configure the peripheral or source base address with parameter :
* - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits
*/
LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress);
/*--------------------------- DMAx CNDTR Configuration -----------------------
* Configure the peripheral base address with parameter :
* - NbData: DMA_CNDTR_NDT[15:0] bits
*/
LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData);
/*--------------------------- DMAMUXx CCR Configuration ----------------------
* Configure the DMA request for DMA Channels on DMAMUX Channel x with parameter :
* - PeriphRequest: DMA_CxCR[7:0] bits
*/
LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest);
return SUCCESS;
}
/**
* @brief Set each @ref LL_DMA_InitTypeDef field to default value.
* @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure.
* @retval None
*/
void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct)
{
/* Set DMA_InitStruct fields to default values */
DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U;
DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U;
DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL;
DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT;
DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE;
DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE;
DMA_InitStruct->NbData = 0x00000000U;
DMA_InitStruct->PeriphRequest = LL_DMAMUX_REQ_MEM2MEM;
DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* DMA1 || DMA2 */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1349
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c
View File

File diff suppressed because it is too large Load Diff

19
Makefile
View File

@ -9,25 +9,13 @@ CC_SOURCES = \
Core/main.cc \
platform/stm32g0xx/Gpio.cc \
platform/stm32g0xx/Uart.cc \
platform/stm32g0xx/IndependentWatchdog.cc
platform/stm32g0xx/IndependentWatchdog.cc \
platform/stm32g0xx/low_level_interrupt.cc
C_SOURCES = \
platform/stm32g0xx/stm32g0xx_it.c \
platform/stm32g0xx/stm32g0xx_hal_msp.c \
platform/stm32g0xx/system_stm32g0xx.c \
platform/stm32g0xx/syscalls.c \
platform/stm32g0xx/sysmem.c \
Core/print.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c \
Legacy/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c
ASM_SOURCES = \
platform/stm32g0xx/startup_stm32g071rbtx.s
@ -46,14 +34,11 @@ CPU = -mcpu=cortex-m0plus
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
C_DEFS = \
-DUSE_HAL_DRIVER \
-DSTM32G071xx
C_INCLUDES = \
-I. \
-ICore \
-ILegacy/STM32G0xx_HAL_Driver/Inc \
-ILegacy/STM32G0xx_HAL_Driver/Inc/Legacy \
-Iarch/CMSIS/Device/ST/STM32G0xx/Include \
-Iarch/CMSIS/Include \
-Iplatform/stm32g0xx

166
arch/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h
View File

@ -1,95 +1,10 @@
/**
******************************************************************************
* @file stm32g0xx.h
* @author MCD Application Team
* @brief CMSIS STM32G0xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32G0xx device used in the target application
* - To use or not the peripherals drivers in application code(i.e.
* code will be based on direct access to peripherals registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Apache License, Version 2.0,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/Apache-2.0
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32g0xx
* @{
*/
#ifndef STM32G0xx_H
#define STM32G0xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32G0)
#define STM32G0
#endif /* STM32G0 */
/* Uncomment the line below according to the target STM32G0 device used in your
application
*/
#if !defined (STM32G071xx) && !defined (STM32G081xx) && !defined (STM32G070xx) \
&& !defined (STM32G030xx) && !defined (STM32G031xx) && !defined (STM32G041xx) \
&& !defined (STM32G0B0xx) && !defined (STM32G0B1xx) && !defined (STM32G0C1xx) \
&& !defined (STM32G050xx) && !defined (STM32G051xx) && !defined (STM32G061xx)
/* #define STM32G0B0xx */ /*!< STM32G0B0xx Devices */
/* #define STM32G0B1xx */ /*!< STM32G0B1xx Devices */
/* #define STM32G0C1xx */ /*!< STM32G0C1xx Devices */
/* #define STM32G070xx */ /*!< STM32G070xx Devices */
/* #define STM32G071xx */ /*!< STM32G071xx Devices */
/* #define STM32G081xx */ /*!< STM32G081xx Devices */
/* #define STM32G050xx */ /*!< STM32G050xx Devices */
/* #define STM32G051xx */ /*!< STM32G051xx Devices */
/* #define STM32G061xx */ /*!< STM32G061xx Devices */
/* #define STM32G030xx */ /*!< STM32G030xx Devices */
/* #define STM32G031xx */ /*!< STM32G031xx Devices */
/* #define STM32G041xx */ /*!< STM32G041xx Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number $VERSION$
*/
#define __STM32G0_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32G0_CMSIS_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */
#define __STM32G0_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
@ -99,14 +14,6 @@
|(__STM32G0_CMSIS_VERSION_SUB2 << 8 )\
|(__STM32G0_CMSIS_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32G0B1xx)
#include "stm32g0b1xx.h"
#elif defined(STM32G0C1xx)
@ -135,77 +42,8 @@
#error "Please select first the target STM32G0xx device used in your application (in stm32g0xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
SUCCESS = 0,
ERROR = !SUCCESS
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
/*#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))*/
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32g0xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif
#endif /* STM32G0xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
#endif

25
platform/stm32g0xx/Gpio.cc
View File

@ -9,38 +9,23 @@ Gpio::Gpio(Port port, uint32_t pin, Mode mode, Pullup pullup, AlternateFunction
switch(port) {
case Port::PORT_A:
this->port = GPIOA;
/* Enable PORT A clock*/
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN);
RCC->IOPENR |= RCC_IOPENR_GPIOAEN; // Enable PORT A clock
break;
case Port::PORT_B:
this->port = GPIOB;
/* Enable PORT B clock*/
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN);
RCC->IOPENR |= RCC_IOPENR_GPIOBEN; // Enable PORT B clock
break;
case Port::PORT_C:
this->port = GPIOC;
/* Enable PORT C clock*/
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN);
RCC->IOPENR |= RCC_IOPENR_GPIOCEN; // Enable PORT C clock
break;
case Port::PORT_D:
this->port = GPIOD;
/* Enable PORT D clock*/
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN);
RCC->IOPENR |= RCC_IOPENR_GPIODEN; // Enable PORT D clock
break;
case Port::PORT_F:
this->port = GPIOF;
/* Enable PORT F clock*/
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN);
/* Delay after an RCC peripheral clock enabling */
READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN);
RCC->IOPENR |= RCC_IOPENR_GPIOFEN; // Enable PORT F clock
break;
}
this->pin = pin;

6
platform/stm32g0xx/IndependentWatchdog.cc
View File

@ -2,6 +2,10 @@
using namespace perinet::platform::stm32g0xx;
#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */
#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */
#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */
IndependentWatchdog::IndependentWatchdog(uint32_t window, uint32_t reload)
: window(window)
, reload(reload)
@ -17,7 +21,7 @@ void IndependentWatchdog::enable()
IWDG->KR = IWDG_KEY_WRITE_ACCESS_ENABLE;
// Write to IWDG registers the Prescaler & Reload values to work with
IWDG->PR = IWDG_PRESCALER_4;
IWDG->PR = 0; // IWDG prescaler set to 4
IWDG->RLR = this->reload;
// If window parameter is different than current value, modify window register

42
platform/stm32g0xx/low_level_interrupt.cc Normal file
View File

@ -0,0 +1,42 @@
#include "delay.h"
extern "C"
{
void NMI_Handler(void);
void HardFault_Handler(void);
void SVC_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
}
volatile uint32_t tick_ms;
void NMI_Handler(void)
{
while (1);
}
void HardFault_Handler(void)
{
while (1);
}
void SVC_Handler(void)
{
}
void PendSV_Handler(void)
{
}
void SysTick_Handler(void)
{
tick_ms++;
}
void delay_ms(uint32_t time_ms)
{
uint32_t tickstart = tick_ms;
while ((tick_ms - tickstart) < time_ms);
}

1
platform/stm32g0xx/startup_stm32g071rbtx.s
View File

@ -96,6 +96,7 @@ LoopFillZerobss:
/* Call static constructors */
bl __libc_init_array
@ bl system_early_init
/* Call the application s entry point.*/
bl main

352
platform/stm32g0xx/stm32g0xx_hal_conf.h
View File

@ -1,352 +0,0 @@
/**
******************************************************************************
* @file stm32g0xx_hal_conf.h
* @author MCD Application Team
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_CONF_H
#define STM32G0xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
/* #define HAL_ADC_MODULE_ENABLED */
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_COMP_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_EXTI_MODULE_ENABLED */
/* #define HAL_FDCAN_MODULE_ENABLED */
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
#define HAL_IWDG_MODULE_ENABLED
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_PCD_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## Register Callbacks selection ############################## */
/**
* @brief This is the list of modules where register callback can be used
*/
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
#define USE_HAL_CEC_REGISTER_CALLBACKS 0u
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
#define USE_HAL_DAC_REGISTER_CALLBACKS 0u
#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u
#define USE_HAL_HCD_REGISTER_CALLBACKS 0u
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
#define USE_HAL_I2S_REGISTER_CALLBACKS 0u
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
#define USE_HAL_PCD_REGISTER_CALLBACKS 0u
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
/* ########################## Oscillator Values adaptation ####################*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
/**
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
* This internal oscillator is mainly dedicated to provide a high precision clock to
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
* which is subject to manufacturing process variations.
*/
#if !defined (HSI48_VALUE)
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
The real value my vary depending on manufacturing process variations.*/
#endif /* HSI48_VALUE */
#endif
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S1 peripheral
* This value is used by the RCC HAL module to compute the I2S1 clock source
* frequency.
*/
#if !defined (EXTERNAL_I2S1_CLOCK_VALUE)
#define EXTERNAL_I2S1_CLOCK_VALUE (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/
#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
/**
* @brief External clock source for I2S2 peripheral
* This value is used by the RCC HAL module to compute the I2S2 clock source
* frequency.
*/
#if !defined (EXTERNAL_I2S2_CLOCK_VALUE)
#define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/
#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
#endif
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* ################## CRYP peripheral configuration ########################## */
#define USE_HAL_CRYP_SUSPEND_RESUME 1U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include modules header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32g0xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32g0xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32g0xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32g0xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32g0xx_hal_adc.h"
#include "stm32g0xx_hal_adc_ex.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32g0xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_COMP_MODULE_ENABLED
#include "stm32g0xx_hal_comp.h"
#endif /* HAL_COMP_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32g0xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32g0xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32g0xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32g0xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32g0xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_FDCAN_MODULE_ENABLED
#include "stm32g0xx_hal_fdcan.h"
#endif /* HAL_FDCAN_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32g0xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32g0xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32g0xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32g0xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32g0xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32g0xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32g0xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32g0xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32g0xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32g0xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32g0xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32g0xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32g0xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32g0xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32g0xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32g0xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32g0xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for functions parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t *file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

34
platform/stm32g0xx/stm32g0xx_hal_msp.c
View File

@ -1,34 +0,0 @@
#include "main.h"
void HAL_MspInit(void)
{
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
HAL_SYSCFG_StrobeDBattpinsConfig(SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE);
}
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance == USART2) {
__HAL_RCC_USART2_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
GPIO_InitStruct.Pin = USART2_TX_Pin | USART2_RX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_USART2;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
}
}
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance == USART2) {
__HAL_RCC_USART2_CLK_DISABLE();
HAL_GPIO_DeInit(GPIOA, USART2_TX_Pin | USART2_RX_Pin);
}
}

27
platform/stm32g0xx/stm32g0xx_it.c
View File

@ -1,27 +0,0 @@
#include "main.h"
#include "stm32g0xx_it.h"
void NMI_Handler(void)
{
while (1) {
}
}
void HardFault_Handler(void)
{
while (1) {
}
}
void SVC_Handler(void)
{
}
void PendSV_Handler(void)
{
}
void SysTick_Handler(void)
{
HAL_IncTick();
}

65
platform/stm32g0xx/stm32g0xx_it.h
View File

@ -1,65 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32g0xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32G0xx_IT_H
#define __STM32G0xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void NMI_Handler(void);
void HardFault_Handler(void);
void SVC_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
#ifdef __cplusplus
}
#endif
#endif /* __STM32G0xx_IT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

133
platform/stm32g0xx/system_stm32g0xx.c
View File

@ -1,5 +1,7 @@
#include "stm32g0xx.h"
#define SYS_TICK_PRIO 0
#if !defined (HSE_VALUE)
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
@ -34,14 +36,6 @@ uint32_t SystemCoreClock = 16000000UL;
const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL};
const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
void SystemInit(void)
{
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
void SystemCoreClockUpdate(void)
{
@ -84,7 +78,7 @@ void SystemCoreClockUpdate(void)
break;
case 0x00000000U: /* HSI used as system clock */
default: /* HSI used as system clock */
hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos));
hsidiv = (1UL << ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos));
SystemCoreClock = (HSI_VALUE/hsidiv);
break;
}
@ -94,3 +88,124 @@ void SystemCoreClockUpdate(void)
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
void SystemClock_Config(void)
{
/* Modify voltage scaling range */
uint32_t tmp = PWR->CR1;
tmp &= ~(PWR_CR1_VOS);
tmp |= PWR_CR1_VOS_0; //Voltage scaling range 1
PWR->CR1 = tmp;
/* Wait until VOSF is reset */
while((PWR->SR2 & PWR_SR2_VOSF) == PWR_SR2_VOSF);
/* HSI clock config */
tmp = RCC->ICSCR;
tmp &= ~(RCC_ICSCR_HSITRIM);
tmp |= (64U << RCC_ICSCR_HSITRIM_Pos); // Default HSI calibration trimming value
RCC->ICSCR = tmp;
/* Adjust the HSI16 division factor */
tmp = RCC->CR;
tmp &= ~(RCC_CR_HSIDIV); // HSI clock is not divided
RCC->CR = tmp;
/* Update the SystemCoreClock global variable with HSISYS value */
SystemCoreClock = (HSI_VALUE / (1UL << ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos)));
/* Adapt Systick interrupt period */
SysTick_Config(SystemCoreClock / 1000U); // 1kHz
NVIC_SetPriority(SysTick_IRQn, SYS_TICK_PRIO);
/* LSI config */
/* Disable the Internal Low Speed oscillator (LSI). */
RCC->CSR &= ~(RCC_CSR_LSION);
/* Wait till LSI is disabled */
while ((RCC->CSR & RCC_CSR_LSIRDY) != 0U);
/* PLL config */
/* Disable the main PLL. */
RCC->CR &= ~(RCC_CR_PLLON);
/* Wait till PLL is ready */
while ((RCC->CR & RCC_CR_PLLRDY) != 0U);
/* Configure the main PLL clock source, multiplication and division factors. */
tmp = RCC->PLLCFGR;
tmp &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR);
tmp |= RCC_PLLCFGR_PLLSRC_HSI; // HSI clock selected as PLL entry clock source
tmp |= (8 << RCC_PLLCFGR_PLLN_Pos);
tmp |= RCC_PLLCFGR_PLLP_0; // PLLP division factor = 2
tmp |= RCC_PLLCFGR_PLLQ_0; // PLLQ division factor = 2
tmp |= RCC_PLLCFGR_PLLR_0; // PLLR division factor = 2
RCC->PLLCFGR = tmp;
/* Enable the main PLL. */
RCC->CR |= RCC_CR_PLLON;
/* Enable PLLR Clock output. */
RCC->PLLCFGR |= RCC_PLLCFGR_PLLREN /*!< PLLRCLK selection from main PLL */;
/* Wait till PLL is ready */
while ((RCC->CR & RCC_CR_PLLRDY) == 0U);
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
tmp = FLASH->ACR;
tmp &= ~(FLASH_ACR_LATENCY);
tmp |= FLASH_ACR_LATENCY_1; // FLASH Two wait states
FLASH->ACR = tmp;
/* Check that the new number of wait states is taken into account to access the Flash
memory by polling the FLASH_ACR register */
while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */);
/* HCLK config */
/* Set the highest APB divider in order to ensure that we do not go through
a non-spec phase whatever we decrease or increase HCLK. */
tmp = RCC->CFGR;
tmp &= ~(RCC_CFGR_PPRE);
tmp |= (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0); // HCLK divided by 16
RCC->CFGR = tmp;
/* Set the new HCLK clock divider */
tmp = RCC->CFGR;
tmp &= ~(RCC_CFGR_HPRE); // SYSCLK not divided
RCC->CFGR = tmp;
/* SYSCLK config */
tmp = RCC->CFGR;
tmp &= ~(RCC_CFGR_SW);
tmp |= RCC_CFGR_SW_1; // PLL selection as system clock
RCC->CFGR = tmp;
while ((RCC->CFGR & RCC_CFGR_SWS) != (RCC_CFGR_SW_1 << RCC_CFGR_SWS_Pos));
/* PCLK1 Configuration */
tmp = RCC->CFGR;
tmp &= ~(RCC_CFGR_PPRE); // HCLK not divided
RCC->CFGR = tmp;
SystemCoreClock = 64000000;
/* Configure the USART2 clock source */
tmp = RCC->CCIPR;
tmp &= ~(RCC_CCIPR_USART2SEL); // APB clock selected as USART2 clock
RCC->CCIPR = tmp;
}
void SystemInit(void)
{
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
FLASH->ACR |= FLASH_ACR_PRFTEN;
SysTick_Config(SystemCoreClock / 1000U); // 1kHz
NVIC_SetPriority(SysTick_IRQn, SYS_TICK_PRIO);
RCC->APBENR2 |= RCC_APBENR2_SYSCFGEN;
RCC->APBENR1 |= RCC_APBENR1_PWREN;
/* Change strobe configuration of GPIO depending on UCPDx dead battery settings */
uint32_t tmp = SYSCFG->CFGR1;
tmp &= ~(SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE);
tmp |= (SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE);
SYSCFG->CFGR1 = tmp;
SystemClock_Config();
}